OSD Wireless 5.8GHz Subwoofer Kit Transmitter and Receiver, Fast Connection WSK-SUB

I was hesitant to buy this honestly, I have had bad experiences with wireless in the past but, with this device, absolutely no issues. Connected the front speaker wires per instructions, rear speakers per instructions, plugged in and instantly connected. I was getting popping noise but moving the mesh network receiver a ft away resolved that. This device allows me to connect my rear surround speakers in my open plan living room without the hassle of running speaker wires. My only objection is the power lights are really brighter, bought some light dimming stickers for a few dollars and that’s resolved. Highly recommend, sound is good.

See above. Easy setup too. Well done guys!

Allowed me to move my subwoofer to a back corner of the listening room wirelessly. Attempts to wire in and use of a 2.4 GHz transmitter both produced unacceptable noise. This device produces no unwanted noise and any signal delay is not audible to me.Initial pairing of TX and RX units didn't work as described in the instructions. What did work for me was to set the units side by side, power up both units, then press the "pair" button on the RX unit. So if you find that the instructions provided don't work for you, try my method instead.

I've had a surround sound system set up for years and used wireless for my subwoofer and it has worked great. A recent rearranging of things meant that I could no longer practically run a wire for my rear surround speakers. My current wireless setup for my sub was a single channel sub-only system so I needed a new one that could handle my surround speakers as well. This unit looked perfect. Thing that drew me to it were it's claimed 34 available wifi channels, to help avoid interference, and it's 100' line of sight range. My installation would be 25' with line of sight, should work great!Ultimately it was a nightmare.Setup was super easy, the units look great and are a good size. The indicators are clear enough to understand what is going on but I just couldn't get a wifi channel selected that didn't have some interference. The instructions say to press the M button on both devices at the same time (25' apart in my case) to change channels and avoid interference. You then wait 20 seconds or so for the devices to link up again and then I used the speaker setup/tuning white noise on my receiver to listen for the steadiness of the signal. After roping in members of my family to do this on three different occasions, taking roughly a minute per attempt, we could never find a 'channel' that didn't pop/breakup/fadeout/dropout within mere seconds.Additionally, the device gives no indication what 'channel' you are using. So does this procedure of pressing the M button on both devices dynamically select a channel that might work or are you cycling through the supposed 34 channels in order? We pressed the buttons (again simultaneously with two people 25' apart) 40+ times and never found a channel that worked, not even for a minute. I sent an email to OSD via the support address on their website asking how this channel changing really worked and for help avoiding interference. Over a week later no response at all.Hugely disappointing. I don't feel my house is super challenging for wifi interference. We have a single 2.4ghz wifi access point and we are in a detached single family home. We have some wifi overlap from our two closest neighbors but its nothing compared to what you might see in a townhouse, or condo/apartment situation. I'm returning this and simply cannot recommend it at all.

Bought this to relieve the agony of wired speakers in my room. This is a game changer. I only wished it supported more speakers. Now I have a stereo room where I can listen to my Jazz and some old school and just relax now that the kids have left the home. Good product.

Set up and it paired straight away, no issues with that. I've only had for a few days but sometimes signal only comes through one of.the surround speakers. Reinserting the cables seems to fix it, maybe I just hadn't inserted properly.Apart from that sound is fantastic.CheersNick

This wireless kit seems to work well. Front LED goes green, when pair are in standby. When subwoofer audio is presented to transmitter, it's LED goes blue and then the receiver's LED goes blue. Once both LEDs are blue, audio flows to the Subwoofer as expected. With this pair, audio does not drop out. Also, the pair stay linked for roughly 15mins.I like the fact that the pair tends to re-sync up by itself.I did notice that on my Pioneer Elite SC-57 receiver, when auto calibration is run, my sub-woofer comes up as 0ft away. I suspect that is to compensate for the ~20ms of latency induced by this kit, relative to the other speakers in the room(?).I was using the Rocketfish Bluetooth Kit from Best Buy... that set does not work very well at all.

The product works very well, even in a house with an IT guy and a ton of wireless networks happening all over the spectrum. Highly recommended. Works through three walls and across 40' well.

Arrived promptly, easy setup. but it doesn’t work very well. When connected as intended, there’s a significant drop in volume compared to a wired setup. No way to attenuate the volume.

Excelente producto, no necesitas cables para enviar el sonido; excelente para los detallistas que nos fijamos en todo

Worked for about a month. Got it end of April, installed in early May 24, and now its in June 24, and doesnt seems to be transmitting any more.Tested hardwired to my sub from my Yamaha Aventage , and subwooder is working just fine, its the issue with the transmitter.Wrote to their online contact on website, but no reply.

Unfortunately this did not work as expected. There was a static noise in the background that was rather irritating.

Mala calidad de recepción, compre 2 y los dos fallaron, me hicieron la devolución pero las tarifas de importación se perdieron, estando a solo 3 m de distancia se coertaba la señal y ademas era muy baja, si estas en México mejor no lo compres, le vas a perder $$$.