5-Tier Steel Wire Shelving, 30"W x 14"D x 61.5"H

TL;DR: Buy these shelves. It's super easy to put them together and oh, the space you will have. The Elle-aboration: I'm a small female living in a small apartment with NO storage. It's been driving me nuts, so I finally took the plunge and ordered three sets of these shelves - two for my walk-in closet that I finally reclaimed from my cats and one for my pantry. I was worried about the weight of the shelves - how to get them up the stairs, how to unpack them. I was worried about doing this alone. If those are your concerns, worry no more. Here's why: 1. Yeah, the boxes themselves are 30ish pounds. Thankfully, UPS delivered them to my door, but even if they hadn't, I could have cut the boxes open and carried them up the stairs in a few trips. Do not let size/weight of these puppies deter you. Although I'm a little scrappy, I'm also a 5'2" female, well over 40, and wear a size 4ish, and if I can do it, you can do it. 2. The shelves are super easy to assemble and lift. Even doing it by yourself. Even if you're on the smaller side and unhulky. Even if you're afraid of using wrenches and totally confused by lefty-loosey, righty-tighty (because eventually everything goes left and everything goes right so really...?). Even if you watch the videos and wonder if you can do that. You can. DO NOT FEAR THESE SHELVES. There are some tricks I'll share for how I did it in 10 minutes, first time out of the gate (or box, actually). The trick is to stay organized and begin on a waist-high horizontal surface. Not the floor. Here are the steps I followed that made it super easy: 1. Unwrap and keep your bottom rods and top rods separate, just to stay organized. You'll receive 8 rods (4 top, 4 bottom). The bottom rods are where you put the feet or rollers, and there's a small hole where both will fit. You'll know it when you see it because the pieces are well-organized by the manufacturer. (Thanks, Seville!) 2. Put the feet or the rollers into the bottom rods. I didn't even have to use the little wrench thing, but it's super easy to use, too. Put the round plugs into the top rods. Once you do that, you'll notice that both have holes with threads in them. That's where you're going to put the screws that hold them together, but don't do that yet and keep them separate. 3. Decide where you want your lowest shelf to go and then take two of the black clamps that stabilize the shelves, make sure the arrow and "TOP" marked on each clamp are facing up, and clip them at the same time onto the rod. You'll notice there's a little line on the plastic pieces, and then there's the line on the rod. When the line on the plastic pieces line up to the line on the rod, they will click with each other. You may have to move them until you hear them click onto the rod. The first time you hear the click will be bliss because you'll know you've got this! 4. Put that first bottom rod onto a horizontal surface, and then take your next rod, find the identical line, and place another set of clamps. If you work on a horizontal surface with the rods lying down, it's so much easier than counting lines and spaces. You can just line them up side-by-side, so much easier, and no crawling around on the floor. 5. Put the clamps on the remaining two bottom rods, again working on a horizontal surface. When you finish, you can line the four bottom rods up side-by-side and (check) enjoy the symmetry of your excellent work. 6. Take your first shelf (make sure you have it facing the right way), turn it sideways (as in put one of the long narrow sides of the shelf) onto the same horizontal surface, and slide the rods through that way. No lifting, no holding it up, no balancing on the short end. Take the easy way out. Once you slide all four rods though, you can set your shelf on the floor to feel good about yourself, but don't. 7. Keep the shelf on its side with the four rods sticking out and place your second set of clamps onto each rod. It's much easier than trying to do it while the shelf is standing, and you can line them up visually. 8. Slide the next shelf on the same way. Check to make sure that the two shelves are level (they are), and then once you have the two shelves in place, you can stand the whole thing on the floor, push the shelves down firmly, and finish the job. 9. The third shelf is the trickiest because you have to decide if you want it on the bottom rod or on the top rod. The only reason this matters is because if you want it below the second rod, you'll put the clamps and shelf on before you screw the two rods together so that you're not trying to shimmy it all the way down. (I put my third shelf on first). 10. Next, you have to screw the rods together. I was worried about messing up the threads because of one of the videos, but don't be. Just take your time. Put the threaded metal piece into the bottom rod, screw it in, and then screw in the top rods. All four rods will be securely in place and ready for the remaining shelves. 11. All you have left to do is put your black clamps on and slide the rest of the shelves into place. You'll be working at eye level, so it's easy to line them up visually, the shelves aren't heavy, and it's maybe two minutes from this point. I found it very easy to do this way, maybe 10 minutes total?, and I know I'd have gotten frustrated crawling around on the floor and/or trying to do it vertically at the beginning. Counting the rungs and visually lining them up from above, no thanks. Ditto with shimmying them down the rods. Just no. (Editing to add: I did try one on the floor just to see, and no, no, just no.) Also, a couple of other things if you live in earthquake country like I do: I put my bottom shelf at the very lowest rung and plan to place heavy items at the bottom and a wedge underneath to keep it from tipping. I put my top shelf about four rungs down so that I can use it to place things and I can secure those things with an outer strap. Then I can use earthquake straps to secure the top of the rods to the wall. IDK if these instructions will help anyone, but I wish I'd known how really easy this was. All the videos I watched made me a little wary. Several said that it's easier with two people, someone actually screwed up the threading on the rods, someone else got their clamps misaligned, etc, and all that made me dread the undertaking. As soon as I started, I realized that waist-height horizontal surface and organization were the keys to fast success, and so I had to share in case it helps someone else.

