Pond Armor SKU-GRAY-GA Non-Toxic Pond Shield Epoxy Paint, 1.5-Gallon, Gray

Q: On a water feature. what colors are available? i need how many coats? how long does it last? can you paint it over existing pool color of blue?

Pond Armour offers a variety of colors which may be viewed on their website. Two coats are recommended & I have to agree. Previously painted surfaces & cracks should be repaired & pressure washed or sanded prior to application of Ponds Armour for maximum adhesion. Like span of product will vary depending on location & climate. I used 7 gallons resealing a large concrete reservoir . It sealed all microcracks & I am very pleased. Proper preparation is essential for maximum adhesion .

Q: Will this work for fiberglass submerged pool steps?

Thanks for your inquiry. Yes, Pond Armor can be used on Fiberglass. I've copied some additional information from Pond Armor's application FAQ on their website. If you need more help you can call Pond & Garden Depot toll-free at 1-866-305-5459 Cody H. Customer Service Fiberglass Surface Tooth – Thoroughly sand fiberglass with 60-grit sandpaper. Cleaning – It is recommended that the finished surface be cleaned with wax and grease remover prior to coating. Use one lint-free cloth to apply the wax and grease remover and another separate cloth to remove it. Use gloves to keep from contaminating the surface as you clean it. Application – Gloves should be worn during the application process as the oil in your fingertips could be enough to contaminate the surface of the fiberglass.