Leveling Lift Kits Compatible with 2004-2020 F150, 3 inch Front+2 inch Rear Strut Spacers Leveling Kit for F150 2WD 4WD

Installed on 2012 Lincoln Navigator L. Relatively simple to install if you're handy with tools - lots of YouTube videos cover the process. I had both sides done and re-installed (including touching up the black chassis paint) in about 2 hours on a hoist. I read other reviews about the truck riding "harsh", and bits of the frame contacting suspension components - not sure how they arrived at those conclusions, but in my application I experienced none of that. In fact, the truck drives significantly better than it did before. The front end feels more firmly "planted", and there is much less "wallowing" than the original suspension. The finished ride height is exactly 2" above stock, and the truck sits essentially level. After completing the install I went ahead and ordered adjustable rear linkages for the air struts to raise the rear end about 3/4" - it looks good the way it is, though I'd like the rear end just a little bit higher. The 1.5" lift kit is the perfect adjustment if you're trying to take the rake out of the stance on the Expedition/Navigator. Highly satisfied for the price. Moving up to a 285/55/R20 tire.

After installing these spacers, my suspension felt harsh and the upper control arms nearly contacted the coil springs with the suspension fully extended. it was also difficult to get the strut assembly, with the spacer, installed back into the truck. I wasn't happy with them so I removed them and cut them down to about 1.1" thick on a lathe ( i felt that cutting them thinner would jeopardize strength or I would have gone to one inch thick). After re-installing the modified spacers, the suspension feels much more like the original configuration and clearances are better and they are easier to install. Truck looks more level now instead of the front end being noticeably higher than the rear.

Bought these to replace a set of blocks that crushed on my truck. The thickness and quality of these lift blocks was so much better than my old blocks. Angle puts my rear driveshaft in a perfect position to reduce stress on the u-bolts. Highly recommend these for your truck!

I put these rear blocks on to compensate for the 2.75" Eiback pro truck kit (w/eibach springs) on my 2019 ford f150 FX4. The hardware is beefy. The threads on the bolts will need to be cut off if you want to give yourself 1 or 2 inches more clearance under the rear axle.

These are definitely worth the money, extremely easy to install and were a perfect fit to my truck. Lifted it a full 3" so now the back of my truck measures 41 3/4, my front 41 1/2.

The leveling kit was very easy to install. The quality is good. I am satisfied with this product and would recommend it to someone.

excellent

Did the trick but hard to start the bolts down into them. Studs would have been easier

Easy to install