Xprite White Truck Pickup Bed Light Kit, 24 Led Cargo Rock Lighting Kits w/Switch for Van Off-Road Under Car, Side Marker, Foot Wells, Rail Lights - 8 PCS

These are very bright. I love that they have connectors build on each light segment. Also the product has long wire leads. I would love to have another set in white for my bed as I used the amber set as clearance lights. They have true 3M tape on th backside which is reassuring during installation.

i used these for the inside of my truck even though it says they are for the bed they work for the interior as well and they look great worth the money 100% almost a year later and they still work fine. very bright cable is super long so i had to zip tie it together but its good if you need a long cable i didn't need so much but i made it work. i wish i could change the color but blue works for me.

So I bought this product to use as a underbody light kit. I found the fact that it is a pre-wired kit and the overall length to be perfect for lighting under my Ram 1500. The connectors to string the lights to each other don't appear to be weather tight so I did opt to cutting them off and using a heat shrink butt connector to give the peace of mind that no water will cause the lights from not performing as I wanted. The lead wire is a very generous length and made it easy to run it to power and ground. I tapped into an existing stock light so when I turn my cargo light on or when I unlock my truck these lights turn on and light up the ground around my truck. The light output is pretty good, there are brighter products but if this was used for its intended purpose it would be plenty bright enough. The light color is pretty white but does give off a very slight purple hue so it's not a pure white output. Overall, I am very pleased with the purchase and product.

These are plenty bright. I installed them along the underside of my Toy Hauler in front of the axels. Now at night I can see the road and lines beside my trailer to verify where my trailer is. I wired a switch to each side so I can also use them at night when the running lights are off or have them off all together.I only wish that the wire connectors between the lights were waterproof. I added dielectric grease to the contacts and wrapped them in rubberized sealing tape so they should last.

Nice and bright for a truck bed light but do not overtighten if you’re screwing them down. The foam backing allows it to bend if you do and it breaks the connection so all the lights down the line won’t work either. Also the current draw is very small so I wired directly into the 2 factory ram bed lights, so they come on with them and the factory switch. Time will tell about durability though.