TEKTON 1/4 Inch Drive Dual-Direction Click Torque Wrench (10-150 in.-lb.) | TRQ21101

The TEKTON 1/4-Inch Drive Dual-Direction Click Torque Wrench has exceeded my expectations in every way. From the moment I picked it up, the build quality was apparent. It feels solid, well-balanced, and engineered to a much higher standard than many torque wrenches in this price range. The torque adjustment mechanism is smooth and easy to set, with clear, easy-to-read markings that make dialing in precise torque values simple. The click is distinct and easy to feel, providing confidence that fasteners are being tightened accurately without the risk of over-torquing. The dual-direction capability is another great feature, allowing accurate torque application in both clockwise and counterclockwise directions. I primarily use it for motorcycle maintenance, small engine work, and other precision applications where inch-pound accuracy is critical. It performs flawlessly and inspires confidence every time I use it. The included storage case is sturdy and keeps the wrench protected when not in use. What really stands out is the value. TEKTON has delivered a professional-quality tool at a price that is accessible to both DIY enthusiasts and experienced mechanics. If you're looking for a reliable, accurate, and well-built inch-pound torque wrench, this one is an easy recommendation. Highly recommended—an excellent addition to any toolbox.

Opened up the zippered hard-side case and was immediately impressed with the feel, markings, handling of the micrometer adjustment and smoothness of the ratchet mechanism. Not a big fan of quick release buttons on ratchets as it requires a hollow drive wheel that weakens the drive plug. Could have left that out of the design and it wouldn't have mattered. Proper maintenance of the ball bearing with a drop of penetrating oil periodically prevents having to pry sockets off. However, it's not much an issue with a torque wrench that won't be expected to break stuck fasteners loose. The markings are very easy to read as is adjusting the torque setting. This wrench has the newer style slip ring collar that you pull down to unlock the handle to turn it in one inch-pound increments. I've never encountered half inch-pound specs that would call for a wrench spanning this one's 10-150 inch-pound range. If I did, I'd simply round up or down and be done with it. Even at the 10 inch-pound minimum, 0.5 inch-pound is 5%, nearly within the wrench specs and close enough for practical purposes. Those working on stealth aircraft with composites, spacecraft, and nuke weapons, requiring 1% or better accuracy wouldn't be using a Tekton to begin with. Tested its operation using a 1/4" drive breaker bar with an 8-point 1/4" socket (for square head nuts, bolts and screws). The "click" is easily felt and unmistakable throughout its range, even at the 10 inch-pound setting. Did not notice any difference in forward or reverse. There's a popular misconception that the "click" is intended to be audible. While it is audible, depending on ambient noise level (some shops are noisy with machine tools and ventilation fans), it's designed to be felt by the hand turning the wrench as one roller bearing on a beam rolls over the top of a fixed roller bearing on a heavy spring causing a "break" of about 10 degrees or so in the turning of the wrench. Release pressure on the handle and it snaps back. The fabric covered zippered semi-hard case is a departure from the common blow-molded cases most wrenches come with now. It's not going to put up with the bashing and banging bouncing around in a box with other steel tools would subject it to. I don't store or carry torque wrenches in that manner anyway. They're (semi-)precision measuring instruments, not breaker bars or sliding T-handles, and should be reasonably protected. Some may take issue with the case and its robustness compared to a blow molded. I don't. I've handled, used and owned numerous tool brands over the past 45+ years, including high end Snap-On, S-K and Proto that I still own and use. This is an impressive torque wrench, most especially at its price. One could easily spend 2x - 3x or more on a bi-directional 1/4" drive micrometer click wrench and not get much if anything practical at all for substantially more money. Final Comments: A torque wrench should NEVER be used like a breaker bar to break loose stuck or corroded fasteners, most especially a bi-directional like this one. It can easily ruin its calibration and can permanently damage the click mechanism inside the wrench (even on a uni-directional). Proper use is turning slowly and firmly as the fastener tightens until the wrench "breaks" about 10 degrees or so indicating the torque setting has been reached. It's much more feel than audible, especially in the level of ambient background noise commonly found in many garages and shops. Using a torque wrench is not a racing team pit crew contest. Achieving proper torque with one reliably and repeatably is a deliberately methodical process - with the wrench being turned only from the middle of its handle. Might seem counter-intuitive, but choking up above the handle, or worse yet using a "cheater pipe" to add length to the wrench won't accurately torque the fastener. I've seen this demonstrated on a torque calibration machine and the reason has to do with the design of a click wrench and its internal beam mechanism; they all use the same mechanical concept internally.

