Pro Series Wt760051163 Hardwood Floor Refresher, 32-Ounce

When I first started learning about how to care for hardwood, I really did my homework. My husband and I have an older home with hardwood floors that were in need of a new finish. I thought I would try a product that would tide us over until he could do the thorough job of a new polyurethane finish. I called the company to find out all the answers about these products because I read so many conflicting reviews about the refresher and the polish. Many people didn't really understand the difference between them or how to use them. This is what I found out: (1)The refresher is the product that was right for us. We have wood floors that had a polyurethane finish on them, and they hadn't been refinished for about 6 years. They were looking so dull, and I felt they were becoming damaged from the water and dirt being tracked in, but with the holidays upon us, I didn't want us to take on the more time consuming project of refinishing with polyurethane. I wanted something that could be done quickly and easily and would look nice and keep the floors from getting more damaged. The refresher is the product made specifically for floors that already have a polyurethane finish on them. The refresher is a polyurethane product itself and so it combines chemically with your finish and will NOT have to be stripped off when you go to refinish your floors. When you use the refresher, it will add a beautiful luster and it will only take minutes to apply and minutes to dry. (2) Not so with the polish. It is NOT meant for floors that you intend to eventually refinish with polyurethane. It is just as easy to use, it looks just as nice, and it will cover over your polyurethaned floors just fine, but once you use it, you CANNOT use the refresher over it (a polyurethane product) and you CANNOT refinish your floors with polyurethane after using the polish, without first stripping off the polish. Before I understood the difference I went ahead an used the polish on one section of my floors, my hallway. After that, I found out that I should have used the refresher since we intend to refinish our floors with polyurethane. But from this point on, I will have to always use the polish on my hallway and the refresher everywhere else, unless I want to go through the trouble of stripping off the polish and using the other product only. Since the polish did a great job putting a shine on the floors, I will just continue to use it on that one spot. (3) I specifically asked the company which is the more durable product, and they stated unequivocally that the refresher is the longer-lasting, more durable finish. (4) I asked if you have to use a damp pad to apply, or a dry one. The company said that they used to say use a damp one. Now they recommend using a dry one. The reason is because they figured some people would use a pad that is too wet and would affect the product results. My opinion is that you should definitely use a damp one, but ring it out so it is barely damp. Otherwise you will waste too much of the expensive product in the pad as it would soak so much more of it up. Anyway, the company recommends rinsing out your pad as you go if you are doing a large area. I found you don't need to rinse anything if your floors were very clean to start. It is very simple to use. Just squirt it on just as it says, generously, and then glide it all over the floor. You can do a dining room in 5 minutes. And it will be dry to walk on in socks in 20 minutes. Atleast that was my experience. I didn't have to block the kids from using any rooms really because it dried so fast. I also love their floor cleaners and their tile polish. The more coats you use (whether it be the tile polish or any others) the shinier your floors will turn out. They all worked so well. And they go a long way. And they don't strip off the polish that you apply to the floors.

I have wanted to have my wood floors refinished for years, but I haven't had the resourced to do so. I was willing to accept even a little nicer than the worn out floors I had. I had been spot cleaning spills and occasional dog accidents, and then doing some general mopping. Clean was OK, but not really satisfying. The shine I wanted, however, was out of reach. Somehow, I ended up on the Bona page on Amazon. I previously had ordered a Bona product that didn't do hardly any better than what I was using. I went back to Amazon, and found the Bona Pro Series Hardwood Floor Refresher, and bought that. Not really expecting anything better, I applied it with a soft cloth on my hands and knees to a small strip of wood in my dining room (a place where I could remove it if I hated it). I was very surprised and pleased with the result. I looked at it from different angles in different lighting. The floor had a deep lustrous glow that I liked a great deal. Not shiny glossy (but then I didn't want that). Lustrous and pleasing. I applied it on my hands and knees, because I always do my kitchen floor on my hands and knees - something earthy and tactile, very satisfying about it. I could see up close what I was doing and covering, and I felt I had far more control of the product being applied to the wood. I had received one of these terrible applicators with the other Bona product (TOTAL waste of money - no control whatsoever with a pole that wobbled all over the place and pads I didn't think did any good), and I ended up on my hands and knees anyway. This product was easy to apply, easy to control during application, no unpleasant smell, good coverage, quick drying (faster than the bottle says), and made places in the floor worn by heavy traffic and dog shoe damage regain pleasing appearance. It's not as good as having the floors sanded, stained, and resealed, but for the price, I'm happy. 32 OZ. covered a lot of floor, even though I was generous. I was on a tight schedule, and although I could only do sections of a few square feet at a time, I got the job done in plenty of time. And each time I stopped, I sat back and appreciated the results. Can't beat that. I like this product a lot, and I'm going to order more. Good product, good value. I recommend it.

