Super Bright Warm White Under Cabinet LED Light Kit

My desk sits in a poorly lit corner of my home. There is minimal ambient light. I have tried twice to remedy the darkness with LED lights on narrow strips of plastic tape. Both installations have failed miserably. I found this new product from Litrever, that looked to me like traditional lights, albeit very much smaller. The lights come in 12” lengths, and they are very thin. . .which was critical for lighting my keyboard, which slides out for use. I am EXTREMELY SATISFIED (Elated!) with this product. The previous light strips were a pain to install, looked awful behind the computer and under the desk, and they each lasted about a year.. This is my third effort to fix the lighting, and it is a huge success! My keyboard is well lit, and the back lighting on my computer is great. Litever (the company selling this product) provides outstanding support items, like extension cords to allow for spacing between the lights, ample double stick tape to secure the lights, plus several types of adhesive connectors to hold the wiring in place under the desk and on the back of my monitor. Included are BOTH a dimmer switch AND an on/off switch. I did buy a 2-way splitter so that I could dim the lights on my keyboard without dimming the lights on the back of the monitor. I don’t recall being this pleased with an online purchase, maybe ever. It takes some time to install, but it is intuitive and easy to figure out. Photos are: 1) lights on back of computer, 2) view of wiring under the desk (looking up from the floor. . . the dimmer switch is visible), and 3) the final product: my new desk lighting! Thank you Litever!! OUTSTANDING PRODUCT. RWL75

Easy to install. Works exactly as intended. Lots of extra parts for installing in any space. Easy to hide wiring with all the clips and zips. Dimmer or switch or both! Love it! I want to install them in the kitchen too!

Not spectacular but also well above expectations. I know a bit about electrical work and carpentry so it made the job a bit easier. I bought 2 kits to run under cab and top cabinet lighting. Love the dimming dial. Self adhesive strips are a B to get the coating off but do a lot of planning and lay out before doing this. I drilled maybe 2 holes with a small paddle bit for install. Other than that, easy to use. Had it for 2 months installed now and still good. May require imagination to conceal running wires and excess wire. For the price and what I see, good deal.

Nice kit. Has lots of extras, tons of adhesive mounts and wire holds. I installed it about 20 minutes, as soon as I opened the box. I love the under cabinet lighting look. Much better than overhead light. Dim for mood, bright for cooking. Great kit for the price.

These lights are great, BUT be aware of the dimmer switch incompatibility. You HAVE to use the included dial dimmer. Not a deal breaker considering the price, but it seems silly to be tied to using the old school dimmer, ESPECIALLY because they can be hardwired. I opted to used the Topgreener dual load switch even though it only works as an on off switch for these lights. I mounted the included dimmer discreetly directly above the switch in the cavity between the side of the cabinet and the wall. Not as clean as I’d originally hoped but they do the trick and I can still dim the lights over my island with the other slider.

I’m really impressed with these Litever LED under cabinet lights! I purchased the super bright lights. They arrived right on time thanks to Prime, and installation was super straightforward. I definitely recommend using the included clips—they made attaching the lights quick and secure. Once installed, they completely transformed my kitchen. The lighting adds such a beautiful glow and really elevates the look of my backsplash and countertops—total glam upgrade! Highly recommend this product if you’re looking for an easy way to enhance your space.

Installed 6 months ago. We have been very happy with these lights up until this past week. The junction box has began humming. It is faint when lights are at lowest setting, but gets louder as the rheostat is turned up. We typically leave them at about 50% and never go above about 80%. We thought it would extend the life of them. We also shut them off at night most of the time so they haven’t just been running for 6 months straight. Although, I feel like they are made to leave on continuously. Maybe we just have a faulty part in the junction box.

Still delighted after a month--and just purchased another pack of 6 for the kitchen. There is one thing that I wished were included: a clip to hold the power pack under cabinet and out of sight. SO impressed with this product! Arrived with everything I could possibly need (except tools, of course) to install it, including parts for options I did not use (but saved for later in case I change my mind). The lights are 12" each and connected via daisy chain. There is an end cap for the last light. I have a large workbench so I needed 2 packs--12 total lights. I did try connecting more than six in a chain and it did work, but the lights became a bit dimmer. I wasn't sure if this would overtax the power supply, so installed them as directed. The included brackets screw into the surface to which the light is attached and the lights snap right in. They do not have to be exact; the ribbed sides allow for the lights to be shifted left or right a bit, depending on how close you put the bracket to the end of the light. I found 7" to be about right--with about 2 1/2" inches on either side for final side-to-side adjustment. Hardware for hiding the additional wiring is included as well as a 40" extension cord for each light so they can be spaced nearly 4' apart. Installation took only a few minutes and the result is exactly what I hoped to achieve. Kudos to Litever for a superb product!