Question 1

Not able to adjust the sensitivity, the alarm is always on. Any recommendations.

Accepted Answer

Yes I had the same problem. However as a electronic
Tech. I could make a a slight change in the circuit to 
Rectify that. However I could not submit the cure 
For other than personal use. 
Call the company that made it. They might just replace it.

Question 2

Can this be wired to turn on a bildge pump instead of the siren?

Accepted Answer

In a bilge application and underway, you would need two of these to trigger the pump to turn on and off when the water has not gotten deep enough to require the bilge pump to turn on.  I would put one low enough so that it stays submerged, signal lost if uncovered by water. Then when the higher sensor detected water a latching relay that is tripped would keep the pump running, use another relay for the pump, and when the lower sensor becomes uncovered the pump shuts off.  You need two of the devices, you can have more than one sensor, I have 6 on each devices monitoring area.

Question 3

Using on a bilge pump. issue is once the bilge was pumped out any slight amount of water kicks the pump on and immediately off. do i need delay relay?

Accepted Answer

Use a back flow preventer in the pump output hose to keep water returning to the bilge which then restarts the pump after the pumps first shuts off.

Question 4

Will this detect cat urine?  Cat will pee along a certain wall, want to hide 2 wires in the carpet edge, alarm scares cat and alert me

Accepted Answer

I would think that it would, I am using it for detecting spills in water stores that refill 5 gallon cooler bottles, and it works perfectly on the city water, however the Permeate, low TDS water has to have a really large contact area to trip the sensor.  The long wires version should work the best.  I even had to add some salt crystals near the sensor to get the product water to become conductive enough.  My recommendation is to buy it, use your wires to try it, if it doesn't work return it becuase you did not use their sensors.  Strip your wires and place them near each other and cover the whole length where the pee pools on the floor you need the liquid to conduct the signal.

ASIN	B08WWXK2P7
ASIN	B08WWXK2P7
Audible Noise	80 Decibels
Battery Description	c
Brand	Tokatuker
Color	White
Compatible Devices	Siren, Shut-off valve, Other devices with relay input
Customer Reviews	4.6 4.6 out of 5 stars (53)
Customer reviews	4.6 4.6 out of 5 stars (53)
Date First Available	5 March 2021
Item Dimensions L x W x H	8.2L x 8.2W x 3.2H centimeters
Item Weight	0.09 Kilograms
Manufacturer	Tokatuker
Manufacturer	Tokatuker
Mounting Type	Surface Mount
Number of Items	1
Number of Packs	1
Power Source	Corded Electric
Product Dimensions	8.2 x 5 x 3.2 cm; 91 g
Sensor Technology	Conductivity Sensor
Size	825032mm
UPC	750225419018
Voltage	15 Volts

12V DC Wired Water Detectors Water Leak Alarm Module Leakage Flood Sensor with 10A NC NO Relay Output Control, Turns Off Flood Source (White)

Details

Details

Description

Specifications

Common Questions