ULBTER Screen Protector for Canon EOS R3 Camera LCD + Top Screen [2+2Pack]

Fantastic product and les than 1/3 the price my local camera shop was trying to charge for similar product. This is a hard glass screen, was in perfect condition, very clear, installs without any bubbles, very responsive to touch. Essentially, it's perfect and for an amazing price. Installation wasn't so bad. It actually took me 3 attempts to lay the same glass piece but the final result had no bubbles, dust, or anything and you can barely tell it's even there. The screen still flips and folds back into the back of the camera with no issue. (I thought the extra thickness would be an issue, it's not at all). So, I first cleaned the screen with the lens cloth, I then used wet wipe 1 (it was not dry, like another user reported), then used dry wipe 2 to dry it off....I also gave it some time to air dry, then wiped it more. Once it was completely dry I used the dust stickers (included) to clear any small particles that got attracted to the screen from static charge. Peeled back the protective layer from the glass, lined it up the best I could and applied it. Attempt #1 was really bad so I very carefully lifted the glass back up. Go very slow to not flex then break the glass. I then pressed the glass against the right edge of the screen (there is a small lip you can use to help align the glass). I let it slowly lay down as it self-removed bubbles. Attempt #2 was slightly off on the bottom left where I went over the glass and onto the plastic frame....again I very slowly lifted the glass (very slowly) but this time I lined it up on the right ridge (mentioned above) then tilted it the slightest bit more so that the bottom left corner would sit properly once done. I let the glass go down very slowly and it all lined up. Attempt #3 because I let the glass down a bit too quick and there was a bubble. I tried to push it out but no luck so I put my fingernail under the bottom left corner and SUPER SLOWLY lifted the glass again. Once I got past the bubble I let the glass fall back down on its own. It worked perfect. (even after 3 attempts with the same piece). I can barely tell that it's even on. So, worth the money and now I have 2 more in a nice small case ready to go if I need them in the future. P.S. Normally when installing screen protectors on cell phones I spray the screen then install the protector, this lets me adjust the glass and work out any bubbles.....DO NOT use this method for this product. It goes on very smoothly and with no imperfections without the extra moisture. Just make sure you pull off that clear plastic film moments before you plan to install it (after cleaning the screen).

These screen protectors are an excellent way to protect your camera's display. They fit my Canon R7 perfectly and were quick and easy to install. I applied mine over a year ago, and it still looks great without needing to be replaced. The adhesive is strong, goes on smoothly, and leaves little to no visible blemishes or bubbles. I highly recommend these to anyone looking to keep their camera screen protected.

well worthy investment, this product is great. Easy install, fit my canon eos r10 perfectly

Comes with multiple screen protectors, it is sort of resistant and a little water resistant. I’m seeing a lot of micro scratches and finger prints but it does a good job for its price. It’s not obstructing in any way. Can see the screen like nothing was ever there. It stays on once you put it on. No bubbles. And fits perfect to the screen of my CANON EOS R50V. Worth the price Would Recommend

Fit perfectly on my canon r5 ii. I gave it four stars and not five as I thought the protector was too thick. But the build quality is great

Obviously, they protect the LCD screens, but they also make them look new and there's no loss of sensitivity to the touch screens. Applying them to the screen without creating a bubble can be a little tricky, but with a little pressure, the bubble will disappear. Extras screen protectors are provided, too. If a screen protector should happen to get scratched, which is unlikely, at least you'll have a spare (or two) to replace it. And, they're cheap. Just do it!

I always shoot through the viewfinder and normally only review pictures on my PC, but I still want my screen to be protected so I bought and installed a screen protector before I took my first picture (as I've done with previous cameras). This one was well rated and reasonably priced and so I went with it. So far, I'm well pleased with it.

It fit great . Went on very easily. Adhered securely. Fit my camera perfectly. It seems like a good product.

De display protection is makkelijk aan te brengen,en lijkt van goede kwaliteit. Zeer tevreden.

Easy to install and great protection

Impeccable

Package includes 2x main and 2x top screen protectors. Fits perfectly. Touch responsiveness did not change, great little package. A must have if you like to keep your gear mint.

These protectors are great, can’t even tell they’re on the camera. I don’t really need them as I look after my kit, but they give that extra peace of mind, just in case the unexpected happens. Not a great feel of money for that extra level of protection. Easy to install with all the supplies wipes etc. supplied with 2 sets, doubt I’ll need the other set, but… Yes! The pictures show them both installed on my Canon R5 Mk II 😊