I normally don't write reviews, but his one deserved it!! My new hardwood floors were looking pretty dull due to our cleaning lady putting Orange Glo and Pledge oven them, despite the fact that I had told her that we can only use Bona Cleaner, as advised by the installer. Set in her ways, she brought these products and used them on my floor until I caught her one day! It took days and multiple tries to get the film / residue off the floor. My best solution (after trying Windex, water, vinegar, ammonia, other cleaners, you name it, I did it!) was a Bissel Steam Mop (Fresh and Clean model). I went over the floors twice with the steam mop. I will not continue to clean with the steam mop, but it was a BEST SOLUTION to remove the residue and gunk off the floor. I had to change microfiber pads and terry towels that I was using with the Bona mop head MULTIPLE times. Even though I had spent two weeks cleaning the floors already with multiple products, you would not believe the grey gunk, film, residue - whatever it's called, that was picked up on the pads. After several steam moppings, the floors passed a white sock test (skating over floors and not dirtying socks). Hurrray! So STEAM MOP, awesome solution - but recommend to do it just this time as an emergency fix and not a long term cleaning habit. The heat did not damage my floors, but over time it could remove the urethane and damage the wood or seams. It was 80.00 and totally worth my wasted time and effort. NOW, I needed to get the LUSTER back to my floors. The oily silicone products did away with that. Well this Bona Refresher left them like new!! and the application was super easy!! My whole house took one full 32 oz bottle (+/- 1000 sq) I would recommend you buy two because depending on how generous you pour and how shiny you want it, you may want to add another coat. I only did one coat and ended up with the luster I wanted without an exaggerated Shiny floor. I understand this will last a few months. But now that I know it's so easy, I can apply a few times a year with pleasure! Lesson learned! DUST floors daily or multi-weekly with bona Dust Pad. Use Bona CLEANER as needed, perhaps once a week (love their handle and pads!!!) - glides effortlessly! Bona REFRESHER a few times a year. NOTHING ELSE!!

I just got a new condo and the floors were a bit blemished from the past owners. There were numerous scratches, scuffs, and minor imperfections. I decided to spend a weekend cleaning up the floors, which consisted of covering up scratches (Old English Scratch Cover), cleaning the floors (Bona Hardwood Floor Cleaner), and then protecting the floors with this product. To preface this, I did not use the Bona mop like they suggest. Instead, I used a Swiffer with generic Target pads that I had laying around. It worked well enough in my opinion. I applied the product directly on the floor and spread it out with the grain of the wood, as directed on the back of the bottle. I did this for my entire floor and was presented with streaks and haze on parts. I discovered that the streaks were probably from using too little product. The best results were from the sections where I used more product than less. I had to apply two coats because I was unhappy with the streaking from the first coat. The streaks went away with the second coat and I was left with beautiful floors again. The finish is not shiny, but lustrous with a light finish, not shiny but not quite matte. Working time of the solution was a few minutes, dried within about 45 minutes. Try not to walk on it for a few hours, supposedly. It is ready for full traffic after a day or so. Cons: Word of warning: this product is thin and watery. When applied directly to the floor as directed, it naturally splashes a bit. This can be a pain when you splash on segments you already went over. If that segment is wet still, you'll be fine to go back over it with the mop. But if it's already starting to get tacky, you might need to reapply product and go back over the segment. The nozzle/cap drips also, which can be frustrating. I had to tape a paper towel to the lower half of the bottle to keep it from dripping onto the floors. Also, keep in mind that if your floor is wet and you step on it, you'll leave a footprint. Also, when you lift the mop up when you reach a wall, be aware that your mop may leave little bubbles. If these bubbles dry, your floor will have hazy/rough patches. I found that when I saw these bubbles, put the mop down on them and drag away from the wall, lifting as I get further away. In all, I am pretty happy with the results. They're not perfect but darn good. The nozzle on the bottle is messy and you need to use a fair amount of product to get good coverage, but if you are aware of the product's shortcomings, your results will be good.

