Araca ELPLP88 Replacement Projector Lamp with Housing for Epson EX7240 EX3240 EX9200 VS240 EB-X31 EX5240 TW5350 VS340 VS345 EB-U04 EX5250 H682 H683 /PowerLite 98H 2040 2045 740HD H719A Economical

Kept a housing from previous replacement of Original JVC bulb... Only need to remove 3 of the 4 screws (One is almost inaccessible) to pull out the old bulb.. Take a Close up Photo with your phone before starting as there are a couple of mounting plates that you will have to put back.. Replacement Bulb is a 100% match with wires etc... Brightness is excellent and will be using again once I pass the 2000 hr plus mark.. UPDATE…. Wow…. With 2 previous OEM bulbs I’d never gone from Econo Mode to High Bright mode.. With this I did, hoping to get 1000hrs at bright… DO IT!!! Total trashed getting a Laser projector as my JVC Thx projector is now and has been at high mode and a keeper for years to come … 1100 hrs currently at Bright mode at still jaw dropping picture… Will order couple more for when bulb finally starts to fade… NEVER USING ECONO MODE AGAIN… :-)))

Buen producto

Easy to install back in the projector. Works as good as the original. Thanks Guys

We use an Epson for a confidence monitor at church. The bulb went out and I purchased this one. This bulb is more than sufficient. The colors may not be as bright and bold as an OEM lamp, but this is phenomenal for the price point. We will continue to buy them every time we need one. Same fit as an original lamp.

I took a chance to buy this bare bulb at $95 instead of paying $395 for a factory bulb with full housing included. I still have the factory JVC DLA RS520 housing, and after having read the various reviews and research, I ordered this bare bulb from Araca and waited impatiently through Amazon Prime. I watched a video on YouTube on how to replace the bare bulb. Seems easy enough to save $300. When the bare bulb arrived in two days, I took it out and compare it to the factory Ushio bulb. They looked matched up so I went ahead and unscrew the factory Ushio bare bulb and installed this Araca bare bulb. I wore thin rubber gloves to not touch the bare bulb with my hand oils because the oil will make the bulb heat up irregularly; thus, shorten the life and accuracy of bulb. The install was easy enough. You need a thin Philips screwdriver and patience. But after it was installed in roughly 15 minutes, it didn't seem too tough at all. I then install it to my JVC DILA RS520 using my ladder. Turned on the JVC. Hoping the beloved JVC will turn on safely. And then....pictures!! Yes, bright pictures. It took about two three hours to see the light get really bright like when I first bought the JVC. The original Ushio bulb had roughly 2350 hours. But it was showing its age. This Araca bulb has been more than I had hoped for. It's actually rated 20 more watts than the factory Ushio bulb. I heartily recommend this bare bulb. I installed it on September 16 2020. It is now Oct 3, 2020 and it has worked beautifully. I will continue to replace bare bulbs from now on knowing how easy and simple it is. Especially when the picture shows noticeable degradation in clarity and brightness.

This bulb in $94. A replacement housing costs over $500. I'm a DIY'er so this was an easy decision for me. Sometimes DIY can get messy, but not this time. The advantage of the replacement housing is you simply pull the old housing and insert the new one. Job done. With the bulb, you have to remove the old housing, then using a screwdriver and tweezers, replace the old bulb. A pretty simple task in the DIY world. This bulb takes a minute to warm up. The picture is dim at first, but then is ok. So it's not OEM, but appears to be a solid replacement. I'll know more when I see how long it lasts.

This is the second time I have purchased this bulb as a replacement for my projector. The first time I ordered this the bulb was fantastic and lasted nearly a year. This bulb however didn’t last two months and just stopped working….the product description says guaranteed for 200 days and to contact seller for a replacement…..but there is no contact info provided…now I’m out the money that I paid for this bulb and have to still order another one so my projector will work.

Fits perfectly and works great!

kargo hızlı şekilde ulaştı tarafıma yanlız alınan kargo ve paketleme ücretine bakarsak gelen ürünün hassas olduğu halde hiç bir koruma parçası olmaması kötü oldu sadece ürüne cargo poşeti vardı

Highly recommend, fast delivery product in perfect condition.

I found it very close to the original OEM! Super good quality and very bright, for a quarter of the price of the original! May be a little bit less life span but honestly even at half the lifespan it would be worth it because it’s four times cheaper! Very happy so far

The bulb lasted through ONE presentation. the second time I used it, it would not light. Very disappointed with the bulb!

works great and much cheaper than JVC original bulb.