HOTLINEGAMES 2Sets 3.0 Plus Rounded Curved Edges Mouse Feet Skates Compatible with Logitech G Pro X Superlight Wireless Gaming Mouse feet Replacement (0.8mm, Smooth, PTFE) Pro Performance Upgrade

Bought the HotlineGames replacement skates for the Logitech G600. Don’t usually leave reviews, but if you need replacement skates, these are the ones. PROS: - Perfect fit - Less prone to scratching/indentation - Seem durable as of day one - Quality adhesive & packaging - Glide smoothly, literally just like new - Comes with two sets, plastic tweezers, tiny microfiber cloth, and two alcohol wipes - Amazon Prime shipping CONS: - Only available in white for the G600 (yuck!)

I have a Lightspeed G502; noticed the tape on the bottom was peeling off and affecting my mouse movements. I'm always skeptical about buying after market stuff like this, but I was very impressed. I cannot speak to the product's longevity, but they include 2x scates so that's a huge plus. Good: 1. First and foremost this works well. Actually, too well, I had to readjust my DPI because it was moving so much faster on my hard mouse pad and also my cloth pad, about 100DPI to be precise. For that reason it accomplished the goal perfectly. 2. It included a microfiber cloth and 2x pads should the first one die. If this gets a year or two on one, it’ll be great. 3. Very easy to install. And cheep. Bad: 1. It didn’t have tweezers to pull off the existing tape which some of it was very put on. This wasn’t a huge issue for me as another product I bought that same order came with a set that I used. 2. It wasn’t super-duper taped on vs the factory which was 3M heavy duty style tape not a make or break thing but I could tell this might cause it come off faster. Overall it does what you need it to do and is a lot cheaper than getting a new mouse if you already love your current one they support.

I purchased these skates because I needed to remove the factory skates on my logitech superlight pro in order to get access to the scroll wheel inside. I was having a scroll wheel issue due to accumulation of dust and cat hair. Needless to say, the issue was resolved and the new skates felt great. A few months passed and I ran into the scroll wheel issue again but I was hesitant about removing the skates because I didn't want to keep purchasing new skates and replacing the old ones every time I ran into the issue. But after putting up with the issue for a while and almost going crazy, I decided to bite the bullet and go for it as I remember noting that there were 2 replacement skates that came with the original purchase. To my surprise, the skates came off cleanly with some gentle prying and lifting. Whatever adhesive was used did not cling to the mouse and destroy the skates in the process (like the original manufacture skates did). THIS is the reason why I'm giving the skates 5 stars (I would give 6 stars if I could) as the manufacturer's adhesive goes above and beyond and turns the skates from a single use product to something that can survive removal and reapplication to the mouse, allowing someone to continue getting access to the internal hardware of the superlight pro without having to worry about wasting more money on skates every time this is needed. Highly recommended. Would buy again, but don't need to!

Product is great, got everything i asked for and then some. The packaging was nice and sleek . Came with some plastic tweezers that helped with the removal of the older pads. 2 wipes to help remove any residue and a microfiber cloth for clean up after the wipe. Install was the easiest i have done compared to any other pad I've bought in the past, primary due to how stiff and not flimsy the pad itself was. I'll update later on wear and tear, till then 4/5.

The stock skates on the G604 are traaaaash. These skates are much smoother and fit just as good, if not better, than the stock ones. It is also nice that this company makes aftermarket skates for mice that are discontinued like the G604.

Works exactly as intended and fits the Viper V3 Pro perfectly. I had no issues with it, and the installation process was very easy. For $11.99, it’s a great value, especially with the fast delivery. I’d definitely recommend it if you want an affordable option that gets the job done well.

These were easy to install and make the mouse glide smoothly. They’re actually lasting longer than the original skates, which is a nice surprise. The rest of the mouse will probably fail before these skates do Really happy with them so far.

First, I'm rating this one star and will not change it because well, while the mouse skates are better than stock because they are aftermarket, rounded and, definitely .8mm: they do NOT fill out the sensor foot thing. If you're getting burrs with the mouse, first, notice that the uh, stock skate on that is flush/not rounded but maybe a little. Surprise, it's 0.7mm. ALSO I bought two sets of these (fact check me, seller). Set one arrived with the same issue: idk how these bent in the packaging. I will admit I did mess up placement on one but, uh, i left a mark with the plastic tweezers. The bottom skate is before I reattempted placement for the fourth time but noticed...the skate's edged were scuffed? Yikes. Last, honestly, if you get any burrs: try taking off the stock sensor skate and go without. These skates also do not fit flush with the fillout and while I did nail the placement once (see last image) it took four tries ouf of two purchases and still, it's off because it should be filling out the hole but it's not so lame. I honestly think these might have been a bad bad and I'm trying to help the seller know because they're the only ones on Amazon that sell them and i dont want people to lose their money. Save it. Anyway, again: honestly, these are only worth it for the the three main skates but even with those, I ended up going with glass skates because the dpi sensor one was wasnt filling the skate holder and caused more burrs than even the stock skate but i think it was just defective. Maybe the adhesive too because two arrived kinda slid off the plastic/heat idk im mad i wasted my money. LOVE A sad customer that wanted to support a japanese business

White for black.mouse but good skates

Swishhhhh. Such function! All gamimg games seeing the boost, white so bright! Sleek, precision cutting, accurate design.

Worst purchase ever, now my mouse is ruined.

I love my Logitech G700S, it's the best mouse I've used, but after almost 10 years of almost constant use and one replacement set of mouse feet later, it really needed a little bit of extra love and care. I took the mouse apart, cleaned it, replaced the left mouse button switch and then went searching for decent mouse feet. All of the feet I found available were cheap and looked it, apart from these. Other replacement feet are thin and have visible surface marks from manufacture. These are much thicker and the surface is smooth. I used a bit of TIM cleaner to remove any dirt and grease from the old, attached feet, and simply stuck these on top as a little extra height helps stop grease build up on the surface and makes it easier to wipe down. I have been using a hard mouse mat ( QPAD - ECR) for years and recently bought a Steel Series Qck cloth pad as a replacement, which I didn't get on with. I now have a Razor Sphex V3 stuck onto a glass plate. The combination of these feet and the Razor pad suit me very well whether it be causal use, but more importantly gaming. The Steel Series pad gives a good, but slightly heavier feel to movement, which isn't for me, but the mouse feet work well and offer a consistent glide on both surfaces. I hope that helps anyone trying to make a choice. There's no need for the supplier to provide two sachets of alcohol wipe, a cloth and tweezers. It's wasteful, but 2 sets of quality mouse pads for £6 a go is good value. If you are walking all day you don't cheap out on footwear so why do the same for your mouse? Delivery was within 2 days and excellent considering I ordered late a night.