After mopping with the regular Bona products, our hardwood floors looked great until people walked on them. You could see like a grey haze on the floor. A flooring store recommended that I use this product to remove that haze and footprint marks after I mopped. I used this product. Our floors now look amazing. If you walk around in socks the floor no longer shows footprints. It's like night and day. Make sure you get the beige Bona mop head for using this product. Check out the Bona video online before you use this product. I wet the mop with water the first time thinking that's what I was supposed to do. It ruined everything. You're supposed to get the mop wet only with the product.

We used this on our hardwood flooring which gets a lot of foot traffic in the hopes that it would refresh it a bit without having to do a full re-finishing. We were pleasantly surprised at how nice it turned out. The product coats evenly, just make sure that you do small areas at a time. Otherwise the product will build up a bit. It helps being able to see the flooring at an angle to prevent what look like drip lines. Evenly spreading out small sections ended up working great for us. The finish was not quite as shiny as we thought it would be. We used a second coat and that helped with the shine. Be warned though it does not leave a glossy finish. The only negative I see is that the product seems to get used up quickly. This is only of the few products by this company that does not get sold in the larger size. I'm not removing a star because off that, but the company should consider the larger size for this. If you are like us and have large amounts of wooden floors, it took quite a bit to get them all. All in all, really good product that did what we thought it would. It provides added protection, makes the floor look refreshed and gives the wood a bit of pep back.

First, to be clear, this product is a permanent urethane topcoat, not your normal removable floor wax. I feel like Bona's "Floor Refresher" (this product) and the "Floor Polish" have the names reversed. This stuff is permanent and the floor must be really clean. Anyway, I used this on a new pre-finished 3/8" solid stranded bamboo floor installation, which is not exactly a recommended application by Bona. However, this product was explicitly listed as the only approved permanent topcoat by the flooring manufacturer (EcoTimber). The idea was to seal the joints between the boards from spills and pet accidents, which can really destroy bamboo flooring when the liquid gets trapped under the boards. So I set up some practice boards from scraps and the application worked well with three coats. Then, due to the layout of the room, I put down three coats on one half the room. I used an applicator from a hardware store ("Water Whiz") that was specifically recommended for water-based finishes for the first two coats. I felt like those coats went down really thin and all of the little air bubbles (like suds) created by that applicator had me worried, but they disappeared before the finish began to dry. On the third coat, I used a brand new Bona blue microfiber mop as recommended on the bottle. Bona warns against too thin of a coat leaving streak marks, so I thought I put it on heavier but still got very minor streaks. When I started the second half of the room a few days later, I stuck with the blue Bona microfiber mop with a new mop head. I put the first coat on as heavy as I thought I could to avoid streaks and in hopes that the liquid would self-level. TOTAL MISTAKE. Instead, the heavily applied film tended to bead up and dried very, very splotchy. I put down a second coat pretty heavily, hoping to hide the first coat, but it only helped a little. On the third coat, I switched back to the hardware store applicator and I got slightly better results. In short, I totally disagree with Bona about using their blue microfiber mop and about the thickness of at least the first coat. Granted, I was applying to a brand new floor and the cleanliness of the brand new prefinished boards may have contributed to some surface tension that caused the film to bead up like it did. I am not qualified to make a recommendation, but I can offer the observation that the first half of my floor that got a really thin "primer coat" of this product with the non-Bona applicator looks pretty darn good. To be honest, it went on so thin that the floor wasn't really any noticeably shinier even on the second coat. I think that the really thin coats served to create a good bond with the floor without being thick enough to splotch up. Again, without making a recommendation, it seems to have worked really well for me on the first half of the floor. I should emphasize that the floor looks really great from a distance and during daytime lighting. But at night with the recessed lights on, you can definitely see the splotches from standing height. Also, this stuff scratches much more easily than the factory applied prefinish. So unless you have a good reason to seal your floor board joints or you really want a high gloss floor (it looks great though!) or your floor is already damaged, maybe this isn't your best option.

Very Happy with my end result. It was easy to apply, found some videos on YouTube. I touched up obvious nicks in the wood with a stain pen and then applied the refresher. It’s been a couple of weeks and looks like new. Anxious to see how long it lasts, but I will definitely be more confident with any future coats that may be needed.

Exactly as described gave the floors a perfect satin finish

Great stuff that saved my hardwood floors. However, MAKE SURE YOU DO YOUR HOMEWORK to confirm this is what you need. This completely restored the shine, but scratches and blemishes remain. Perfect for those wanting to restore the shine of your hardwood floors, but don't need to sand and refinish!

We had to put 3 coats on 1 part of floor. 1 coat on the other part. It looks wonderful. Floor is 17 years old so it was really dull on part of it. Loved it.

Great product

Fantastic !