4K Dash Cam Adapts for Audi 2019-2026 A4 A6 Allroad A3 A5 Q5 S4 S6 Q7 A8 Q8 S8 TT A7 S5 Q3 e-tron (Model A), OEM Look, Loop Recording, 2160P UHD Video, WiFi & APP, Parking Mode, 64GB Card

I was skeptical after reading reviews. I did not think that it was going to work but figured for $170 it was worth a try. I'm so glad I purchased this. It was tough installing and getting the trim to fit BUT it does fit and it looks great. The set up was easy, app is great, video quality is excellent. The instructions were very clear on what wire goes where. I knew which wire it was. I would definitely recommend and I'm happy I bought this. I did upgrade the micro sd card to 256 GB. It comes with 64GB.

Vehicle : 2025 Audi A6 Allroad. Installation: Not the easiest of installs, no fault of the product. Patience is key, as is getting yourself a decent set of soft pry tools. The final piece to remove was impossible, this is the piece that is replaced by the camera. The video shows it simply sliding down, this was not the case for me. I searched around and found another installation video where the mirror is removed by twisting it off, this was the solution for me. Once the mirror was off I had a bit more space to tilt the piece forward and then down. Putting everything back together took a few attempts, take your time routing the cables. Everything will snap together tight and clean if the cables are in the right spot. If you have gaps, don't try to force it, remove, re-route cables and then try snapping the pieces together until it's perfect - I had an extra set of hands helping me during this stage. It's primarily the middle trim piece that was difficult, i routed the cable in toward the middle, between the two snaps. The final trim piece gave me a bit of trouble until I realized one of the snaps had been slightly bent during removal, after straightening it out it clicked in easily. Total install took me a couple of hours, mainly because I forced myself to walk away, clear my head and re-group. Configuration: If you're having trouble connecting to the camera, make sure you disconnect from CarPlay. In my setup, this meant turning off bluetooth and re-enabling WiFi on my iPhone. Misc: I purchased an additional 256gb Extreme SD card and the polarized lens. The lens makes a huge difference in clarity, especially at night and in bright sunlight - the reflection of the dash in the windshield completely disappears.

Removing the existing plastic pieces is impossible with the single plastic trim removal tool included in the box. After spending somthing like three hours trying to remove the third and last part, I got a $20 plastic tool kit from the local autoparts store and removed that last piece in 2 minutes. Rest of the install was OK, but it does require some dexterity. Also, the WiFi ID the units uses to link to the phone app is... bizarre? I would never have guessed which one it was (even if listed in the phone's Settings screen) it until I found a piece of paper in the box that listed it, as well as the rather trivial password. Armed with that, App works O.K. Color is not the best but useable. Also, make sure you clean the inside of the windshield for a good bit around the lens - it is such a wide angle lens that you can see smudges as far as 5 inches away (I guess it is a good thing - also, the image is not too deformed for such a wide angle coverage). Default "take" length on 1 min is too short IMHO - I set it to 5 minutes.

Installed in my wife's Q5 - as others have noted the install is frustrating, but actually not quite as bad as I feared. Anyway, got it installed, got the app, powered right on, found the wifi signal with my iphone, and it connected right up. Good picture, app had good features. I changed the wifi name and password, and then called my wife out all excited to show her that it was working. She too got the app, found the wi-fi signal (with the new wifi name), connected right up, and as she was looking at the images, it disconnected. No wifi signal, no power light on the bottom, resetting does nothing. I think it died (or it blew a circuit breaker but then everything else near the rear view mirror/rain sensor/surround cam still works). I'm completely dumbfounded. It lasted for 10 minutes. I've seen bad products but this takes the cake. Even if it was faulty and the company responds (which I don't expect), the thought of trying to uninstall it and then reinstall it with the impossible to disconnect wiring harness, is a nonstarter. I guess I just drive around with a dead, $169 dash cam in the car. A really, really unbelievable piece of garbage.

