ATS Acoustics Panel 24x48x2 Inches, Beveled Edge, in Ivory

These check all the boxes for what an acoustic panel should be. The price is more affordable than other options and the quality seems fine. Shipping was quick. They were easy to install with the included template. I had enough parts. Everything hangs nice and straight. Most importantly, the sound in my studio is now more neutral and smoother, no harsh reflections. The only comment I’d offer to the manufacturer is that you should include more than one paper hanging template for larger orders. I had to use the one template to mount 7 panels and it was getting pretty ragged toward the end.

I was looking at these panels to provide acoustic absorption on my ceiling. I had already installed acoustic foam around the walls of my studio, and this appeared to be ideal for my ceiling space and "complete" the room. When I first received the panels I was a bit concerned with how heavy they were (24x48x2 inch panels). They actually weighed more than I expected. Granted: they are not super heavy for what they are, but when you are thinking of mounting these on the ceiling, you want to ensure they are not going to come down on top of you. The included Z clamps are NOT meant for ceiling installation (wall installation only) so I had to devise a solution that was going to secure them to the ceiling safely. I tried to research online the best way to do it which was also not terribly complicated (I am handy, but I would not write home about it). Unfortunately, nothing really suited my scenario. So I devised my own method of getting these panels ceiling mounted (with images included)... First Step: You want to buy two things. A set of 4 D hooks per panel (often used for picture / artwork frame installations), and ceiling anchor hooks (also 4 per panel). Both should be available at your local hardware store or warehouse. You will need 4 D hooks and 4 anchors per frame for a even installation and to distribute the weight. Second Step: You need to screw the D hooks into the back of the panels near to the corners. Go as close as possible to the edge of the panels / frame as this is where it will be thickest. Remember, the backs of these panels are simple sheets of project board nailed onto a thicker wood frame. The frame is what you want to screw into, not the board. Also make sure to not screw in the D hooks over where the fabric folds more than once. Third Step: Once you have mounted all 4 D hooks to the panels, you need to measure up where you want the panel to go on the ceiling. You will need someone to help you with this. Basically, do the math. Measure up the room and draw a diagram. Then you can use that diagram to determine where the board is going to be placed and give yourself a rough outline of where the hooks need to go. Remember: you only really need to focus on the first hook, because once that is up, it will act as a reference point for all the other hooks. You then drill your hole for the anchor hook, insert the anchor plug and screw the hook in place. Be sure to screw the hook a little tighter than what you would ordinarily feel comfortable with, as it is essential the anchor has fully "taken" to the ceiling. Once this first hook is up, you can simply measure the 4 D hook positions on the back of your panel to determine the positions of the other hooks relative to the first hook. Make sure you a constantly measuring from the wall as a second reference point to ensure things are straight. Last Step: With all four anchor hooks in place, simply lift up your panel and connect the anchor hooks to the D hooks and let it hang! This is where you may also need some help. I installed 3 of these panels on my ceiling and they do a phenomenal job reducing sound reflections providing excellent absorption! The room tone changed quite dramatically after they went up, and on top of the performance, the ivory color complimented the room perfectly! I can imagine the other colors will serve other rooms well. Overall, despite being a somewhat unique installation, it worked out perfectly and I couldn't be happier with the results!

If you need sound absorbing panels that will help decrease echos and appearance is important but not critical, these are highly recommended. They look pretty good but ATS also sells ones with a higher end looking fabric and tighter edges for just a bit more that are better if looks are very important to you. To be clear: What these do is to absorb sound so it doesn't deflect around a room causing echos. Sound absorbing is NOT going to stop sound from passing through a wall. We have a 30x21 foot modern room with 22' ceilings that's all hard surfaces and glass. 6 of these on the second level reduced RT60 times from 5+ seconds of echo down to 3 seconds. When a car drives by the echo made it sound worse than it is and so while these don't stop the noise from coming in, they make it seem less impactful. We couldn't have 2 conversations at the same time in that room and now it's possible. Still far from where we want to be but we know we need approximately 315 square feet to get to our goal and at 48 ft2 our panels made a bigger difference than expected. Other sound deadening tips: ATS also sells acoustic insulation. Use it to fill behind canvas art and wherever else you can. Also use memory foam carpet padding under any rugs, it is the singular most effective (and cheapest!) acoustic treatment we have found.

I used these as clouds in my recording studio's control room. They look great and sound great. I bought four and it came with "Z clip" hardware which worked great for mounting to the wall. I used simple ceiling hooks and screwed them into the back, and wired them to the ceiling. Very easy to install. These are light so they are easy to hold up and wire to the hooks in the ceiling. Definitely improvement in neutralizing early reflections and controlling bass build up in the control room. As always, you need to consider the placement for these to maximize acoustic control. Would purchase again.

I don’t expect to get any sound proofing from this just want to decrease the volume inside the room to avoid echo and sound level. Noticed a definite difference with 6 2x4 panels in a carpeted 12x13 ft room. Added some heavy drapes on the window also. Next step will consider hanging some from the ceiling but not sure if it’s going make a difference. I wish the cost of shipping was less expensive but the cost of the product is less than many comparable products. Fabric is nice enough for a non professional home studio. I would recommend the better fabric ones for a more professional environment or if you’re looking for more decorative material use these and cover with a different fabric that is acoustically appropriate. I tried to purchase melamine foam and make my own panels but it was hard to find the right size foam etc.