Instruction are clear and easy to understand - This is JUST a torque wrench - does not come with any attachments - - In my opinion, it's best for use with bolts up to about 1/2" - if possible, get the bolt or equipment manufacture's specs on max torque. My purchase was for M8 (3/8") bolts at 12Nm One CAN order a wide variety of accessories (personal experience), and, as it's a standard 1/4 inch drive, most users will likely already have most everything that will be needed Once the tension is set, ( up to 150 inch/pounds [in-lb] or 16.9 Newtons/Meter [Nm] - ) there is no need to "read" anything - When the set torque is reached, there is a slight "bump" that is felt through the handle. (if your hearing is better than mine, you may hear a "click") The instructions suggest - wisely - to practice a bit to "get the feel" of proper operation. Personally, as I am getting old and my eyesight is getting bad, I prefer this method - - Because I don't have to struggle to read a scale or a display to know when I've reached the desired torque. (Being a bit of a gorilla, I have a tendency to snap bolts off - especially small bolts (1/2" is "small" to me) - so this tool is a great damage saver) Setting the desired torque is also very simple. Although some folks who are not familiar with the technique may have a short learning curve, it's just a matter of turning a knob until marks line up. The instructions have very clear pictures. The settings are in both ASE and Metric, so it is not necessary to mess around with conversion tables or calculators - although a conversion table IS included with the instructions. One precaution though. This is an all meta tool - if using on electrical equipment (which is my usage) it would be wise to wrap electrical tape around any accessory that may be at risk - and keep it in good shape. Shock hazard aside, a short circuit can cause extreme heat and serious burns. This precision instrument comes, as it should, in a nice hard fabric storage case with a tight zipper - the instructions fold nicely in the case - the tool is held in place in a pocket on one end, a Velcro strap on the handle. This case comes in a plastic bag and in a nice sturdy cardboard box - I store this combination in my home - not the garage or tool box - as befits a fine scientific instrument. One last thought - described in the instructions - my grandfather, a custom jeweler and watch maker, taught me that springs - and this device depends on a spring - springs have "memory" - that is, if left wound up, they loose their temper (as if they got angry and being cooped up too long) and 'forget' what they are supposed to do. SOOOoooo, always change the setting to the lowest point when puting this tool aside - especially when putting it into storage. Otherwise, it will loose accuracy over time.

I have 3/8" and 1/2" drive TEKTON torque wrenches that have served me well. So when I needed a 1/4" drive, I naturally bought a TEKTON torque wrench (model 24320). Unfortunately, I had to return them twice as both of them didn't work property out of the box. After further research, I realized that TEKTON makes 2 1/4" drive torque wrenches. Given my prior experiences with model 24320, I was a bit apprehensive about ordering this model but I was still in need of a 1/4" drive torque wrench. I decided to give TEKTON another try since I have had good experiences with 3/8" and 1/2" TEKTON torque wrenches. This model worked perfectly out of the box. So apparently, this is the model to buy and not model 24320. The "click" is subtle yet precise. This is what I would expect from TEKTON. So why "only" 4 stars? It's a personal preference, but I prefer the screw type locking mechanism over the style that this model has. This style works well and it's easy to operate, but I am just used to and prefer the screw style. I should also mention that Amazon's return policy and fast shipping are great. It was easy to return the broken torque wrenches and everything was shipped and delivered in 2 days.

