Description
- -----Hardware Configuration:3.2 inch TFT 240*320 screen,Navigation switch,Audio output,Microphone input,DC 2.1 interface,4 layers of gold plating,ROSH process.Add the PortaPack to your Software Defined Radio HackRF and leave your laptop! The PortaPack connects to your HackRF and adds an LCD touchscreen, navigation controls, headphone jack, real time clock, micro SD card slot.
- -----Just add a USB battery and explore the radio spectrum anywhere, anytime. PortaPack firmware for fast ARM processors in your HackRF. No computer required (except for firmware reprogramming).Sleep mode saves energy only by turning off the display.If your Blue HackRF does not have a headband attached, there should be no mechanical issues.
- -----Function:3.2 inch, 240 x 320 RGB LCD with resistive touch panel.Four-way arrow buttons, wheel and select button.Coin battery saves settings and date/time.Micro SD card slot for data and storage.SSB, AM, Narrowband FM, Wideband FM audio reception with cascaded spectrum.
- -----Broadband (18MHz) spectrum and cascade analysis.Monitoring Ships (AIS), Vehicles (TPMS), E Utility Counter Transponders (ITRON ERT).HackRF mode runs HackRF firmware for host software.Calibrate PPM for more accurate adjustment.
- -----feature:When you put the PortaPack in "HackRF Mode", your HackRF will continue to use the computer-based software.PortaPack is only compatible with HackRF Uno. It is not compatible with the first HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should be fine. Compatibility with HackRF is experimental.
- ----- The proprietary reports good results with less interference between the audio capacitor PortaPack and the mechanical headband.
- -----PortaPack requires an external battery. Any USB-connected battery should work, although they vary widely in quality, and a poorly designed battery can inject a noise voltage regulator into the radio.PortaPack and Un's HackRF will not replace your handheld ham radio receiver. Reception sensitivity varies by frequency band, but performance is not as good as true amateur radio reception
Details: Hardware Configuration: -3.2 inch TFT 240*320 screen - Navigation switch -Audio output - Microphone input -DC 2.1 interface -4 layers of gold plating -ROSH process Add the PortaPack to your Software Defined Radio HackRF and leave your laptop! The PortaPack connects to your HackRF and adds an LCD touchscreen, navigation controls, headphone jack, real time clock, micro SD card slot. Just add a USB battery and explore the radio spectrum anywhere, anytime. PortaPack firmware for fast ARM processors in your HackRF. No computer required (except for firmware reprogramming). Function: -3.2 inch, 240 x 320 RGB LCD with resistive touch panel. - Four-way arrow buttons, wheel and select button. - Coin battery saves settings and date/time. - Micro SD card slot for data and storage -SSB, AM, Narrowband FM, Wideband FM audio reception with cascaded spectrum. - Broadband (18MHz) spectrum and cascade analysis. - Monitoring Ships (AIS), Vehicles (TPMS), E Utility Counter Transponders (ITRON ERT). -HackRF mode runs HackRF firmware for host software. - Calibrate PPM for more accurate adjustment. - Sleep mode saves energy only by turning off the display. feature: - When you put the PortaPack in "HackRF Mode", your HackRF will continue to use the computer-based software. -PortaPack is only compatible with HackRF Uno. It is not compatible with the first HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should be fine. Compatibility with HackRF is experimental. The proprietary reports good results with less interference between the audio capacitor PortaPack and the mechanical headband. If your Blue HackRF does not have a headband attached, there should be no mechanical issues. -PortaPack requires an external battery. Any USB-connected
