Made in The USA, Eagle Tool US EA50036 Installer Drill Bit, Auger Style, 1/2-Inch by 36-Inch, 3/16-Inch Shank

The Eagle Tool US EA50054 Installer Drill Bit is a testament to quality craftsmanship and thoughtful design. From its sturdy construction to its precision performance, this drill bit delivers on all fronts. However, its true value may be best realized by those who have occasional drilling needs. Let's start with the positives. The build quality of this drill bit is impressive, with durable materials that withstand the rigors of drilling into various surfaces. The spiral design ensures smooth and efficient drilling, while the flexible shaft adds versatility, allowing for access to tight spaces and awkward angles. Furthermore, the compatibility with impact drivers and quick-change systems enhances the overall user experience, making drilling tasks quick and hassle-free. Whether you're a professional installer or a DIY enthusiast, you can rely on this drill bit to get the job done with precision and ease. That being said, the true beauty of the Eagle Tool US EA50054 lies in its versatility and reliability for occasional use. While it may not see daily action in your toolbox, having this drill bit on hand for those occasional drilling tasks can be a game-changer. From hanging shelves to mounting fixtures, it's the tool you'll be glad you have when the need arises. In conclusion, the Eagle Tool US EA50054 Installer Drill Bit is a quality tool that excels in performance and reliability. While it may not be the most frequently used item in your toolkit, its versatility and precision make it a valuable addition for occasional drilling needs. Four stars for its exceptional quality and usefulness in the right circumstances.

I used this bit to drill six 1" holes through a 30" diameter Red Oak tree to cable it off as a result of storm damage. I was skeptical at first seeing the bit when it arrived. I thought for sure it would twist off half way through the tree. But after using it, and taking my time with each hole being sure to clean out the shavings with each few inches of progress while drilling, it worked great! A testimony to the "Made in America" logo. I got all six holes drilled, saved the 100+ year old Oak tree, and the bill is still good for the next job. Well done Eagle Tool US! My story would not have had a successful ending had I bought the "Made in China" garbage at Home Depo or Lowes'.

I added an external duplex wall outlet. Power for it was taken from an existing interior GFCI outlet. The 1/2" x 36 inch long drill bit was exactly what I needed to get the job done. The 12/2 UF-B cable had to go from the interior outlet, down through the sub floor and sill (approximately 4.5-inches of wood). This got the 12/2 into the crawl space for easy passage to the exterior wall. While drilling I felt the bit strike a framing nail. But fortunately it wasn't a direct hit. So I was able to get past it without too much trouble. But I suspect the drill bit lost eight of its nine lives from the encounter with the nail. This project would have been more difficult without a long flex bit. No drywall repairs needed, everything was done inside the existing wall and in the crawl space.

Used this to run a cable down a wall with a firewall that was 5ft from the top of the wall from the attic. I did have to use an endoscope to find the hole that was drilled in order to thread the wiring through the hole.

Very flexible and did the job. Excellent tool for perforating holes in a small in-ground pond liner to turn it into a flower bed instead.

Brought these to drill holes for threading wire through studs to install my recessed ceiling lights. For the most part, it works. Drills through the studs (4x10s), though takes quite a bit of error. The screw teeth at the tip deff help with the grip which is great. I wish the drill bit shank were a bit shorter, cause it gets a bit hard to pull it out should I need to do adjustments. The hole at the back is good for putting your romex in to pull through to the other end. However, do note that the hole drilled is only big enough for a single 14/2 romex wire. Any thicker, and it won't fit. Even for 14/2, you have to pull quite a bit for it to go through. So if you need 14/3 or 12/2 or anything larger, get a large diameter bit.

Very useful tool

I bought this for a project I've been doing at my house, running wires for a home theater system through existing walls. I was planning on using it to drill a few difficult locations. One was through the top plate on my wall, the other was through the joists on the ceiling to push the wire through. Well, for the top plate, the wall was an exterior wall and had insulation in it. I tried to use this to drill up through the plate in the wall, but it just got caught up in the insulation. I was also using a bumper ball and placement tool. So that didn't work, I ended up cutting a hole in the ceiling and drilling down from above. As for drilling through the joists, turns out I didn't need to. I didn't realize I have engineered truss-style joists in my ceiling, so no drilling necessary. So in the end I didn't need this bit. But I will say it is very good quality and not too hard to use from what I've seen, so for that I will give it five stars. I will recommend you get the placement tool if you're using it on existing walls. The placement tool is very useful for getting a vertical hole (and not drilling through your siding). I almost wish I needed this bit for something. Oh well, I will save it for another project.

I bought this because I use a fish bit at work and needed one for home. It is very good quality but the shaft is not flexible as it should be. I bought it to drill at a 90 Deg in walls. It works great as an extension as it is rigid and well made. It’s not a cheap Offshore replica.

I was expecting it to be more flexible but not It just cost to much

Used as needed to fit some extra lights and have a older house. That's means beams and drywall is lower so no empty space. Uses this to get and angle to drill through the beam. Has some bend. But personally would want more of a bend

War bei dem ersten Versuch erstaunt wie gut der Bohrer funktionierte. Aber nachdem ich die zweite Bohrung in KieferVollholz gemacht habe ist der Bohrer direkt abgebrochen. Kann daher leider keine Empfehlung aussprechen.

I thought this would help drill through noggins. It hardly flexes at all so I can’t feed it up the wall through the panel cut out. Very disappointing.