Had this for a couple of years now. Use it for low torque items on three older MB's, F150, and newer Toyota Rav4. The low torque values allow the trans-filer tube (plastic) on the Rav4 to be properly torqued. When you are dealing with very low torque values (15 in/lbs) its so easy to over tighten them. I just used it a couple of months ago on the MB's for valve cover service. Some of the bolts are only 4NM, some are 8NM, and some are 9NM. Well in the range for this wrench. Tech support for Tekton is really good. I was just doing the front wheel bearings and the rotor has a set screw that is 11NM (and wheel bearing nut set bolt is 8NM), well handled by this wrench and noticed that it was slipping a bit depending on the rotation angle. I contacted Tekton support via their support www page, and received an email within the hour. Short story, since I had the super small T6 screwdriver to service the head, they sent me a full head rebuild kit. If I did not have that - they would have replaced the wrench - life time warranty. Today the repair kit came, and it was a simple (but you need to be careful given the small springs) procedure to replace all of the head internal components. Now it works perfectly again. Can't ask for better support - they stand behind the products. Comes in a nice case, I leave it in the case with no tension for storage. Highly recommend.

It's really nice to have a torque wrench for lighter needs and this one is perfect for it. I have to replace the oil pan on my wife's X3 and they are definitely bolts that cannot be too tight (they're aluminum one time use bolts). This was perfect for my needs. I have a the 3/8" Tekton and 1/4" Tekton wrenches and both are really handy, seem accurate, and are of good quality. They legitimately do feel well mad and have a positive "click" when you reach the assigned torque setting, and both are easy to adjust and read. Overall, these seem to be really nice for the price and I'm very happy with them both.

I'm very mad ! Says 150 x-pounds but broke on first try at car lug nuts, the only "click" was it breaking ! Totally trolling with that above. I usually go for CDI torque wrenches but this TEKTON is a luxury for that repetitive 89 inch-pound spec, if you know what that is then you know what I mean. This wrench is also ideal for working on bicycles and is calibrated for both directions (some are not, but do you need that). Kobalt doesn't have a 1/4" drive and the made in China Husky costs as much as Capritools Industrial Torque Wrenches (mise well go for the better wrench in that case). 12 x 12 = 144 and this TEKTON is a 150 inch-pound torque wrench, the "ideal" range is 4 to 12 foot pounds while a 200 inch-pound torque wrench is ideal from 6 to 14 foot-pounds, and a 250 inch-pound torque wrench from 8 up to around 20 foot-pounds... Those foot-pound number's aren't specs, they're just my opinion of "ideal." So do you get 1, 2 or 3 wrenches just for 1/4" drive ? It can cost $45 to $450 just for the 1/4" range until 3/8" drive comes into play (3/8" usually just needs 1 but can be 2, then another 2 for 1/2 inch)... This $45 TEKTON has it's place in the world.

I've put off buying one of these for years and now I regret that. I just put a Cruze together and used this multiple times. It appears to be built well and solid. This was a better choice than others as the minimum setting is 10 lb-inch where every other one I could find had a minimum setting of 20 lb-inch. The only thing that didn't work was the detent ball for retaining the socket. But a little penetrating oil and all was good. I wouldn't hesitate to buy this again and I recommend it.

This 1/4" Tekton torque wrench (TRQ21101) is of very high quality and it has worked very well for me installing torque-to-yield 89 in-lb water pump bolts. It's small and fits into tight places, and the etched numbers and lines are fantastic - very easy to read. The tool's feel is solid, the function is smooth and tight, and it just feels excellent. This is top-quality IMO. Same league as the box truck names.

Easy to set, with two scales (metric and imperial). Its a bit of hassle on the need to set it back to low tension value for storage.

É um produto excelente para apertar parafusos e porcas sem correr o risco de apertar de menos e ficar frouxo ou apertar demais e espanar a rosca ou o parafuso/porca. A escala de 1.1 a 16.9Nm permite que se use este torquímetro em ajustes delicados. A única coisa chata é a calibração no sistema imperial (libras, polegadas etc) em vez do SI (Newton, metro etc) o que exige atenção na hora em que for ajustar o torquímetro por isso é MANDATÓRIO LER O MANUAL tanto na operação quanto na hora em que for guardá-lo. Recomendo comprar um adaptador de 1/4 quadrado para 1/4 sextavado ou estriado caso queira usar bits de parafusadeira.

Estoy usando este llave dinamometrica y de momento todo bien.

Top quality, perfect for what i need.