SCOTTCHEN Tabletop Only Whetstone Holder - 304 Stainless Steel Sharpening Stone Base - Adjustable Non-Slip Rubber, Rust-Proof Fits Stones 3-1/8" to 10-1/2"

This whetstone holder works great! I have an assortment of stones with different lengths, widths and thicknesses, and this holds them all up and off my bench or countertop. It holds the flattening diamond plates too. The screws on the rubber block that tighten the block to the rails are fine. You don't need to lock in the stone super tight because sharpening is done with a top-to-bottom, up and down motion, not side to side, so the rubber block is there to prevent sliding up and down and not side to side. I used this jig extensively, sharpening every edge I have, while constantly changing stones to test the holders ability. All stones were secured and the holder is thick enough to get the stones up so you don't scrape knuckles while sharpening but not high enough to make it unstable. I got the smaller holder for countertop and bench use instead of a sink bridge style one. I wanted to be able to take it outside to my garage without it being too long or taking up too much space. I also use this for whetstones and for oil stones and I don't need a sink to sharpen any knife... I'm very happy with this holder. It's much easier than scraping knuckles or dealing with the flimsy silicone bases that comes with some stones. Cleanup is hot water wash and dry, super simple and quick. Whether it's oily schmutz or stone slurry, it washes right off the rubber and rails. If you use sharpening stones, flattening diamond plates, or are uncomfortable banging your knuckles while sharpening, this holder (and I'd imagine the larger ones from this same company) will make sharpening easier, more convenient, and all around more enjoyable. It should last forever and if for some crazy reason it doesn't, I'd buy another one for sure! Happy sharpening everyone!!

The holder that came with my DMT stones was a problem from the beginning. Slipping constantly or not holding the stone. This thing has big slabs of rubber that will grip the smoothest kitchen counter, and the plates or stones won’t move at all.

Works well. Holds my water stone with no movement.

works great. keeps my clothes clean. very happy.

This holder does what it say; however, it does limp from one side; I had to add some support to that side so it stops moving. Other than that, I would suggest it since it's not a huge issue nor I'm removing a star for that.

Purchased for my Spyderco ceramic stone. Money well-spent. Note that ALL stone holders of this design may initially fail to lay flat on the working surface or table. That's because they lack the torsional rigidity that they'd have if the steel rods penetrated steel (rather than rubber) feet. Not to worry... a simply, gentle twist along the longitudinal axis is all it takes so that the holder lays perfectly flat on the working surface :-)

I've got this dialed in to work perfectly with my new Sha-pu sink bridge. I had to do a slight mod by using my Dremel to cut out grooves for the support rods to rest in so it would sit level and make solid contact with the board. The way I have this set up I can use stones up to 9.25" long. I can't wait for my next sharpening session because I know this is going to work like a dream.

I had this whetstone holder for almost a year now and it has not shown even the slightest sign of falling apart. It is well constructed and does its job very well. However, I am docking it a star because the design... makes no sense when you think about it. The securing screw is on the side of the rubber section rather than on the steel pole, so it's less effective in securing a whetstone. The design more-so secures the rubber section onto the steel pole--rather than tightening the rubber section so that it "compresses" the whetstone against the other rubber section. Again, the product is well-constructed, but the design is flawed; not substantially flawed, but flawed enough where the design opens up more room for user error.

El porta piedra de acentar o piedra de afilado de agua es bueno y esta bien armado, ademas que ocupa materiales de buena calidad.