Armen Living Panda Dining Chair, Single, Black Faux Leather/Walnut

I ordered this one chair last week to try it out and insure we loved it bf buying a set for a new mid century style dining table we've ordered from an online furniture store. We've been looking for a set of chairs that look pretty, are comfortable, and have the mid century vibe. It came in today and arrived in a light foam cover, which protected the wood back of the already assembled seat, and the legs, which are metal and coated in metal paint that matches the back, so they coordinate w/the back, but are not tacky looking. They were boxed in a well sealed triangular box, which helped it not move around a lot in transit, I guess, since there is not a single blemish on the chair! In fact, I love this chair! It took me ten minutes to screw the separately boxed legs on and they are well tagged as either front or back legs. The holes are pre-drilled on the seat and match perfectly w/the legs. the tiny screw driver is included since you need one of those 6 sided drivers to assemble. Best of all, they are very, very comfortable! The seat is well padded and the faux leather is very soft. We've sat in it for about an hour and so far, it holds up to my 200# husband comfortably. So, I'm ordering three more today! As a side note, though, although these look sturdy and are very comfortable, the backs are NOT solid wood. The backs are plywood and stained a walnut brown, though it shows more reddish brown than dark brown. The staining is beautiful, though and it looks good quality. My table will be solid dark walnut, and since the trend is not matchy, matchy, I'm hoping they blend in w/o trying to match them to the table.. The price point is very affordable, much less than some of the same style chairs from the popular mid century modern furniture stores online and walk ins.; so these chairs may only hold up a few years, since they don't cost $500+/piece. But we only use our dining room a few times a year since we have a kitchen table we use daily. But I can always replace them a few years down the line if they don't last since the price is very reasonable. I'll submit photos when I get the others and my table.

Gorgeous chairs! Sturdy and easy to put together.

Loved these legs are metal with awood look

This chair was insanely easy to assemble, so I do appreciate that! However some of the hardware is slightly warped where the leather is attached underneath it, which caused the legs to attach unevenly. It does lean/wobble slightly. I’m sure there’s a DIY solution to this, but on a carpeted surface is it not noticeable. Overall I really love the look of this chair. It’s has a great mid-century modern look and is very comfortable. This is a decent value. Exactly what I needed for the office space in my bedroom. Ps, don’t mind the unfinished floor; we’re renovating!

We bought this chair to replace a more sculpted Humanscale desk chair. The advantage of this chair is that it has a completely flat bottom cushion which may be more comfortable for some people when sitting for longer periods of time. The chair has a walnut-colored veneer which has a high quality appearance even though the base wood is plywood. I recommend taking care not to bang the chair into hard surfaces or it will likely dent/chip the wood veneer. The fabric seat, back, and sides are light gray fabric with a good texture. The legs are metal with a wood-like finish and screw into the bottom of the seat with three screws each. The legs have plastic tips to prevent scratching the floor but I added a half-inch diameter furniture pad to each leg so that it slides easily on our hardwood floors. Overall, the chair looks much more expensive than it is and fits the mid-century style perfectly. ASSEMBLY NOTE: Some reviewers have complained that their chair rocked back and forth on the floor after assembly. It is important to note that there are two different size legs for the front and back --they are clearly marked on the base to show you where each is to be positioned. The legs look identical but they are not (they have different lengths/angles). My chair sits perfectly flat on the floor without any wobble and so I suspect that wobbly chairs were not assembled with the legs in the right position.

Looks great and was easy to assemble, but one leg comes loose no matter how many times you tighten it; I have to retighten it at least once a week.

I'm a 6' tall 210lb man. This chair is extremely sturdy and easy to assemble. It is a little wide which is PERFECT! I have slight wiggle room around me. The look is sleek and just as pictured. Love this chair!

I was worried about the legs being uneven from all the comments but mine were perfect! The chair is nice and sturdy. It’s comfortable. I'm using it as a desk chair and sitting on it for over an hour is okay. The color is nice, like someone else mentioned the legs are metal with a wood print. You can't tell unless you're close to it or holding it. Overall I am happy with my new desk chair.

Compré 8 sillas 4 se encuentran increíbles. Pero 3 de ellas se encuentran desniveladas de la pata derecha se siguieron la instrucciones pero no tuvieron solución, se mandó correo al proveedor y no se tuvo respuesta por lo que devolveré 3 sillas. Y aún me queda pendiente que me envíen una silla pendiente.

La silla no viene cuadrada de las patas y al armarla queda con un juego hay que calzarla

高級感あり、座り心地も良い 後ろ姿もデザインよかったです！ 重さあり、しっかりしています。 組み立ては、地面に置くより、 テーブルに乗せたほうがやりやすかったです

The legs are not wooden! They're metal with a wooden design finish. Also, one the chairs has un-level legs. I thought it may be my fault in assembly at first, so tried to reassemble the legs but no, didn't work.

本当は違う椅子が欲しかったのですが，納期未定となってしまったので、断念して探してました。 Amazonからのおススメ商品として届いたので、余り期待せず見た所(すみません)気に入ってすぐお取り寄せ！ 納期も早く、お値段なりの部分も勿論ありますが、座り心地も勿論期待以上でした。 バックのデザインがステキで、リビングから見えてもおとりません。 合皮なのでそれなりの感じはありますが、ダイニングチェアを気に入ったものを探しながら，一脚ずつ変えていきたいと思っているので、その一脚となり，自分用として座っています♪