KSP 2in Level Kits for F150 2004-2025,2" Front Leveling Lift Kits Compatible with Expedition 03-18,Mark LT 2005-2008, Aluminum Forged Strut Spacers Raise the Truck 2inch（Package of 2pcs）

Great quality easy to install I installed the upper control arms also

It was just what I was looking for

Product is pretty straight forward. It works as intended and wasn’t too bad to install. I have the 2.5” puck. Rides great, looks great and is affordable.Aligning it was difficult. I’m right at the edge of where it’s not going to wear the tires unevenly. On the machine, it’s a little off. That being said, I would recommended getting UCA’s to play it safe. It will correct the angle of the ball joint and allow for a better alignment

It took me 3 hours to install this. Just a suggestion - you will need the help of your favorite beer of choice and just about every cuss word in the book, however, for 60 bucks, great product. It did exactly what I needed it to do. My 2019 f150 stx with a 5.0 V8 still sat "not leveled" with a (2-1/4" level) / (2.5" level) (can't remember what I put in first) and this did it perfect, my front end sits a 1/4" higher than the rear which is the look I was going for. My cab sits level, and its the perfect look with 35's. (Panties drop every time I drive by and let the straight pipes eat) On a serious note, you will need 2 people to install this, one with a pry bar straining the piss outta your stock suspension just so you can get the strut out, and go ahead and pray to Jesus you can get the thing back in there with an extra 2.5" on the top of it. Make sure you don't over tighten bolts anywhere when putting it on, and be sure to disconnect brake system and the biggest issue was the 4wd. At least on the f150's they are vacuum sealed, unlike the 250's and 1 tons, and you have to take a nut off of a bolt behind the dust cap in the center of the hub in order to slide 4wd off. Once you free everything up, have fun, turn some wrenches, and learn a thing or two!!I'm not sure if I can edit a review, but I will add photos if I can,Thanks for taking the time to read!

Bought these over the 2” lift due to running a bed cover and bed sliding tray so the back is lower than an empty. Install is a pain, so do it when you need new shocks. The product itself is easy to add on. Hardware is good quality etc. The reason this is not a 5 star is one of the holes for mounting to the shock was not in perfect alignment. Result was difficulty getting a socket on the nut to tighten it down. I had to tap the socket on the with a hammer and then slowly tap it off when it was torqued. If I could have I would have returned the product, but one side was completed and the thought of pulling it apart to return wasn’t much of an option.Update: Seller contacted me with a full refund. Great customer service!

Awesome 😎

Well, let me tell you about my experience with the KSP 2.5" Leveling Lift Kit for the front of my vehicle – it was a real rollercoaster ride with a twist of humor and a cherry on top, thanks to their outstanding customer service!So, picture this: I'm not exactly what you'd call a "mechanical genius." In fact, my toolkit consists of a hammer and a roll of duct tape, but I thought, "How hard could it be to install a leveling lift kit?" Well, let me tell you, it was like asking a goldfish to play chess. But fear not! The folks at KSP were my knights in shining armor (or should I say overalls?).As I began this automotive adventure, I had more questions than answers. I mean, what's a torsion key, anyway? But the KSP customer service team was there for me, answering my queries with the patience of a saint. They didn't even laugh when I asked if I should use a left-handed screwdriver – now that's commitment to customer service!With their guidance, I somehow managed to piece everything together. The instructions were clearer than a glass of purified mountain spring water, and even a DIY klutz like me found my way around. Sure, there were some head-scratching moments, but that's all part of the fun, right?As I lowered my car from the jack, I expected it to either take off like a rocket or collapse into a heap of twisted metal. But no, it actually looked leveled! I was as proud as a penguin in a tuxedo.But here's the best part: the leveling kit actually worked! My car was level, the ride was smoother, and I felt like the king of the road. I swear, I drove over speed bumps just for the thrill of it, and I could practically hear my car saying, "Thanks for the lift!"In conclusion, the KSP 2.5" Leveling Lift Kit not only lifted my vehicle but also my spirits. With their top-notch customer service, even someone as mechanically challenged as me managed to pull it off without major mishaps. It's like they say, "With great leveling power comes great responsibility – and a ton of laughter!" If you're in need of a lift and a good chuckle, KSP has got your back (and your front wheels too)!

Application was a 2020 F 150 4x4, 4 door with 6.5' bed... This item was 1 5/8" thick and was exactly what was needed to compensate for the leveling I needed. I bought the truck with a 1 3/8" leveling block kit already installed but the front and rear were at least 1.5" different. I knew the geometry may solve the problem with the extra 1/4", and IT DID. Solid product, no complaints for install. Had it realigned afterward but no evidence that was needed.