JKS MFG. JKS OGS121 Front Adjustable HD Track Bar for Jeep JK

My 2012 JKU Rubicon with 3.5" AEV Dualsport lift had developed a shimmy between 50 and 60 mph. I took it to get the tires rotated and balanced and the vibrations got worse. So much so that I ended up with full on death wobble on the interstate (not the first time I had been through DW, but the first time in this vehicle). I took it to a shop who said I needed to possibly get a new track bar or bushings for the OEM one along with possibly tie rod/drag link ends. I decided to order the JKS track bar since I had great experiences with their quality on my previous Jeep Cherokee. The JKS TB is noticeably bigger and beefier. The OEM TB bolt sleeves would move around when I put a bolt in them. Not the JKS. So much more stout. While the info for the JKS TB says it works for 1" to 6" of lift, I found that it can actually be adjusted to OEM length. The removal of the OEM TB and install of the JKS TB took about an hour and a half. I lifted the Jeep just enough to put the frame on jack stands but not enough to lift the front wheels in order to keep the axle from shifting when removing the OEM TB. It worked great. I put some thread locker (blue) on the 21mm bolt threads and torqued them to 125 ft-lbs. Took it for a drive up to 55. I still have a VERY slight shimmy that I need to track down, but the new JKS TB prevents the vibrations from getting worse. The Jeep is safe to drive again. 5 stars for the JKS OGS121 track bar.

Nice piece for a lifted JKU , used a big pipe wrench to tighten the huge nut no problems very satisfied. Wish it came with new bolts though.

I was having wobble issues on my 2009 Wrangler JK Sport and this product along with a new Fox steering stabilizer cured all my issues. This track bar is super high quality and very easy to install. I would highly recommend this upgrade as it replaces the "flex" factory track bar that will tend to over flex and cause loose steering. Also, I would do this upgrade in conjunction with a new Fox steering stabilizer, since the Fox unit uses the mounting point of the track bar and comes with a new track bar bolt that replaces the factory bolt. Best upgrade combo for job Wrangler, period!

Installed track bar in 15 minutes, extremely well made. Death wobble is gone

Installed about 3 weeks ago and my Death Wobble has stopped, so far. Keep you posted if that changes. It also helped with the alignment of my front end. For the first time since I've had my '07 Jeep JKU-Rub the front end actually was able to be aligned correctly. I run 33" tires and have a 1.75" leveling spacer lift on the front which I installed about a year ago. It was not the cause of my DW issues because it started prior to installing it. This track bar is heavy duty very well made and fit my JK with no issues. UPDATE: had a small DW issue on the road about a week ago, not bad compared to the original DW issue, but it hasn't happened again even on the same bump. I have also installed a .75" spacer lift on the rear since having this bar installed. Will continue to update...