A-Premium Cruise Control Switch Assembly Multifunction Switch

Easy to install and it works great!

Feels and works like original. Installed in 15 minutes.

Works great! Installed easily! No problems.

Exact perfect fit. Easy install. Hardest part of the install was the YouTube video. The removal of the steering wheel airbag was not as easy as the video tutorial. Replacing the airbag T25 bolt/screws was trial and error. Took me an hour. Resulting in extremely pleased that I purchased this item. Highly recommend this item operation for anyone who is slightly handy with hand tools. I saved over $200. based on what the local Toyota “Stealership” wanted to charge me. And I didn’t have to make an appointment or drop off my Tacoma for the day.

Works great

I installed it in my 2004 Sequoia in under 10 minutes. Remove the negative battery cable so the air bags are disabled. Remove the screw under the steering column, then the two screws facing you, you have to turn the wheel to reach each one separately. Pop the two pieces of plastic off, then use a thin flat tool to remove two more plastic covers, one on each side, to expose the two torx screws securing the center air bag, I think it’s a T25 bit. Loosen them all the way, they will not fall out. Pull the airbag bag assembly out, pull off the ground wire connector, use the thin flat tool to pop the yellow square lock up on the wire harness, then pull the wiring harness out. Place the airbag assembly right side up, and out of the way. Remove the two screws holding the cruise control assembly, remove the switch, and disconnect the wire plug by pushing the tab in. Install the new switch, and assemble in reverse. It worked, not sure of longevity, yet at $20, compared to $150 for an OEM, I can always buy another one down the road. I did not have any dash lights going off, just that the cruise control worked intermittently for a couple of years, until it stopped working altogether.

One star because the quality is alright not as sturdy but as close to oem as possible downside it only work on certain Toyota cars or trucks, suvs or vans, unfortunately it did fit my tundra but the functionality was never there but nice little prop to fill in the whole on the steering wheel buy at your own risk, it might work or it might be a prop for you as well.

Works good. Build quality is ok. Been using regularly for a year and you can tell it isn’t going to last another year but for the money and how easy it was to install, I’d buy another

Compre este kit de control crucero para un corolla base 2016, funciona correctamente.

facile à installer et fonctionne vraiment bien

if you have a 2009 toyota corolla ce manual read this review. my corolla didnt come with a cruise control and i assumed manual cars didnt have them until one day i stumbled upon a video talking about adding it. So i looked around and i was pretty close to pulling the trigger on a rosa cruise control kit but that was $300 and this was $25. so i was like what the heck, if it doesnt work ill return it. It was such a simple install, remove negative terminal on the battery -> remove the 2 covers on the sides, use t30 bit to unscrew the airbag. only issue i ran into was having to cut the horn wire out of the existing socket and putting it into the socket that comes with this, I did that but unfortunately when putting the airbag on i broke the horn wire connection (simlpe fix) but still that sucked. Other than that it works like a charm.

Se ve de calidad aceptable pero después de unos 15 días vuelva a fallar en control.

Remplacer le bras de régulateur de vitesse de ma lexus is250 2006. ( j’étais incapable de mettre le régulateur de vitesse en fonction depuis quelques temps) Fonctionne parfaitement. Il y a des instructions sur le web pour comment remplacer. Assurez-vous d’avoir un embout de tournevis de type torq. En espérant qu’il durera longtemps, mais pour près du 1/10 du prix d’un neuf d’origine, je ne serais pas fâché s’il fait seulement la moitié du temps de celui d’origine!