As stated by many, installation can be a pain because of how tight the OEM cover is. Once that is out of the way, installing the cam and connecting the pigtail is a breeze. Three complaints I have (could be easily updated via firmware) - The blue 'recording' light is very annoying and distracting at night and cannot be turned off or dimmed. - There is no clear way to save video footage; when you press the snapshot button, it just saves a still picture (there is no audio confirmation). - Connecting to the camera is impossible if you use Apple CarPlay wirelessly. I hope the manufacturer can correct these in a firmware update; this is a solid dashcam overall.

I bought the Fitcamx 4K Dash Cam specifically for my Audi RS Q8 because I wanted something clean and factory-looking instead of a bulky windshield-mounted camera. This was exactly what I was hoping for. Installation was surprisingly simple. It fit perfectly into the existing housing near the mirror and looked completely OEM once installed. No messy wires hanging down and no complicated routing, which is a huge plus on a vehicle like the RS Q8 where you don’t want to ruin the interior aesthetic. Video quality is excellent in both day and night driving. The 4K footage is clear, license plates are readable, and the app connection works smoothly for reviewing clips. It powers on automatically with the car and has been very reliable with no glitches or connection issues so far. What I like most is that it blends in so well you almost forget it’s there, while still giving you the protection of a high-quality dash cam. If you drive an Audi (especially RS models) and want a clean, factory-style solution that installs easily and works consistently, this is a fantastic choice

I installed this in my 2024 Q8 etron. it is excellent and it truly looks factory. Install is not as bad as some people have reviewed. I'm pretty experienced with car installs and removing trim etc. If you have experience or are mechanically inclined it's pretty simple. If you're not, it's going to be difficult. Install took me about an hour. Disassembly is easy. I went from back to front. Large part just pops off. Go for the seam on the middle two parts and it will separate easily. Last part (one that gets replaced) should be spread apart at the top (two spudgers work well on either side) and then pull it straight down towards dash. Assembly is pretty straightforward. Cable from camera gets in the way so there is some fiddling around to be done. Camera part inserts straight up. If you don't get a positive click cable is in the way. Neoprene gasket on top should contact windshield. Center trim piece is trickiest here and I found if the cable goes behind clips towards windshield it is the easiest. Parts interface well and excessive force should not be required. If you feel yourself really having to force things together something is off - likely the cable in the way. Just fiddle it around and you'll eventually get it. Final large trim piece is simple. I would test camera before fully assembling. Pairing with wifi also reasonably easy if you are familiar with the process in general. Here's the rub. If your car uses wireless CarPlay etc it's going to try to kick you off the camera's wifi every 30 seconds or so. You need to select the Audi MMI wifi in the settings (iPhone) and deselect auto connect. This will allow you to check camera and configure it correctly - you can reselect auto connect when you are done. You're going to need to do this whenever you access camera via wifi. This means that wireless CarPlay and this camera don't really play nice together. If you anticipate viewing the dash cam on your phone while driving around you are going to need to stay disconnected from cars wifi services. You could do this by using wired CarPlay I guess but who wants to do that? I will just use it as a discrete camera and pull the card if there is ever a need to retain footage. Image is good and it looks great - truly almost factory. You can see a little bit poking beneath mirror from drivers perspective but not bad at all. Overall the best option for a factory look dash cam for your Audi.

The concept of having a hidden dashcam that blends in with the OEM look is great, the execution here is very poor. Bought this for my 19 Audi A4 which is pretty easy to install. The wiring harness is way too short on the connector side. You have to bunch them up so tight to even get them to fit it bends the wires at a very poor angle. The quality of the fitment of the plastic housing is mediocre at best, but the biggest complaint here is that the video quality is pretty bad. Claims to be 4k but it is very grainy and has a very low framerate. The app is also pretty mediocre. It's ashame the instructions are not clearer to explain wire routing because I struggled for 15 minutes trying to figure out how to route the wire coming off the camera through the plastic housing where it would not be pinched, and it still pinches pretty bad around the rear-view mirror mount. Needs improvement for sure, not worth the price. Update: FitCamX reached out to discuss the issues but basically brushed it off as the quality being consistent with cameras in this price point. Pretty poor customer service, considering my $90 cam I had previously could produce a better picture quality and had better app support than this. Shame because it's a great concept.