TransOurDream Tru-Waterslide Decal Paper Clear 2.0 A4 10 Sheets Printable Water Transfer Paper for Inkjet & Laser Printers,Water Slide Decals Transparent for Mugs,Tumblers, Candles，DIY Glasses

I was very hesitant to get this because I wouldn't be sure it worked well but thank god I did! I made designs for my brother's wedding and built a small tattoo station. Everyone loved it! It was very easy to use, I actually printed it at a shop instead of at home, just in case. Just make sure you print using a straight-through paper path type of printer, otherwise the special paper folds and it could mess up the transfer. Also cut as close as possible to the design, because once transfered on the skin, the areas with no design are very obvious and actually wrinkle up the design if it's in a spot with a lot of movement (like hands)

I bought this waterslide decal paper for some crafting ideas and I’m genuinely impressed with the results. It works amazingly well with my inkjet printer — the images came out clear, sharp, and beautifully bright, with no bleeding or dullness at all. The paper itself is easy to handle and very straightforward to use, even if you’re new to waterslide decals. Once applied, the decals transferred smoothly and gave a great, professional-looking finish. The clarity of the final result really exceeded my expectations, especially for detailed designs. Overall, this is an excellent quality product that does exactly what it promises. I’d highly recommend it to anyone doing crafts, custom mugs, tumblers, or decorative projects. I’ll definitely be buying it again.

Doesn’t always work on laser printers. One out of 3 prints don’t stick on half of the transfer sheets. You have to deal if with plenty of clear acrylic spray paint, I used 1 thin leave it to dry and then a thick layer. Too thick first laser gets the toner running. It kind of works but I am going to look for something more reliable, too many variables yo take care of.

Purchased to make custom decals for Warhammer miniatures. Make sure to follow the instructions, and apply several thin coats of something like polyurethane varnish over the top to fix the print. I used a Laser printer. Works exactly as expected and very happy with the result. This doesn’t work like normal decals and only takes seconds to separate from the backing paper. Be sure to print out lots of spares as it took several attempts to get the hang of it. No decal softener needed.

Have used this form of decal paper for some time and all was well. However this batch seems to have a fault in that when I try to apply decal to base subject they will not stick, they just roll up.....Most disappointing. As always could apply for refund and return, but since I have used most of pack "testing", not worth effort to return. Would rather supplier tries to source fault

Useless! The first sheet I used, I printed on my inkjet and left a long while to dry. I didn’t have an acrylic spray so used a sponge brush to ‘paint the sealer’ instead. I only applied a small amount but all of the images ‘cracked’ immediately. I couldn’t use any of them. 99p of resources wasted. I thought this might be due to not using an acrylic spray so then spent £17 on one. Today, I printed and left for several hours to dry. When I used the spray as per the instructions on both products, the ink on the images ran. Out of over 20 images, I have 4 which are just about useable. Having spent so much, I would not, under any circumstances, recommend this product!

Superb! Bought these a few times and have created numerous decals which still look excellent. Highly recommended!

Never having done this I was a little wary, especially with some reviews saying not to bother. But, I went for it. I made sure to fully coat the printout with Clear Coat, with over half a dozen coats. Some of the transfers looked a little plastic but the use of Micro-sol and Mircro-set helps with that. There were only one failure and two close calls from a full sheet of A4 decals. One disintegrated but it was a tiny decal with tiny writing so I was pushing it. The other two were splits but that was more my being too over confident after a while and they did go back together well. I will be using this again and making more of my own decals now. As long you make sure to completely cover the printout with clear coat, well, and leave it to harden/cure long enough, I don't see any reason anyone should struggle with this.

Perfecto y recomendableee

Lo único, una vez impresas, barnizar el papel de calca para que no se "corra" la tinta cuando colocas la calca sobre la superficie

Perfect

Se despega muy bien y no se corre

Sirve para madera, solo hay que respetar horas de secado del barniz ( no viene incluido). Contenta con el resultado.