AUTOGINE White LED Interior Lights Kit for Toyota RAV4 2016 2017 2018 2019 2020 2021 2022 Super Bright 6000K Interior LED Lights Bulbs Package + Install Tool

Item received was as described, worked perfectly. Great update for the current internal lighting.

Instructions weren’t the greatest, but a couple of YouTube searches later and I have them easily installed. Work wonderfully and illuminate the cabin of my 2016 RAV4 beautifully.

La verdad no creía que hubiera mucha diferencia, los coloque y la verdad me lleve una buena sorpresa. Los recomiendo. Ahora tengo que ver qué duren pero llevo una semana y todo bien

Changing the interior lights makes a world of difference. For the overhead lights drop the whole console. Way easier and you are not going to risk damaging the covers. Panel tabs in front corners between roof lining.

This kit came with enough bulbs for: • Vanity mirror lights • Front overhead Cabin lights • Rear overhead Cabin lights • Rear right side Cargo light With two bulbs to spare (my license plate lights seem to be permanently affixed LEDs, but your mileage may vary. Installation was fairly easy, with the exception being the front overhead Cabin light. To pop this one off, you want to insert the tool on the rear facing side, and once there is a gap big enough, pull down with your fingers. It takes a fair bit of force, and I ended up breaking part of my front right clip (though it was still functional) Once the console is released, it's smooth sailing with two twist lock bulb holders. You could unlock them with the plastic tool, but I was able to do it myself with just my fingers. Be careful not to burn yourself, if the bulbs were on during or before removal. Once completed, use a flashlight to align the FRONT MOST (windshield side) clips with the holes, THEN align the rear side. If you do rear first, the front will not snap in and you will need to pry the rear off again. Both vanity lights come out by inserting the pry tool on the LEFT side of both assemblies. Then you can tip it down, and slide left to fully remove the assembly with an inch or two of wire to move around. Slide right side back over BEFORE snapping back in. Rear overhead cargo was super easy to get out, but a little challenging to align the bulb during reinstall. There are little cutouts on the clear plastic along the edge, use the pry tool to pop it off. Make sure your LEDs point downward, otherwise you won't gain much light from this! Rear cargo was a little wonky; I opted to unplug the harness (push lever with pry tool and it pops right off super easy) so I wouldn't have to be bent over trying to take it apart. It has a few small pieces so be sure not to lose them. You have to release the tabs on the clear piece from the gray housing, once that's done the little switch will come loose and you'll be able to slide the gray bulb holder out of the gray shield. Replace bulb, put switch back in the groove, and once everything is back together, snap the clear plastic back on. Then just plug it back in and you'll be golden. As I said earlier, my license plate appears to have permanently affixed LEDs as I was unable to find a panel to remove that allowed access. Since it's already led, I didn't see a reason to dig deeper. Your mileage may vary. I opted to keep my bulbs in the same bag as my two extra bulbs, in case I ever need them. I'd recommend holding on to them just in case, small bulbs like this are usually relatively expensive and when you need them, you NEED them. I'll try to update my review down the road and keep you posted on how long these last; they seem to be pretty high quality with good solder joints and personally, I don't see them failing any time soon unless I got faulty LEDs. VERY impressed that they dim when the car dims them, I was expecting flickering from voltage drop, but no such thing happened. All in all, I'd recommended this set to a friend given my experience so far. Very impressed with the quality for the price, I feel like you'd spend more at the auto parts store for worse bulbs. Though, only time will tell.

It’s nice and bright and a cool white! I don’t like warm dim white light as my original lights were that but these are nice bright and fit perfectly.