Tri-Color Front Grille Badge Emblem for Tacoma 4 Runner Tundra Sequoia Rav4 Highlander（Yellow/Orange/Red

I put a drop of loctite on both of the screw pegs (the pieces you screw into the back of the badge plate) just to make sure they didn’t shake loose. Other than that, the hardware it comes with is (so far) adequate for keeping the badge on your vehicle. I check periodically to see if the tension in the doubled-up nuts is letting up, so far it hasn’t budged a hair. Overall great purchase, the badge feels sturdy and doesn’t look cheap at all. Also, a perk of this badge is if it doesn’t fasten properly to your grille (some tacomas don’t have the honeycomb grille like my 4R does) you can put the badge anywhere on your car with some 3M tape, a microfiber towel and some alcohol to clean the area before adhering. Will buy again if it ever gets broken or banged up from road debris. ALSO: easy install tip, if you change your own oil— when you take the skids and valence panels off from under your radiator, you can easily reach up and install the badge. In theory, you just have to remove one plastic clip (which I ended up throwing away anyway) and a half a dozen bolts to do so.

Easy to install and very cool looking. Not chinsy and made of decent quality materials. Have not had it long enough to see if it will fade or not.

I thought I would have to return this, because the gaps on my grill were wide enough that the included backing plates couldn't get enough of a bite to hold the emblem in place. I picked up some mending plates from Lowe's for $3, painted it black, and added one to the backside to allow for more grab. The emblem looks great and adds a pop of color to my nightshade black Sequoia. See pics

I added a little industrial adhesive to the back of the plastic emblem when I assembled it and used 2 nuts to lock it in on the grill. It's hasn't moved and looks good. Slight discoloration but I've had it on almost 2 years.

I was initially concerned due to the thickness of the badging. I was concerned it would be too bulky and stick out too far. For me, ... that's not the case. Looks great and would buy this again ....

Very easy to install. Feels sturdy and secure on the car. Gives the car some style.

All of the badges of this type out there are made for particular kinds of grilles that I don't have and don't care to get. There aren't any that are made to fit this grille (2020 SR style). I wanted to add some personality to my Tacoma and after deciding against decals I thought I'd try one of these badges. Given my grille style, I can't attach the badge the way it's meant to be attached without drilling holes into the grille, so I filed the back of the badge flat, and a local body shop hooked me up with some 3M adhesive tape. As it turns out, the badge is the perfect height for the notch along the top of my grille and I love the way it looks! The front of the badge is pretty glossy, and it got some fine scratches in it while I had it face down for filing (that's my fault for not putting a cloth or something under it), so be aware of that. They aren't noticeable unless you look at it pretty closely. I like a matte look so I may take some very fine grit sandpaper to it to take the gloss off later on. Still, I'm very pleased with it so far.

Does not fit 23 Tacoma sport

looks good quality. havent installed it yet.

満足

見た目は良いですが、劣化のスピードが早いです。 バッチのカラーの色褪せが、1年ほどで発生しました。 赤は特に褪色が早く、すぐに朱色になってしまいます。

Same as oem , quality is good

特に品質が高いわけではなさそうなので、安いので十分かと 特にボルト間を渡して固定するパーツが柔いプラで、確実に固定されない。 ねじ止め剤でも入れたい所