Amphenol 2-Way Digital Coaxial Splitter MoCA 2.5 ABS312H

If you are looking to set up an Ethernet backhaul using the existing coax wiring in your walls, the Amphenol 2-Way Digital Coaxial Splitter is an absolute must-have. I used this to bridge my network across the house, and it has worked flawlessly. My setup goes from the coax wall outlet into this splitter, then out to the cable modem. From the modem, it connects to my router/Ethernet network, and then I feed an Ethernet line into a MoCA device, which sends the internet signal back into the other port of the splitter to distribute high-speed wired internet throughout the house. This splitter handles the high-frequency demands of MoCA seamlessly, ensuring a stable, lightning-fast connection with zero dropped signals or interference. It's compact, well-built, and handles digital signals exactly as advertised. If you're trying to get reliable wired internet across your home without drilling new holes for Ethernet cables, this is a top-tier product to buy!

I tried using the existing coax network configuration but the MoCA 2.5 boxes couldn’t talk to each other. You need a splitter capable of passing the higher frequency and this fit the bill. It’s been about 6 months now and the network works flawlessly.

Fantastic value. I bought a pair of Hitron HTEM5 2.5GbE MoCA Adapters to run 2.5GbE from one room to another, and unfortunately realized that would not work because the wiring was partially unplugged by my former cable carrier, so they wouldn't work. I was able to quickly identify the two conductors I need and connect them with this splitter. My single pole is just connecting to the ground stake because I don't have cable service. It was extremely easy to install due to its small size, but I'm sure you could wiggle the larger ones in too. It immediately established a link and works perfectly for me..

Used for a MoCA setup for expanding ethernet connectivity. This one split my coax at the site of my old Motorola Arris SB modem and the connection to the wall to allow for a MoCA adapter to be plugged in at the other port on this splitter.

Appears to be of good quality. In place and appears to be working. Unfortunately, not an easy device to assess without the appropriate test gear. The only thing I would have liked is the addition of at least one terminator included.

Purchased a home that the original owners ran coaxial cable to every room. This splitter successfully allowed me to use the coaxial cable with MoCA enabled on my Xfinity router to run internet to wifi access points throughout the house. 10/10.

Used a 3-way & 2- way of this product, along with proper terminations, and it solved my Verizon MoCA adapter issue. Getting ~500mbs, duplex, without running Ethernet on 1gbs Version broadband. Good enough for our offices and I don't have to worry about wi-fi crowding around my neighborhood or a mesh network. No noticable impacts on TV or anything else on the cable network. Also Verizon Fios-G1100 modem has a built in MoCA adapter.

Fixed my issues with MoCa intermittenlty dropping packets/disconnecting . It is a well built device and using it in conjunction with screenbeam (Model: ECB7250K02) and Point of entry filter PPC SNLP-1GCW MoCA 'POE'. after switching out my previous splitter with this one my entire Moca network has been Rock solid . i was previously experiencing packet loss and Lag during Online mettings or when playing online as well as AP back haul disconnects. this product is worth every penny . i recommend it