5-Tier Steel Wire Shelving works great for my needs. I brought to put my Aero Garden planters and for use in the kitchen for storage for bread machines, crock pots, and other kitchen appliances. With the wheels it makes it easy to move around. I have had these for a while and they are holding up great. They are durability, with space-saving feature and are a good value for money. I did buy plastic inserts that are available from a different manufacturer which makes them perfect for hydroponic gardening. The instructions where easy to follow and took little time to put together. One hint, count the rings on each arm so they match when putting the connectors on. It will help with getting them the right height on all 4 sides.

Excellent product. Sleek, but sturdy. It would work well in the kitchen for pots and pans or as a closet organizer. Basic assembly.

I was very impressed with the quality and ease of assembly of this shelving unit. I measured carefully exactly where I wanted it to go and it worked. I needed something that had adjustable shelves yet was very sturdy. Other shelving unit i checked had much smaller diameter metal so I am very glad I chose the right one. Round hard plastic adjustment fittings are easy to work with and instructions were quite adequate. Overall, I am impressed with this unit and believe it will be durable and will last for years. I would recommend this if adequate for your needs. Measure carefully space before you order though.

The shelving is easy to assemble and sturdy. I was surprised that with the wheels on, the allowable weight on the shelving was reduced by quite a bit, but I really didn't care about that - I didn't want to roll the shelving around anyway.

I needed basic shelves for a closet. That's what these are - basic. They're not too hard to put together - so long as you aren't bothered by pieces not lining up, and have a tape measure handy. Don't forget a mallet (not a hammer). The instructions are wrong - put the feet/rollers on LAST, not first. The assembled shelves are relatively light, so it is easy to flip them over to put on the feet. There are sets of black sleeves you clip onto the robs to hold the shelves in place. These move when you put on the shelves, and you aren't going to get them to line up evenly with the shelves or each other. (I did say these were basic.) The instructions tell you to "count the rings" to determine shelf height, but don't give you any suggestions. Either use a tape measure, or place an object that you want on that shelf, then count the rod rings for reference. You get to decide how much room is between each shelf - just know that it is a pain to move shelves if you change your mind. Do not put heavy things on the top half of the unit - it will tip forward. You will not get this to sit flush against a wall in a room with wall-to-wall carpeting. Pay attention to the measurements. The four shelf version is shorter than the five shelf version. Both fit in my closet, with varying space between the closet's built in shelf. Your milage may vary. I recommend the shelf liners, especially if you want to stack cans or other small items on the shelves. You can make your own, or buy them in sets of five.

As Bob S observed, the packaging is well done. There are little black, plastic spacers between each shelf in the box to prevent scaring. The shelf unit arrived in great shape. The ends of the tubing are protected by thick, plastic cups so nothing is dented or out-of-shape. The vertical poles are sturdy and rigid! Nice, thick tubing walls, about .045" thick. The tubing sections thread together snugly. BTW, the threaded couplings (item D in the Parts List) are already installed in the bottom tubing section. Unlike some cheaper shelf systems, the slip sleeves snap on and stay put. The interior angel of the shelf corners match tightly to the slip sleeves, making for a snug shelf with good weight-bearing capacity. Don't buy the cheap shelf units unless you have very light loads (like cereal). If you have tools or lots of canned goods, just buy this. Recommended.

Omg its such a nice shelf! Very sturdy easy to assemble just took about 15 minutes to put together if that it’s nice and strong like the flimsy ones, I’ve seen before very roomy and holding my appliances nicely. I opted not to put my microwave on it because now I have counter space for it and since it’s a convection oven and fryer, I didn’t want to take the chance of it getting ruined when using the convection or the fryer or my food getting ruined but it’s a perfect addition if you don’t have enough cabinet space and need someplace to put your food your appliances or just junk. It’s a definite yes oh forgot to mention instructions are easy , an idiot proof. forgot to mention it comes with a warranty that will replace any damage parts for I believe it would said two years. Hopefully I won’t need them since I just got it but it’s a definite if you don’t have cabinet space and you need extra storage or even to put in the closet and you can even space the shelves anywhere you want at any time they’re really easy to move around. Doesn’t wobble holds so much and actually looks very nice and great quality! Had to add i ordered the gorilla grip shelf liners and Omg make such a great difference now the shelves look complete and nothing can fall through they fit perfectly and cleaning so easy. Just the finishing touch it needed!

You have to count how many segments you want between the shelves and can be quite overbearing at first but once assembled is a solid shelf

Unstable, not good quality 😕

Robusto, resistente, fácil de armar, construido con material de buen calidad con piezas que ajustan sin problema. Indudablemente una buena compra.

Resistente y fácil de armar. 5 estrellas sin duda. Un poco caro, incluso cuando hice la compra, a los pocos días el precio lo bajaron, estaba a nada de volver a comprar y hacer la devolución del primero que llegó caro... Pero me dio huevita jejeje Recomendado.

Great product and easy to assemble!