Monoprice PLA Plus+ Premium 3D Filament - White - 1kg Spool, 1.75mm Thick | Biodegradable | Same Strength As Standard ABS | For All PLA Compatible Printers (115835)

Ive never realized how big of a difference the filament made until I used the black and white pla+. Ive been printing for about 5 years and generally don’t print intricate parts but I know my printer pretty well. A friend of mine recently wanted the viral slug from tiktok and I figured I’d print it as a gift. The yellow filament was a cheaper brand and I could not figure out why it kept failing. I started thinking that maybe, my printer isn’t tuned as tight as i thought it was. I then decided to swap to the pla+ just to see if I’d make a difference as the bottom layer had the biggest slopes so warping was more of an issue early on and it printed perfectly. I even swapped back to the yellow without issue since it was at a smaller slope and everything turned out flawlessly. Could not be more happier with this.

This is the recommended filament for my monoprice mini select 3D printer and it works great. No issues with jamming. I did have one issue with breakage, but the printer did sit idle for many weeks, and I should have removed the spool. Works great, low threading and good adhesion. I've purchased this same filament many times and had great success with it. Unfortunately it now seems to be out of stock or completely gone. That's bad because this is my go-to for printing sturdy parts. I have printed all of my GB props using the filament without layer separation or other issues.

This is my go to for PLA+ filament. strong layer adhesion as well as plate adhesion. Got this roll at a great price and will be buying more as I need it. The prints are a lot stronger then regular PLA.

This is my first experience with PLA+ and I'm really pleased with it. It flows smoothly and is not prone to jams. I have a Monoprice Maker Select printer and I print this at 215 centigrade with a heated bed at 60 centigrade. There are no issues with warping. The diameter is extremely consistent. PLA+ is biodegradable, which I like. Of course, it's PLA and has the same limitations. Don't leave it in a hot car or in direct sunlight. It's not suitable for printing things that will be in water or in a chronically wet environment. But it prints like butter and gives very fine detail. Note that this is a 1/2 kg spool rather than the usual 1 kg spool so it's more expensive than normal PLA.

This is by far the worst filament I have used to date! Like others here have stated, it bind up constantly, and causes the filament to not get fed properly to the extruder. It has happened on several prints now, and on smaller ones, I can usually monitor the spool and keep it feeding properly. But for lengthy prints where I can't monitor it regularly, it binds up and prevents a successful print! I've had it happen with other brands (usually off-brands) but nothing like this product does!

I’ve tried a few brands of wood filament and while all produce a lot of stringing, this one has been consistently the easiest to work with of the bunch. I run it at 180 degrees and it adheres nicely to my PEI beds, shows some but minor stringing and flows very consistently. It’s a light colored wood. My only nit is that it has a bit of a plastic-y look, unlike some other wood filaments.

I checked the Monoprice Website for their PLA Plus+ Premium Filament and they were OUT of Stock. I checked the Amazon Website and it was IN STOCK, so I placed a roll of Black PLA Plus+ Filament in my Cart. A few days later the Filament arrived and within 15 minutes it was loaded on my Ender-3 and printing a 9 hour print. For me PLA Plus+ always prints flawlessly on my Creality Ender-3 and my Monoprice Mini Delta... this is my 3rd roll of black * 5th roll overall (already used 2 rolls of White)- I really like the consistent filament diameter, consistent printing quality and in general the strength of the objects after printing. I'd Highly Recommend Monoprice's PLA Plus+ for anything that requires Strength and Print Durability.

Of the Monoprice PLA that I have bought, this is probably my favorite. For some reason the blue has a better sheen and finish than some of the others. I would buy this again, but have decided to move away from Monoprice filament. I don't know if all of their filament is sourced from the same supplier and not even sure if you buy the same filament again if it would be the same as what you had before. So I decided to go to a brand that is more focused on the filament market.

Fantastico, ottimo rapporto qualità prezzo, non metto 5 stelle solo perché voglio provare meglio il filo

No es verde pino, parece verde fosforito

Wer auf der Suche nach dem schlechtesten Filament ist, liegt mit diesem Produkt 100% richtig. Je weiter die Spule verbraucht wurde desto schlimmer wurde die Wicklung. Filament hat sich verklemmt und konnte nicht mehr gefördert werden "Metal extruder" die Spule wurde sogar von der Halterung gerissen. 80% der drücke sind gescheitert ab in den Müll damit so ein Dreck soviel Zeit für nichts. Mit anderem Filament laufen alle Drucker sauber mit diesem Dreck nicht

alla ricerca di pla economico mi sono imbattuto nel marchio monoprice aspettandomi stampe mediocri e difficoltose, ed invece sono stato piacevolmente stupito dalla facilità di adesione e la uniformità delle superfici, fatta subito una piccola scorta di colori finché si trova a questi prezzi.

alla ricerca di pla economico mi sono imbattuto nel marchio monoprice aspettandomi stampe mediocri e difficoltose, ed invece sono stato piacevolmente stupito dalla facilità di adesione e la uniformità delle superfici, fatta subito una piccola scorta di colori finché si trova a questi prezzi.