BONTEC TV Wall Mount Tilting, 23-60 inch TVs, Max VESA 400x400mm

"Fantastic Mount – Slim, Sturdy, and Easy to Install!" As someone who recently upgraded their living room setup, I was on the hunt for a TV wall mount that was both low-profile and reliable. The BONTEC Low Profile Tilt TV Wall Mount for 23-60 inch TVs absolutely delivered! First off, the "ultra-slim" claim is no joke. My 55-inch OLED now sits incredibly close to the wall, giving it that sleek, modern, almost picture-frame look I was going for. It really makes the TV blend seamlessly into the room rather than sticking out like a sore thumb. Installation was surprisingly straightforward, even for a DIY novice like myself. All the necessary hardware was included, and the instructions were clear enough to follow without too much head-scratching. I particularly appreciated that it's designed to fit 16" studs, which is a common spacing and made finding a secure mounting point a breeze. The tilt feature is also a huge bonus, allowing me to easily adjust the viewing angle to eliminate glare from windows or lights – a small detail that makes a big difference in comfort. With a loading capacity of 99LBS and support for VESA up to 400x400mm, I felt completely confident hanging my fairly hefty TV. The build quality feels very solid and secure; there's no wobbling or creaking whatsoever. If you're looking for a low-profile, tilting TV mount that's easy to install and feels incredibly robust, I can't recommend the BONTEC highly enough. It's a fantastic value for the quality and convenience it provides.

Easy install, make sure it fits your tv mounting holes... Has a bit more tilt than most... Was great! Decent build and hardware.... Mounted a 50" vizio.... No complaints!

For $16-$17 I was super duper skeptical. But nothing a simple return can’t fix. Upon arrival, I could already tell I made the right choice. Well built, and not over engineered. Just tilts forward and back which is more than I need. Installing would have been a breeze with two people but doable all alone depending on tv size. Believe it or not I put this 60in tv up myself. I was surprised as well lol. Tired, but worth it. Would recommend, especially at the price point.

It looks pretty good easy to install on my wall and put on my tv the only thing is they didn’t have thick enough screws for a Samsung tg but I worked it out with the long screws they gave me which were too long but either way it’s pretty sturdy and easy to clip on to the wall mount . You can make it lean by adjusting it which is pretty easy and sturdy as well. You can also move it side to side a little if you don’t have the mount exactly in the middle. Overall great purchase.

This mount was so easy to install and it holds my TV with no problem. I had to adjust it a couple of times to get the right angle and it moved easily. Even when dusting, it doesn't wobble. This is a huge relief for an older person like me. No worries about catching it if it falls. I recommend it to any hardware challenged person.

