48A26 PTO Overrunning Coupler for 1-3/8"-6 Spline Shaft Up to 75 HP

Work good

Your product needs better quality control. Even after removing material, it is still oversized. I can continue modifying this to make it work, but I shouldn't have to. When you advertise a product to be a certain size, there is an acceptable tolerance that that has to be met. When it is so grossly oversized, that additional machining is necessary, you've done something wrong. I have already purchased a new product locally and it fit immediately with no modification whatsoever.When your manufacturing process has failed, it is the responsibility of your customer service to handle it. But that seems to be just as flawed.

Makes a tractor without live PTO a lot safer. Easy to install. pTO shaft had to be cut about 3” shorter.

I need an overrun clutch in order to run a brush hog on the back of my Kubota l1500 and this did just the job

I wish you would include an instruction sheet showing where the roll pin goes to lock it on to the tractor PTO shaft.

The PTO overrunning coupler is a good product, but has some serious issues that require attention. As received the item does not work, but can be corrected. To start with, the roll pin (5/16" x 2") was missing from the package. The biggest problem is the holes for the roll pin are not aligned, so the pin cannot be installed without corrective action (disassemble and drilling, milling, or filing).

The media could not be loaded.  I purchased this for my Ford 601 workmaster. The fitment isn't that great and it adds stress to the roll pin used to secure it onto the pto shaft. Eventually this caused the roll pin to shear and my pto shaft to come loose while spinning at ~540 rpm damaging my shaft, my tractor, and nearly injuring me.The output shaft on the tractor was inspected and measured with no wear.This is the correct size 1 3/8 6 spline... not to be mistaken with a very similar and often mistaken 1 1/8" pto size

Great quality, fast shipping and reasonable price.