Cooler MasterMasterliquid ml280 Mirror ArGB Close-Loop Aio Cpu Liquid Cooler, Mirror ArGB Pump, 280 Radiator, Dual Sickleflow 140mm, 3Rd Gen Dual Chamber Pump For Amd Ryzen/Intel Lga1700*/1200/115X

I bought this for $50 on sale. It’s easy to install, but I swapped the fans out for some 140mm Noctuas I had on a previous cooler. The default fans are loud. The mirror look is really nice, but you can turn it off if you want.I use this cooler on a 9600k OC’d at 5ghz. I have the radiator on top of my Corsair 4000D exhausting in a push config. My GPU under full load runs around 50-60F depending on room temp, so the CPU runs at that temp or slightly above. I have my fans running at 75% max on the radiator while gaming. I don’t use my CPU for anything else that’s demanding.I’ve heard some sporadic gurgling in the radiator, but it goes away after 2-5 seconds on startup.The temps do not spike as bad as my previous air cooler did, but I don’t know how it performs on CPU’s with higher TDP.If you’re looking for a 280mm radiator that has a minimal LED look, and does it’s job this does great.

Life saver. Had been running medium graphic settings while gaming and achieving a high temperature of 80°C. After installing this beautiful Mirror RGB cooler, immediately saw huge dip of 20°C. Now, I'm running high/ultra graphic settings at 60°C.

Primero que nada, tuve que comprar el artículo 2 veces (devolviendo 1) ya que el primero que me llegó no traía unos brackets para montar la bomba de agua a cpu AMD, el segundo si lo traía pero lo menciono ya que al inicio fue algo frustrante eso.La instalación es sencilla y fácil de seguir, viene con su pasta térmica y todo lo necesario, no es muy ruidoso el ventilador y mantiene en un promedio de 45 °C el procesador, estoy usando un Ryzen 7 5800x (sin overclock) y la verdad es que no me quejo de su desempeño, enfría muy bien y tienes bastante espacio para hacer overclock, el rgb me gusta mucho, el espejo RGB tiene un toque único en el buildPa pronto, si compralo, está a buen precio y te da muy buenas temperaturas.

I freaked out a bit during install since I have had an AMD cooler installed on this motherboard for 3 years on my Ryzen 2600. Recently got a 5600x with same AMD cooler which screws directly to the retention bracket through the motherboard instead of using the clip on type brackets (photo attached). I had tossed mine out apparently but luckily my son still had his from his 2 year old build. Otherwise install was fairly straight forward. I did have to trim the corner off one of the fans to fit around my RAM in my Cooler Master H500. CPU Temp dropped from 80 C while running 3DMark with stock AMD cooler to 56 C. Cinebench Temp dropped from 95 C to 73 C! Idle Temp dropped from 46 C to 36 C and it only take a minute or two to drop back to Idle Temp instead of taking around ten minutes or so. Great Performance all around. Every other temperature sensor in my case either stayed the same or dropped 2-4 C as well. I have been building Computers since the mid 1990's, but this is my first AIO cooler. I am very happy, I highly recommend this Cooler.

Es muy bueno el disipador, mantiene a buena temperatura el procesador, Ryzen 7 5800X. Jugando y a 40° ambiente lo mantiene en 61° aprox y no hace tanto ruido, hace más ruido la RTX 2070 :/ muy recomendado, pero eso sí, midan muy bien su gabinete, yo tuve que agujerear para que entrara, una de 240mm hubiera quedado muy bien, pero bueno, ahi está.