Muzata 6Pack 3.3FT/1M LED Channel Aluminum U Shape Silver LED Strip Diffuser Channel with Milky White Cover Easy Installation U1SW WW 1M

Used along with LED COB lighting strips to add under cabinet lighting in our kitchen. Needed to do for a long time and finally had the time and courage to tackle it. We were nervous at first with doing our own DIY setup instead but it seems that the options have come A LONG way in the past decade. Hubby watched a Youtube video of someone doing similar project and it seemed easy enough. Definitely more complicated than getting the pre-made kits, which I'm sure work great but were more expensive and less customizable.... Anyway, back to these tracks, hubby said he was surprised with how easy they cut - he even was able to use compound miter saw with normal blade he uses for woodworking. He attached the dampener to it prior to cutting to avoid having to cut the plastic dampener and the metal track separately. Used painters tape and cut slowly and it worked great - no issues with that. He also used the provided clips to attach the tracks to the cabinets. BE CAREFUL or you could go through the underside. He pre-drilled to just the right depth and had no issues with the install - no screws stripped or tore through the cabinet. You could (as others have recommended) use some double sided adhesive tape but he liked the idea of being able to remove easily in case the lights need repairing down the road - soldering upside down is NOOO FUN =) His only 'complaint' was that the little end caps that come with the system wouldn't work with our setup. Half of the caps come with a small (maybe 1/8 inch) hole to feed wires through and the other half are closed off. He had to drill larger holes due to using 18 gauge wires for a longer run and didn't want the possibility of voltage drop. We only needed 1 end piece after connecting all 6 of our lighting bays together. Definitely an 'our situation' problem and nothing against the product. They'd be great as-is if you're doing 6 separate bays and not connecting them.

The tiny screws are provided but I had to use plastic anchors to attach to drywall. I used three mounts for the three strips I installed. Now I realize that there are only enough screws in the package for two mounts per strip. Overall, it's a great product, well made. I want to try the taller version next. Current project I placed these inside a bedroom closet to turn on with a blade switch when the door opens. I'm now thinking where else can I place more of these strips for fun led lighting. I do not have the plastic covers installed in this picture but you get the idea.

I used these for a kitchen project to run led strips as under-cabinet lighting. Generally speaking, the installation of these is pretty simple, mount the clips to your surface and snap the track into place. Mounting them under a cabinet posed it's own challenges but once done the installation was clean, and I'm very happy with the results. The clips hold the track solidly under the cabinet and the channel is low profile enough that it's almost unnoticeable under the cabinet. The channel and diffuser will offer solid protection from the kitchen elements, which is important as this particular light was going over the stove and cabinets next to the stove. The diffuser was a bit of a challenge to install as it fits very tight within the channel. Once you figure out the trick it goes in OK, getting it started was a bit tricky, especially trying to work upside down under a cabinet. They're also a bit stingy with the clips. My kit only came with enough clips to do 2 per section which didn't feel like enough to me. So I ended up using all 12 provided clips on 4 sections of channel. A few extra clips in the bag would be nice. But in the end it worked out. I did install a single 30" section and ended up just drilling a couple of holes and using small wood screws to mount it, which also worked fine. Overall I'm satisfied. The quality seems good enough, and the fit and finish of the end result is very unobtrusive. The diffuser doesn't impact the brightness of the LEDs any noticeable amount, and the lights look great in that area.

easy to work with and does exactly what we needed - prevents glare from under cabinet LED lighting. We even ran it under the over-the-stove microwave because that light is lame and it is great! Expected a lot more trouble by all the reviews saying it was difficult to snap the diffuser in, but that was not our experience.

Very good quality, especially for the price. Looks great and is easy to install. Will not completely hide the hot spots but will dull them to about half way, which was enough in my case. I was slightly worried reading the reviews about some difficulty pushing the diffuser into the metal bar but had no issues whatsoever. I assume people are having hard time if they don't align the diffuser properly or they push in one side at a time instead of snapping in both edges simultaneously, from one end to the other. Fairly easy to cut with some basic tools but make sure to smooth the edges as they get very sharp after cutting.

Does nothing to hide LED dots. Absolutely do not buy this product.

This is the worst defuser, you can clearly see the led dots. I don’t recommend

These are really nice, I didn't use the diffusers, but they do snap in easily. Make the installation look clean and professional.

As usual superior quality.

Overall very happy with the product. Aluminum is well formed, easy to cut with a hack saw.. the end covers fit so so/ hit and miss if they are snug or loose. But not a deal breaker.. The plastic lens snaps on without an issue. Squeeze one end to get it started then push it right in.. The cover diffuses the LEDs but its better suited for more of a reflective then direct application, directly looking at the diffuser you will still see the LED shapes but when looking at the cast lighting on the surface it looks great, even when two inches away from a wall. (I used mine to do some back lighting of a mirror) Wish I had these when i was doing my under cabinet LED lighting. Overall happy with the product and the value.