BAILONGJU Easy Installation Car Door LED Logo Projector Ghost Shadow Lights for Nissan Altima Armada Maxima Titan Quest

Everything you need to know about the BAILONGJU Easy Installation Car Door LED Logo Projector Ghost Shadow Lights for Nissan Altima Armada Maxima Titan Quest1. If you receive the package and the all the parts are loose, don’t fret. There are only four parts and they are easily put together. You will have the clear lens cover, a metal LED housing, a small white o ring (that fits inside the metal LED housing) and finally the black lens.2. To remove your original door light, simply pry off gently with a small flat head screw driver. Release the wiring harness by pressing down on the plastic release tab and then pull the harness off the light fixture.3. If you need to assemble the new Shadow Light, be sure the white o ring is placed into the metal LED housing. Look at the black lens. It is tapered on one end and has a small tab on one side. Put the tapered end facing down into the opening on the clear lens cover. Notice on one end of the clear lens cover a clear rectangle insert. This is where the two small needle looking wires will fit. The tab on the black lens needs to face the opposite direction of the wires. This is important because the Nissan logo will be oriented in the correct position to be readable when you exit your car. If you want the logo to be upside down when you exit your car then put the lens with tab facing the wires. It is a good idea to plug the LED into the wire harness to make sure it works before going to the next step.4. Once you have removed your original light and assembled the new one, all that is left to do is plug the new light into the wiring harness. This can be tricky because the small needle like wires do not always line up with the holes in the wire harness. You may have to gently bend the needle like wires to align with the wire harness. This may take several attempts. Be sure you do not use any metal screw driver or other metal tools to adjust the wires if they are making any contact with the wire harness. You could short out the LED. Adjustments should be made before connecting to the wire harness. Once you make a good connection and the logo is oriented to your liking simply pop the light back into the bracket and you are done.5. Okay you have your new lights and they work and they look pretty good. This is what I have noticed. On my front doors where the light fits, the rubber gasket (water seal) on the door blocks a very tiny portion of the logo so the image is not complete. It cuts off a very tiny portion of the outer circle on the Nissan logo I noticed there is a small amount of play in the clear lens cover and I was able to move it slightly and now the entire logo is visible and the lens cover seems to be snug in place. This is not an issue on the back doors. The logo is perfectly projected. Several people have complained about having to modify the lens or the lens housing to make the light fit in their door. Mine fit perfectly. If they had not fit I would have sent them back because I am not going to mess up my car for something that does not fit properly. The last thing I have noticed is there is a slight color difference in the logos when I see them on the ground. Two seem to be a little darker and the other two seem to be slightly lighter or faded in color. I don't know if the LED’s are the culprit or could it be the actual Nissan logo lens or disc inside the black lens housing. The black lens housing has a small projection on one side. This opens up to reveal the Nissan logo disc. It simply pulls out like a small drawer. If you open it be careful not to lose the disc or change the orientation which will result in the logo being projected at a different angle.6. Bottom line, you get what you pay for. I like the product. They are fairly inexpensive, relatively easy to install with no drilling or extra wiring and they actually look pretty nice. Don’t throw out your original lights. You may need them again. (I hope not). I would give this product three stars because there is room for improvement and I can’t help but wonder about the longevity of the LED’s but I am giving them FIVE STARS BECAUSE THEIR CUSTOMER SERVICE IS EXCELLENT. I received a defective LED and they responded to my complaint and I had a new one in 48 hours. What more can I say? Buy a set; they are so much easier to deal with than the costly ones that have to be installed by drilling holes and adding wires.Update:I moved the lights around to see if the color difference in the projected logo was different in another door. While doing this the doors were open and the lights were on for a few minutes and I noticed the metal housing that holds the LED was very hot. I have no Idea if this is normal for a LED light. I know the incandescent light bulb originally in the car got very hot..Update #2:I have had these for over 1 year and 2 months. They still work perfectly. Apparently I have an older version of this light. Mine do not turn off after a few minutes. They will stay on for a full 20 minutes at which time my cars electrical sensor kicks in and turns off any lights left on. Mine were not marked left or right. They are all the same for all 4 doors.

Very nice item. High quality and seller stands behind the product. Recommended if you are looking for these lights. They fit 2016-18 Maxima fine, there is a humped area of the plastic on the actual vehicle door that you need to remove or dremel down if you want them to fit perfect. It's because the laser is in that same area. They do fit OK without doing this though, just the bottom seam isn't completely flush. Not a fault of the design of this light, just a variation in the door on the Maxima. Still worth getting for the quality of the item and wonderful seller.

These replacement lamp & lens units are just awesome. Engineered as direct plug-in replacements for the OEM units, they don’t require any tools to install. Just unplug the wiring harness from the stock unit and it plugs directly in. These replacements are individually marked “L” and “R” so there is no confusion. The beam is plenty bright and looks great. Adds a real touch of class to the car. Priced very well, they are worth it. I just installed them today, so I can’t speak for longevity or difficulty in bulb replacement, but so far I like them a lot.

Easy installation as advertised! These can be installed in less than 10 minutes! Very easy swap with the factory door lights. The logo looks sharp, and I will update my review down the road, to provide an update regarding durability. These were installed on a 2011 Nissan Altima.

Exactly fit! The connector snapped right on and the lens fit in the door perfectly. The logo is very clear and sharp. It also has a second LED that is projecting horizontally into the inside of the car. If you leave the door open, the logo will eventually time out and turn off leaving only the other courtesy LED.

installed this setup on a 2016 Nissan Maxima, easy to do and looks great... thank you.

I love the light but can only give 3 stars because the second light didn’t fit into my passenger door properly. The picture is from my drivers side. I also had to go into the projector and change the orientation of the Nissan symbol so that it was able to be read properly. But this is the best bang for your buck. I would buy again to add to the back doors

The Nissan logos do look cool at night , always getting compliments . Needs some slight modifications on the door side ( two small notches) to fit right . I used a metal saw blade and carefully trimmed it ( make sure you don't cut any of the wires around the opening. Installed it on a Nissan Armada, and it took about 15 minutes .Highly recommended.