XGIMI Projector Floor Stand, Projector Tripod Support Horizon/Horizon Pro/Halo/Halo Plus/MoGo Pro/MoGo Pro Plus/Elfin, Not for HORIZON Ulta, 360° Free Rotation, 19 or 35 inches Height Adjustable

This projector stand is great it works with basically any projectorit’s very strong very sturdy very nice very clean look and has a little clip for the cablesI got it free with the Xgimi laser Home Theater projector and that’s where there’s an issuenow when I use this projector stand with my Xgimi Elfin there’s no problem at allBut with the bigger laser projector I just picked up, which is much more bulkier much meatier… well it has a power brick that is really huge, and I understand that this makes the projector less heavy, I get it, but this power brick is so heavy that it can actually damage the projectors power jackthe fact that the power is not plugged in with a right angle plug, doesn’t help eitherBut whenever I have to move the projector or even adjust it, it gets affected. You see, whenever I have to move the stand that’s a projectors on, invariably, even if I move it more than 6 inches in any direction the power brick starts to pull and yank on the projector power jack and can fall off of the stand if you move it, which is no good with a $2K 4K Laser projector.now there are a number of ways they could fix thisThey could add more length to the power bricks cable from the brick to the actual projector, and or they could put a bracket on the projector stand which will receive the unwieldy power brick from the large black Xgimi projector it’s meant to be used with.They could also put a right angle at the end of the power plug so that way when it plugged into the projector it can not only fasten better to the projector but there could be a little bracket that does the cable swags onto for a cable strain relief these things are really easy to modify or fix when designing the product but when the product is so sleek and sexy after it comes out of the factory there’s not much you can do besides deal with itBut besides that everything is awesome

Nice and it fits but too expensive. Nothing special about it. Mark up must be gargantuan.

UPDATE:Have been using second unit for about three weeks.Company replaced original unit in a timely manner, no fuzz. Kudos there!The base on this unit is lot more sturdy as it sits level with the ground. The first Unit I received did not. The adjustable part seems to hold it's position better, but the adjustment knob is just too close to projector and makes tightening and loosening the knob awkward. It has really nice quality materials and great height for projector. Unfortunately the it is not easy to attach the projector, or to take it off the stand. Doing so requires you to spin the projector many times, risking touching the lens or dropping the projector.Raising from three stars to four!*****Original Review:I have been using for about three weeks.Pros: It is a good height for projecting on wall. Easy install. Nice finish. Adjustable part makes it nice to project at an angle.Cons: Material below base is not flat, it makes base easy to wobble, not safe for expensive projector. It is not easy to take the projector on and off. I have tried to put projector on last, and adjustable part of base on projector first, then then put both projector and adjustable base on pole. In both cases you have to spin the projector about ten times before it is secure, risking touching the lens, which is not protected and you are not supposed to wipe. Cleaning instructions say to blow air only. Worst of all the locking mechanism on the adjustable part appears to be locked, but if you move the projector, a lot of times it will get free and the projector will suddenly drop to lowest position. Does not seem to be a good design.

works well with the projector--but a little expensive

It's sturdy and fit well

Perfect stand for the XGIMI 4K Horizon Pro Projector. It is sturdy and well made. When I got it, they were having a special and included the stand with the projector. No complaints. Excellent value for the money.

it's hard to adjust, the knob to regulate the tightness is flimsy. would not buy if I had the chance

First, It doesn't have proper height, so you always need to keep it on the side instead of the back. This makes the projecting picture bad.Second, it always goes/tilts down, so not able to keep the screen top to the wall. Better stay away