120mm/ 4.7 Inch Digital Protractor Angle Finder

Quick delivery and item is exactly as shown. I was surprised by how good the quality is, didn't realise it was cast aluminum so it has a good weight to it. The magnetic base is brilliant, no chance of it falling off things when using the magnet. It couldn't be any easier to recalibrate the level, and the fact you can choose 4 different measurements Is a plus. Easier to have it in mm, and when tested against the trend digital level it's bang on the same readings. Comes with a little pouch too. For £20 it's money well spent, so I'd reccomend it. It has a loud buzzer noise to let you know when you're close to level or 90%, it will then hold the bleep when it's bang on. You can hear the buzzer no problem on a busy construction site, but this can be switched off if you prefer that. Prefer it to my trend digital level. 10/10

very happy with this level. I needed it to level my mini lathe and it performed well, much easier to use than a precision level and just as accurate. The other advantage is it's use to set angle in the milling machine once zeroed on the table.

This is very solidly built and works quickly. It arrived slightly out of calibration as assessed but measuring then turning it 180 degrees, and is better after an easy recalibration but still measures 0.05 degrees differently in each direction. It's spot on fir vertical though.

This guage feels very well made, is solid and has weight to it. It feels good to use. I got this particular model because it has a flat metal surface with a bit of length, making it easier to measure across a rough surface and the display is well protected by the metal lips at top and bottom. It seems as accurate as it says. Operating it is nice and simple. The price is good for what feels a high quality item. I am delighted with it.

Good quality & robust.

I love this so much. Bye bye spirit level. The only reason I use my spirit level now is to sit this on when I'm taking a reading. It is so much more acurate than a spirit. The best part is the ability to match non-levels. So if I have somehting existing that is 14.8 degrees, I can easily put in new members that too are exactly 14.8 degrees. So simple to use, and nice bit digits that are easy to read. Small enough to get into awkward places too.

So I have to give this a mix review, this is because it seem quite accurate, seems to take a little to settle and if you nudge it it can take longer to settle, not sure the V bottom is the best, as most of the work I have been doing is flat. But I don't like the sides and think they should have been square and not bevelled. See photo

Used it the match the level of my Galvo laser head to the bed, and its compact size was excerlant for this and im sure manyy more small areas.