DROK Class AB Amplifier, 2.1 Channel 80W+80W Stereo and120W Pure Bass 9-18V 4Ω Audio Amplifier Board

I bought this since it's 2.1 output and importantly class AB. I just wanted to hear class AB over a little D amp I've been using for a while. Sounds nice and I think I can hear the warmness vs D! But aside from that, some important things to note and observations from other reviews. It'll play with as little as 9v and up to 18.9v. As soon as it gets 19v it cuts off output to the speakers. I don't know how accurate my little Ali adapter is with actual voltage, but the number 18.9 is the most it will take and play. So unfortunately, a typical laptop 19.5v adapter you've got won't work here (I tried), but at least it won't blow it up outright. Also output wattage is good, I have a mix of 4 and 8 ohm speakers that work well. I suspect the max power rating of 80x2 and 120w sub is only if you are driving 2 ohm speakers as stated it can do in the specs, which the other reviews complaining about output haven't mentioned what they are using. Edit: From the ST datasheet for the TDA7850 chip: ■ High output power capability: – 4 x 50 W/4  max. – 4 x 30 W/4  @ 14.4 V, 1 kHz, 10 % – 4 x 80 W/2  max. – 4 x 55 W/2  @ 14.4V, 1 kHz, 10 % So try testing 2ohm speaker at 18-19v and lots of current if needing to hit the max.

This is a really nice amplifier board, and I've tried a few. This review specifically pertains to the model being listed here, "Class AB Amplifier, DROK 2.1 Channel 80W+80W Stereo and120W Pure Bass 9-18V 4Ω Audio Amplifier Board". Some of the older reviews appear to be talking about a totally different product. This one does not have bluetooth. Honestly the sound quality from this thing is outstanding, it's clean and loud and music sounds fantastic. K have it hooked up to an ATX power supply that I use for my car audio equipment at home, pushing 12v through a fused distribution block. The input is a 3.5mm aux connection to my Galaxy S22 USB-C out, converted through an in-line DAC. Upon initial turn-on, a nice green LED lit up,and there is no noise whatsoever coming out of my 6.5 inch coax speakers. No buzz,no fuzz, no hiss, and no piss. A beautiful thing go experience if you've been let down by some of these mini amplifier boards previously like i have. I also hooked up the subwoofer output to my 10 inch sealed Infinity REF sub at 2 ohms. The balance is unbelievable! There's only one volume control know, so there is no way to modulate the sub or speakers independently, they're just mixed on the board, but the mix is super nice and balanced. Overall I'm super happy with this amp. It aounds better than other amps that cost multiples of what this one cost me ($23). I recommend it without reservation, just make sure you know what you're doing and have the 12v equipment needed for running this in your setup. Kinda wish it had bluetooth but I knew it wouldn't going into it so that's not an actual knock on the product. Just a wish. Good luck and enjoy. This thing puts out loud clean clear audio signals for your speakers!!

It's not 80x2 +120 sub out... Won't even pull 80 watts off a power supply. Sounds good but far less power than claimed. We've got maybe 20x2 +40 on the sub out. 1/4 of the advertised claim. Can't anybody advertise honestly?

Sounds decent, has good output but will hum quite a bit if the volume is at max with nothing playing. I gave four stars because that may be a wiring issue on my part, but otherwise it seems decently made, not top of the line obviously but it does exactly as expected and is actually quite a little contender if you add a cooling fan, stays nice and cold that way but without one it gets a bit hot at 75% volume on 4ohm speakers.

I ordered 2 of these, 1 spare, to replace 2 Class-D digital amplifiers. The Class-D amps had very poor bass response and and sounded too bright on the mids and highs. It also required a 24 volt supply, which meat a separate 12V regulator for the VU meter circuit. This item took their places with no changes to the preamp at all (the preamp was tested separately for frequency response after I noticed the lack of bass). The change in the sound was night and day, with the full spectrum being reproduced. This is on good quality KLH speakers and connected to the line out on my computer. The bass is deep and tight. the bass drums have punch, yet the foot pedal notes from an organ are there also. I highly recommend this amp!

5 stars for the price alone! No, like ALL cheap amps overseas, ratings are inflated. Use efficient drivers, GOOD power supply, and a quality source. I built a SQ boombox with a JBL fuse sub, scattered drivers from pulls from TVs, etc. and it ROCKS! I built another system with one of these amps in my dog bike trailer with the other half of the fuse, speakers from an old cisco telepresence, and stud mount cam battery, and WHOLLY SH…! Perfect for an audio nerd building a cheap quality boombox/system. Just be mindful of power supply quality, groundloops and EMI, etc, use a quality BT receiver if going that route, lots of those can be noisy.

A good sounding stereo amp however there is virtually no bass audio output and where they get the power rating is beyond me. It seems like 5-10 watt output not the 120 which they claim.

Warm and true audio out of this one!!! The sound is the true nature of an AB class amp! This tops other board amps of this size by far! Most people’s opinion on what classifies a good amp is just how loud it gets or how much bass u can get out of it. With this one I only cared about the tone and fidelity for mixing without any colouring of the sound and it does this perfectly. I did get the 2.1 channel one but haven’t connected any sub. It gets plenty loud enough for anything I’d need it for without distortion. The caps did come banged up on the top and I wasn’t too happy about that but it still works and I even purchased spare caps to swap them if needs be. I highly recommend this one if your priority is pure sound quality

Don't expect much with all the positive reviews...you need to have good quality speakers and it can't pull 80w speakers also...as someone mentioned.... False marketing specs... Quality will be good with good dac and pre amp ...Ideal for 30w-40w speakers and 50 w subwoofer... Don't expect punchy bass .. for this price range it was a good one...I am using 18v 20A power supply.

This thing slaps, its great at 2 ohms at 80w rms but it does get really hot so add a fan or bigger heatsink. Also it is NOT bridged at the subwoofer output, it is only one channel and other 2 for mids, 3rd one is left unconnected. Im not sure why the left the 3rd channel unused, theres no traces going to it at all. It would have been better to have dual sub outputs to run 2 subs instead. The sound is also really good and it outputs full range and lowpass

So good I got two of them for my amplification project

Pleased with this amp. I’d say it’s very good for its size and quite powerful.

Do not buy this... Its such a bad experience to me, sounds shows may be 15 to 20 per channel only. Please don't buy