the fans dont spin but show rgb, i plugged them with a sata cable to my psu and my argb cord doesnt fit my motherboard since its a 3 pin connector?

Confused about the RBG lighted fans? Montech doesn't explain much about them. The case fans have their own controller, they are all plugged into it when your case arrives. First unwrap the velcro ties that hold all the wiring and find the wires that all the fans are connected together with. 1. There is a wire that comes with the case that plugs into the bottom of the fan controller hub on the case, and the other end plugs into the 3 pin RGB controller at the bottom of your motherboard. This is how you gain control with your motherboard. However, the lights have a seemingly endless number of effects that can be controlled by the reset button on the case utilizing the case mounted controller. Notice the reset button is plugged into the top of the RGB case mounted controller. Simply pressing the reset button changes the patterns and colors of the RGB lights in the fans. To change control of the lights between the case controller and your motherboard, hold the reset button down for 3 seconds once you get everything hooked up and working. 2. There is a black power connector on the fan leads that plugs into a connector on a standard SATA power cable. This is what powers the LED lights. 3. There is a single white fan power connector attached to the fan leads that plugs into the #1 Aux/Case Fan connector on your motherboard. This is what powers the fans. All the fans spin at the same rate together off the one plug, they are all wired together. If you hook it all up as outlined, everything will work with about 20-ish different LED patterns and colors you can cycle through with your motherboards RGB controller software, or by simply pressing the reset button on the case. You switch between the 2 methods of control by holding the reset button down for a few seconds. You will see all the fans flash when the setting is changed from the case controller to your motherboard controller. (you will need to install the RGB controller software for your motherboard to make the motherboard controller work)

Will the case support this motherboard https://www.amazon.com/gp/aw/d/b09qfsbr8x/ref=ox_sc_act_image_3?smid=ahg2mi785yuy7&psc=1

Yes it is plenty big enough to support any size mother board. I feel like I should add the "usb 3.0" ports on the case are actually usb 1.0.

How much power does the fans take

I'm not sure but case fans usually use 1.8 watts but should be in a range of 1-4 watts.

Desertcart Logo

Join PRO & Unlock Exclusive Perks!

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan

Customer Services

About Us

Customer Support

Our Other Brands:Hewyn|Selfship

Reviews

B**N

The case itself is great to build in, with plenty of space and openings to route cables; I had no issues getting anything to reach its intended destination. Excellent airflow/thermal performance - the pre-installed fans move a lot of air, and the ARGB is nice. The included fan hub worked perfectly with my B850 Tomahawk motherboard. Chief Downside: The exhaust fan has very noticeable coil whine, and can't be set above 20% speed without driving me crazy; it's like having a dentist's drill whirring right next to me. I detached this fan from the hub to run it at a constant low speed, thus allowing the intake fans (which do not have any coil whine) to run an actual curve. I will replace the exhaust fan at some point; you should budget the cost of a new fan into the cost of this case, imo.

2.01.2026

G**O

Completo di tutto! Ben fatto. Gestione cavi molto semplice. Fornito di 4 ventole: 3 avanti e 1 dietro gestibili in velocità e colore dalla mobo volendo tramite l'hub ventole stesso di cui è provvisto. Soddisfatto. Forse è leggermente sovraprezzato ma va bene. Design molto minimal! Non trovo difetti da riportare: forse il fatto che le porte dove va ancorara la scheda video vanno spezzate(?)

2.06.2023

H**R

Purchased as many as I could on sale for my home business and couldn't be happier with the quality!

16.08.2025

J**N

I've personally built more than 15 computers, but i can say this will be a very nice case for a beginner. There's lots of room for cables and overall, i couldn't find any flaw's like every other case has. I just wish it was a little cheaper, i paid 60 euro but i would use it again. By the way, you can change the colors, there is a button up at the top and there are lots of colors to choose from.

30.12.2024

J**G

The size in not big or small, its perfect for micro build and has pre installed 4 fans, 330mm max length for the gpu..

26.09.2025

ASIN	B093S1H4G2
Are Batteries Included	No
Best Sellers Rank	#42,690 in Computers ( See Top 100 in Computers ) #300 in Computer Cases
Brand	Montech
Color	Black
Computer Memory Type	DIMM
Customer Reviews	4.7 4.7 out of 5 stars (910)
Date First Available	18 June 2021
Item Weight	6 Kilograms
Item model number	AIR 100 ARGB
Manufacturer	Montech
Number of USB 2.0 Ports	1
Number of USB 3.0 Ports	2
Product Dimensions	40.5 x 21 x 42.5 cm; 6 kg
Series	AIR 100 ARGB Black

Montech AIR 100 ARGB Micro-ATX Tower with Four ARGB Fans Pre Installed, Ultra-Minimalist Design, Fine Mesh Front Panel, High Airflow, Unique Side Swivel Tempered Glass, Black

Details

Description

Specifications

Reviews

Common Questions