Clean + Easy Electrolysis Machine for Permanent Hair Removal - Non-Laser, Painless Electrolysis Hair Removal for Face & Body, At-Home Remover Device

This product came with everything but the 9 volt battery. The instruction pamphlet was descriptive, short and straight to the point. Its safe to operate because you are in control of the dial. It ranges from 1 to 10. I started off on a one and was able to work my way up to three within a couple of hairs. *Just make sure your not using it while soaking your feet, in the tub, or any other place where theres a basin of water. The set up is simple. Ive listed a few tips and things to look out for. To get started make sure your area is clear and your environment is free of distractions. You will need to focus on being precise for this. If you have some alcohol go ahead and wipe your pen, stylet, and tweezers down. Next youll want to put in your battery and prepare your salt water. I decided to wash my hands and face and pat dry with a clean paper towel. But you can get started as long as your hands are clean and your tools are sterile. The first thing you’ll want to look for is a beeping sound. I didnt see a whole lot of descriptions addressing this. It means that the pen is delivering an electrical current. The trick is to make sure that you feel a “tingling” or a “pulsing” sensation. This lets you know youre directing the current towards the follicle. This device works by zapping the follicles blood supply to prevent regrowth. When Done Correctly, Hair Removal IS PERMANENT! Lastly, you want to make sure to feel a tingling sensation and not stinging. If the skin is turning dark around the hair but no fluid is released from pore, you may be burning your skin. If this happens just remove your stylet (micro needle) from your skin and reinsert in a different position until you feel that tingling/pulsing sensation. Remember to be gentle, not only for your skin but also for your stylet, the needle is very small and delicate. You may bend or break it without great care. In the event it feels uncomfortable, its okay, just turn down the dial until you can handle it. If you dont get it within a couple of tries just be patient with yourself. You’ve probably had that hair for a long time, giving yourself a couple of days to find your groove is perfectly fine.You’ve already taken the first step by doing something about it. Becoming impatient with this device will cause you to burn your skin. If youre not trying to draw more attention to the area, its best to give yourself a little more time. Just make sure when youre done to do some after care with some non-comedogenic products. After your sessions you can apply a light moisturizer, but avoid the area you treated if there are exposed pores. If you must to go out, apply sunscreen!! This product delivers permanent results, and is an excellent trade for such a small price. If you are tired of waxing, picking, and plucking, then this is the device for you!

Does not work. I tried to use this device, off and on, for about 3 weeks, and other than the 1st day I couldn't get it to actually work while it was in my skin / hair follicle. The instructions are 100% CRAP! There is ZERO mention of the sound that is makes when it is "active". ( Had to read other reviews to learn that. ) Instructions didn't say that I should touch the "window" with my other hand that ALSO was supposed to have salt water on it. ( Had to read the "Troubleshooting" guide here on Amazon to learn that tidbit. ) The unit I had, also would trigger / sound even when the dial was turned to the 0 setting. Which, to anyone with 2 brain cells, would indicate that the unit is OFF / won't function. LOL The "storage" for the cord ( under the tray ) is a huge pain in the butt to get the cord out of, and an even bigger pain to put back. I cannot fault the tips for being fragile, as that is just the nature of a device like this. However, the stylus that you hold seems to NOT make the connection when one is holding it. But if you touch the stylus to the "window", magically it makes its sound. Maybe it is my skin type, or maybe I am just an idiot, or maybe I just got a bad unit. Either way, it is not worth keeping. I was prepared to "go the distance" with it, and diligently work my way around the areas of my body that I wanted to do. But when it takes 20 minutes just to get a random "buzzing" sound, and it wasn't even in my skin.... just nope.

So I got this to mostly to remove a uni-brow that's been bugging me for years. The good news is that it works, however you have to be extremely cautious specially around the face. One possible side effect of electrolysis is pitting of the skin (where it creates little craters that look like acne scars). I started with the 4 darkest hairs in my uni-brow and they all caused damage to the skin. Lucky because they were far enough from each other, my skin healed and closed the mini pits. I was freaking out for a few weeks though because they were very noticeable till they healed. With that said I'm having to wait a few months for it to completely heal before I go back for the rest so I don't risk pitting. Now the reason I think I damaged my skin is because of the product design. With this device you don't place the needle in, and then zap; it starts working as soon as it makes contact with the hair follicle. Meaning the product is always on. Because the needle is so thin, and you have to slide it in with the hair, it can be very hard to get the right angle. This is specially true if you're using a mirror or happen to have shaky hands at the time. The pen also has to be held a certain way to work which only makes it more difficult. I can imagine treating say leg hairs or even a bikini area as being far easier, but since the device's needle must go in with the hair, you got to be able to see it and this might mean getting magnifying glass stand. In all, if you have hair where you can't reach or even very dense hair areas, this is likely not a good choice of product. At the end of the day to make it work you'll need a lot of visibility, patience, and time. If you have that, then you can make this work.

When i put the needle on the metal plate it makes bee sond but when i put it on skin or in hair it do not beeb at all i try changing the salt and water constraint but it still doesn’t work.very disappointed and they will not return it or replace it

It’s not worth the money.

Using this product is hard, slow and painful. Also it leaves dark spots at the site of use. Better buy some laser epilator. Don't waste your money on this product.

I am writing to express my concern regarding the Clean + Easy Electrolysis Device (Order ID: [Insert your order ID]) that I received this morning. While I appreciate the care taken in packing the shipment, I was shocked to find the following issues upon opening the outer packaging: The product box was not sealed as new; it appeared opened. The box looked very old, almost as if it had been used before. Stickers on the box were covered by other empty stickers, giving the impression that the item was resold. Regarding the device itself, I cannot confirm if it is functioning properly at this time, as the needle seems almost gone.

Good at what it is suppose to do!