The wall plate is designed to span two studs. Unless you have 8 inch or lower stud spacing it can't be centered on a stud. For standard 16 in stud spacing, it must be centered between two studs (for wider stud spacing it doesn't work). If you are picky about the wall position of the TV and wanted it centered near a stud, buy a different wall mount. With 400mm wide VESA the TV must be centered within 0.75 in of the center of the wall plate. Narrower VESA gives you more range to mount the TV off center on the wall plate, up to 4.7 inches to either side for 200mm and 6.6 in for 100mm. But you might want up to 8 inches off center before a different pair of studs would work better and you can't get that much with this wall mount. The L and R marked on the vertical pieces are from your viewpoint as you attach them to the back of the monitor (not from the completed orientation looking at the front of the monitor). A pair of pictures in the instructions makes that clear. If you have 400mm wide VESA, you must get L vs. R correct or it won't work at all. Several of the bad reviews say it doesn't work with 400mm VESA, one of which (saying it was done by a professional installer) shows it not working and clearly shows the L vs R pieces are reversed. My photo of this product attached to the back of my 50 inch TV with 400mm wide VESA shows it working well with L, R pieces correct. It also works for 400mm high VESA, but I don't have a photo of that. For narrower VESA, I don't think it is important to get L vs. R correct (unless you need the full flexibility for off center positioning). My photo (top down view) of the verticals attached to my 32 inch monitor shows L vs. R intentionally backward, because I think that works a little better for this monitor's recessed 75mm VESA mount. If you have power or display cord sticking straight back (as you see in my photo of my 32 inch monitor) that may be a problem. The cords as shown do not work. The monitor mounts slightly too close to the wall. I had a spare right angle power cord and I bought a right angle DPMI adapter, that would fix this problem. But for other reasons, I wanted this monitor an inch further from the wall and kludged standoffs between the monitor and the vertical pieces. For most monitors, the provided standoffs (much less than an inch) might add just enough for rear facing cords to work. But for most monitors you would need to buy longer screws for the standoffs to work. (Of course most TVs don't have this issue at all because the plugs are built sideways and only need standoffs if the back is curved). The provided standoffs don't work at all with the strange recessed 75mm VESA of my monitor. If you have a monitor smaller than 32 in, or you have 75mm high VESA mount, the vertical pieces will protrude as seen in the photo of the top of my 32 in monitor (75mm VESA). I wouldn't mind that because it is part of a bank of monitors that hide each other's mounting. But for a normal TV, this is likely a bad choice of wall mount for under 32 in and/or 75mm VESA. For 100mm to 300mm VESA on a 32 in or bigger TV there is enough flexibility in how you attach the verticals to the TV to hide them. For 400mm VESA, the verticals couldn't protrude even if you wanted them to. The wall mount screws look like you could use either philips or 10mm hex drive to tighten them. But, as mentioned in a few of the bad reviews, the screws are not high enough quality for the philips to work. The head will strip. The screws are plenty for holding a 50Lb TV on the wall (I'm not sure about the 99Lbs advertised). But you should use a 10mm hex drive, not a philips screw driver. Having put up a large number of similar devices, I would always use hex drive anyway (buying different screws if the ones provided were not hex drive). If you don't have a good stud finder and a ratchet set including 10mm, maybe this is not a product for you. (You still use a philips screw driver to attach the vertical pieces to the TV).

Great product

Solid, as advertised. No issues, fits multiple tv sizes, easy install

Support TV conforme à la description, assez discret une fois installé et plutôt facile à monter. Le système d’inclinaison est pratique et l’ensemble paraît solide. Petit conseil pour les non habitués : mieux vaut poser l’écran au sol, fixer les supports au dos, puis prendre les mesures avant de percer le mur. Cela évite les erreurs de positionnement. Bon produit, simple et efficace. PS : ne pas se fier au niveau bulle fourni...

Top

Ich habe diese BONTEC TV-Wandhalterung für meinen Fernseher gekauft und bin sehr zufrieden. Die Montage war dank der mitgelieferten Anleitung und des Zubehörs unkompliziert. Die Halterung macht einen sehr stabilen und hochwertigen Eindruck und trägt den Fernseher absolut sicher. Besonders gefällt mir das ultraschlanke Design. Der Fernseher hängt sehr nah an der Wand, was optisch modern und aufgeräumt aussieht. Die Neigefunktion ist praktisch, um Spiegelungen zu reduzieren und den optimalen Blickwinkel einzustellen. Für den günstigen Preis erhält man eine robuste, zuverlässige und leicht zu montierende TV-Halterung. Wer eine einfache Wandhalterung ohne Schwenkfunktion sucht, macht hier definitiv nichts falsch. Würde ich jederzeit wieder kaufen! 👍

I purchased this BONTEC low-profile tilt TV wall mount for my 43-inch TV, and it exceeded my expectations. The bracket feels solid and well-made, and all the necessary hardware was included. The instructions were easy to follow, and installation was straightforward. I like how close the TV sits to the wall, giving it a clean, modern look, while the tilt feature helps reduce glare and improves the viewing angle. Once mounted, the TV felt very secure and stable. Overall, this is an excellent value for the price. I would definitely recommend it to anyone looking for a sturdy, easy-to-install TV wall mount.

Me parece una muy buena opción a un precio muy competitivo. He colocado mi televisor de 55 y es perfecta. Fácil de instalar y buena movilidad para el televisor. Trae un pequeño nivel para asegurar una posición perfecta, un acierto.