BUCKLOS MTB PM Front/Rear 180mm Disc Brake Caliper Mount Adapter Parts

Got the front 180 for upgrading my bike to a 180mm rotor with a shimano MT201 hydraulic brake, and have been using for months now. Very sturdy, very stiff, and across both a carbon toseek and now a tito titanium fork, perfect alignment. If you're installing this on anything except a steel fork or fork with steel inserts, scrape off the threadlocker on the bolt (I don't know why this is so common) and put anti-seize on it. Bolts in dissimilar metals will galvanically corrode, and as long as you torque the bolt to 6-8Nm, it's not going to back out. Basically you should be anti-seize coating almost every bolt on a bike, only a few things should get threadlocker.

Great product, upgraded from 160mm to 180mm front rotor

They are not the prettiest but work

This is what you need if you replace your fork (like ZTZ) and have a 180mm disc

Everything seems to be fine quality and working great on my bicycle

PERFECT. Exactly what i needed, i was able get to fit my caliper on my talaria mx4 taking it from 220mm to 250mm rotor. With a couple of spacers i got full contact with all 4 pads. they look and feel sturdy and i was NOT tryna pay 40 for a bracket 😭

These adapters do not correctly offset my PM front brakes and PM fork since they slightly move the pads too far out instead of to the center of the brake rotor. I ordered the 180mm version and after installing and alignment, I noticed a bad noise from the brakes caused by the pads not fully covering the rotor surface. It's actually protruding out a bit. So instead of 180mm, it's more like ~185mm. The bolts that were included had heads and threads which were too large so it interfered with my brakes. That was fixed by using my own screws.

Easy installation. The existing adapter on my bike didn't mate exactly correctly with a new set of disc brakes I installed. The old worked but was concered I would later have issues as the alignment wasn't exactly right. This adapter resolved my issue.