





Desertcart purchases this item on your behalf and handles shipping, customs, and support to SINGAPORE.
๐ Light smarter, live brighter โ never be left in the dark again!
This IP44-rated electronic dusk-to-dawn photocell sensor automatically controls outdoor lighting by detecting ambient light levels, switching lights on at dusk and off at dawn. Designed for wall mounting with bottom cable entry, it supports up to 10 amps and 230 volts, ensuring energy efficiency and weatherproof durability. Backed by a 2-year guarantee, itโs a reliable, low-maintenance solution for modern outdoor lighting control.

| ASIN | B08CZV47XD |
| Actuator Type | photocell |
| Best Sellers Rank | 8,206 in Lighting ( See Top 100 in Lighting ) 250 in Outdoor Wall Lights |
| Brand | National Lighting |
| Circuit Type | 1-way |
| Colour | Black Abs Plastic |
| Connectivity Protocol | Wi-Fi |
| Connector Type | Terminal |
| Connector type | Terminal |
| Contact Material | Stainless Steel |
| Contact Type | Normally Open |
| Contact type | Normally Open |
| Control Method | Sensor |
| Control Type | automatic |
| Country Of Origin | China |
| Current Rating | 10 Amps |
| Current rating | 10 Amps |
| Customer Reviews | 4.5 out of 5 stars 276 Reviews |
| International Protection Rating | IP44 |
| Item Dimensions | 30 x 47 x 49 centimetres |
| Item Type Name | Electronic Dusk To Dawn Photocell Sensor Outdoor Weatherproof Light Switch IP44 Rated |
| Item Weight | 0.15 Kilograms |
| Manufacturer | National Lighting |
| Manufacturer Part Number | 86750 |
| Material | ABS plastic |
| Model Number | 86750 |
| Mounting Type | Wall Mount |
| Number of Items | 1 |
| Number of Positions | 2 |
| Operating Voltage | 230 Volts |
| Operating voltage | 230 Volts |
| Operation Mode | Automatic |
| Operation mode | Automatic |
| Specification Met | IP44, CE |
| Switch Type | Basic Electronic Switch |
| Terminal | Through Hole |
| Unit Count | 1.0 count |
| Wattage | 2300 watts |
B**Y
Great replacement for defective photocell.
At least 30% cheaper that the local DIY store and good quality. Fitting was easy and wired up the same as the unit it replaced. No cable gland for the bottom but I reused the old one. Works well.
P**H
It works
To operate your outside lights from dusk to dawn, cant go wrong. Quality is good, easy to install, needs 240Vac Live, Neutral and a switch wire to turn on the lamps. The sensore head is compatable with others of the same design, so if your head has failed, it is a simple twist off / twist on replacement.
F**Y
Works - reasonably well made - I found it fiddly to fit. No cable guard supplied.
Seem a reasonable piece of kit - and works as required. It was (I felt) fiddly to fit (as inevitably up a ladder!). The item does not include a cable guard - although the housing is molded to accept one, and the accompanying leaflet mentions using one. I reused the guard from the unit I removed. The top unit of the sensor 'twists and lifts' off - it fits back in the reverse movement. Will only fit in one orientation. The top unit will only fit if the flat circular plate below it is correctly fitted back on two plastic lugs and the other two holes have screws fully tightened. Don't remove the central screw in the flat circular plate - it holds in the wiring terminal, and you can't wire up the terminal with the unit dismounted. The 3 screws at the bottom of the Wiring terminal - that hold in the bared ends of the mains cable - tighten up by screwing anticlockwise - Lord knows why!! As the leaflet suggests make a careful note of how the wiring went into the terminals on the unit you are updating. The terminal connectors are marked (L1, N and L0) in slightly raised letters in the black plastic on the base of the Wiring Terminal. Later addition - The sensor unit failed after 18 months - but a 1 minute job to replace it with a new one (altough of course ยฃ12!)
S**F
Easy replacement
Quick replacement to a similar unit. Did not require replacing the base as the three prongs fit perfectly. Insert and twist that easy.
F**S
Great value 4 money
In my case, it did the job without replacing the base & more cost-effective than other equivalent products from the market
D**D
Fits existing socket
I have a security light illuminating my house number. The sensor had clouded over the years, reducing its efficiency. I sent off for a replacement. Although the sensor comes with a new socket, I was able to fit it into my existing three prong holder without difficulty. It arrived on time, well packed in the usual Amazon box. Very pleased.
T**R
Check the item before installing
Didn't come with bottom cable gland to seal incoming mains cable, had to use the one on the old unit. check the foam seal is sat correctly in position mine wasn't quite correct but ok. QA missed this one but anyway it works ok and I've sorted it. Should of just gone to Screwfix as they sell them
M**E
Easy replacement install
The light sensor stopped working on our outside lights. In closer inspection, I could see that the top could be rotated and came off the main body. This was the same product so just had to insert and twist the new one in place. No need to change the body or re-wire. Perfect.
Trustpilot
2 months ago
1 month ago