Dorman 926-274 Radiator Mount Bushing Compatible with Select Infiniti/Nissan Models, 2 Pack

Nissan quest 2007 funciona al 100

Good fit. Seems like quality part

⁃ These bushings fit my 2004 Nissan Sentra 1.8S perfectly. ⁃ They are easy to install. On a scale of 1-10 where 1 is easiest and 10 is most difficult, I would rate their installation a 2 or 3. ⁃ The old bushings were worn out, had frayed and/or cracked and were not holding the radiator firmly, causing the radiator to shake more than usual. ⁃ The (old) bushings are held by a metal bracket. To get to the bushings, you use a 10mm socket and get the 2 bolts that hold the bracket together. For the bracket on the passenger side, you don't have to completely remove it. You just need to remove the 2 screws and lift the bracket just enough to pry off the old bushing. ⁃ To install the new bushing in the cavity or 'hole' of the bracket, I pinched the bushing slightly to an elongated/oblong shape for easier installation. ⁃ Once the bushing was in and the bushing grooves were slid into the bracket grooves, then I aligned the bushing opening to the radiator top bushing holder. Once aligned and the radiator supported by the bushing, I tightened the two 10 mm bolts. I had cleaned the bolts with spirit/acetone before installation to remove a bit of rust and then applied a dab of anti-seize on the bolts before tightening them. It was a bit of overkill but I felt that it was important to clean the bolts. ⁃ The driver's side is the same for removal and installation as the passenger side. The bracket actually comes out completely. ⁃ The radiator now is more firmly secured by the bushings and the bushings look and feel like they are of good quality.

Ideal para el Sentra 2001

Fits and secures the radiator