Tahikem 4 Set Swivel Levelling Feet, M10 Height Adjuster Furniture Levellers Foot With T Nut Bolt, Table Leg Extenders, Screw In Bed Table Chair Self Levelers Legs (2" Base Dia 2" Thread Length Black)

Sturdy and well made. Recommended.

Easy to install on a garden bench.

Once you have a 13mm wood drill bit (which aren’t your usual drill bits found in kits, they are fairly easy to install and do the job

Very simple to both install and to adjust to level up a free standing cabinet to get level and stop it wobbling on an uneven floor, a quality product highly recommend it.

Good quality items

Haven’t hit my bench with a sledge hammer yet but these look like they’ll be up to it!

Quality of these feet is good, I added them to my garden table to raise it up and make it level. Good that you can adjust each of them with the screw to adjust the level.

I made a gun rest which I needed to be able to adjust the height which these worked a treat.You get 2 different pads to stick on the base, felt so they don't scratch whatever they are on or rubber for non slip, I opted for the rubber but would of preferred them to be a bit softer as they still moved around a bit

easy to install, sturdy, works perfect, shipping was early and intact.

Easy to install. I used a dowel drill guide to drill the holes just to make sure the holes were straight as the chair legs are slightly angled (3-5 degrees) off-centre.T-nuts were easy to hammer in and the threaded feet screwed in smoothly.Used a 1" forstner bit to bore 2mm so the t-nut would be flush with the bottom of each leg.Excellent angled leg levellers for uneven floors. Highly recommended, would buy again

Ordered these feet for a project and easy to install. Would recommend.

Pas deçu!Ses donc se que j'avais besoin même plus je le recommande

Leveled the legs and made the uneven floor not an issue.