UCS SprayMax 2K Glamour High Gloss Aerosol Clear

Very good quality but pricy

Petrol stains are visible on my bullet tank. Wasted my 3700 bucks. Disappointed after someone told that it is resistant to fuel spills.

good product , very stable finish

Oh, this spray works really well for giving a nice shiny finish to my car. I used it at work after doing some touch-ups and it dried smoothly with a good high gloss look. The UV and scratch resistance are definitely handy. Plus, it feels pretty professional for an 11.8 oz can. 🌟 Happy with how easy it was to apply and how long it seems to last. Would buy again for sure!

Was great clear coat. Spray painted the roof of my car. Good wide spray and 2k. I applied it too light and had orange peel. just apply thicker layers. Works great

El envío llegó un día antes de lo estimado y el producto por si sólo es garantía aunque un poco caro por la naturaleza del mismo, ya que es normalmente vendido en E.U. Se usara en el ramo automotriz. Ya probado previamente. Muy recomendable tanto el vendedor como el producto.

This clear coat is the best clear coat for headlight restoration. It is very forgiving but DO NOT OVER APPLY AS IT WILL RUN. For best result shake the can for 2 minutes and then pop the bleeder and shake it again to mix the 2k in. (If your doing headlights you will want to do 2 to 4 coats. 5-10 minutes between each coat depending on humidity. I did it in my laundry room which is very dry I waited 10 minutes between each coat and it looks amazing. Coat number 1 is super light just enough for the paint to bond and adhere to the headlight. Coat 2 a little bit heavier For the last coat no matter if it’s 3 or 4 that one has to be the heaviest without running. This clear coat is amazing and with proper prep it makes the headlights look like new. Only one problem but you can’t blame the paint for it, the paint only lasts about 24 hours once the bleeders popped they say up to 48 hours if kept refrigerated. 24 hours is the longest I’d say the paint is good after that you’re pushing your luck. I’d say with 2-3 coats you could probably do 4-6 headlights depending on how heavy your going. Here’s the sanding steps I used it’s a lot but these sand paper steps are the best results I’ve gotten. 3M (sand paper only) P320 (50 percent faster sanding) (only needed if the factory clear is holding on, wipe with iso after each sand to see if you’ve missed anything) P600 (start here if the clear is all gone and the headlight is yellow) P800 (refine 600 grit scratches) P1000 (refine 800 grit scratches) P1500 (refine 1000 grit scratches for a super smooth surface to the touch) P2000 (refine the 1500 grit scratches for a super smooth not super orange peely finish) I 100% would recommend this product as I have now purchased it 3 or 4 times. It’s great because when you restore headlights on a vehicle it completely changes the look of the car. 5 out of 5 could not be more pleased. P.S this paint self levels and gets better looking with time (after about 12 hours your safe to touch it but I wouldn’t reinstall them until about the 24 to 36 hour mark.