OVERTURE PLA Filament 1.75mm,Filament PLA 1kg Spool(2.2lbs), Fit Most FDM Printer, Dimensional Accuracy +/-0.02mm(White)

The overture "Royal Gold" PLA is a really dark, slightly shiny.On flat surfaces it catches the light quite nicely, but on round or curved prints, it looks quite dull unless it's directly under bright light.It prints well enough, smooth, no bubbles or spitting from the hot end and I'm 1/3 or the way through a 1KG roll with no clogs.The reel is cardboard, and it doesn't smoothly roll on the standard ender 3 spool holder, the cardboard wants to grip, so the reel gets tight against the extruder, but this was easily fixed by printing a round insert.It's reasonably cheap as filaments go, but I've found that it _really_ like to warp and shrink on the first few layersI printed with the bed at 55C, and the hotend at 195, printing with a 2 layer raft and this seemed to fix my problems of warping.

The media could not be loaded.  it can tangle quite frequently on fresh reels added straight from the packaging but if you're lucky to get a good reel everything should run smoothly. you can print immediately from the package, this product is packed with a desiccant which aids with keeping moisture out of the printing process.

Love the colour choices, no problems during printing after the initial filament profile.I bought a lot of them...only one was a bit brittle and was breaking easily. After drying it for few hours prints fine.

Even at high temps 215+ its still quite matte. Saying that tho' I can recommend their filament for print quality and no stringing even at the higher temp.

Looks the part! Printed a golden picture frame with it and was happy with the result.

Nice filament, sticks to the bed well, nice color, lost 2 stars due to a tangle tho. for those who don't know, tangles are where filament gets tied around itself on a spool and then will not be come out of the spool anymore. This of course causes a failed print and can cause cloga or even in extreme (although rare) cases can damage to the printer. This is why you have to be careful to not tangle the filemant when you change it. For a tangle to be found on a new roll is not good at all.

Was a little sceptical buying based on reviews about tangled and bad quality. No tangles and prints like butter. Re printed my printer mods at 0.2mm would buy again.

I like it at first it did not glow but after a couple of day it start to and now looks lovely