BOSCH TS1007 Table Saw Dado Cutter Insert

Its solid and clicks into place. This may sound obvious but I've used dados for over 50 years ,some a lot sloppier than others. If you're going to dado shelves , drawers , adjustable shelf tracks (which I prefer) etc this is mandatory .

its fits nice in my bosch table saw, and the dado set fits nicely too

Excellent product, is cast metal and not plastic. Fits correct and is easy to install and remove. Excellent quality like all Bosch products. If you have a Bosch table saw you must have this insert. Well worth the money. Highly recommend.

I bought this for my Bosch 4100-09 Worksite 10 Inch Table Saw - To use with my Freud SD-208 8" Dado Set.Usual Bosch quality - Made of heavy gauge metal (no flex whatever) - Fits perfectly - Easy leveling with screws.It comes with a 19/32" wide opening for the Riving Knife (not pictured in Amazon's current product photo) -Which makes for easy use by lowering the RK - Instead of having to remove it.But... BEWARE! As is described - This is a "Dado Insert" - NOT a Zero Clearance Insert. It comes with a dado blade opening: 1-1/16" wide.Since the maximum dado able to be cut with the 4100-09 is 13/16" - Even when using it for a "max" size dado stack -There's a clearance on each side of the dado set of 1/8" - Ergo... Pretty useless for use as Zero Clearance Insert.For dado's thinner than that - Even worse. It works absolutely great for use in cutting tenons/rabbit/lap joints.If you want a Zero Clearance Insert - Spend more $$ - Buy Leecraft Zero Clearance Inserts - And cut your own ZC grooves in them.It also works great for use as a template to make your own ZCI's.Limited, but adequate instructions are provided - Along with a 3/32" wide metal "accessory outer dado washer"... "designed to secure a 1/2" to a maximum 13/16" dado set with the arbor nut in place".When using dado sets on the 4100-09 - The 4100-09's outer blade arbor washer is used as the inner blade washer.Then either the "accessory washer" provided - Or the 4100-09's inner blade washer (for 1/2" or less dados) - Is used between the dado set and the arbor nut.Great for the price - But limited in use a a dado insert.Note: All measurements were taken with digital calipers.

For years I had a Craftman table saw and really liked it, but with a lot of extra work remodeling a new home it died. I shopped around and found this Bosch on Amazon, there was nothing available at local sources. The delivery time was reasonable, the table saw is so much better than I had expected. It is moveable, has wheels, which my old one didn't have, it had to be DRUG, screeching all the way and used in the basement, because it took 3 guys and a truck to move it. This one is easy to move, locks in place, it's very stable. All in all, I am glad the old one died and I couldn't find a new one locally. I am not a professional, but want my tools to work properly. This Bosch table saw is better than expected.

Perfect fit good value

red keeps blade in view

This insert works great. Easy to level and install. Unlike other reviews, the instructions that now come with the insert clearly show how to use the washers so the dado blade is aligned properly.The one issue with a dado stack on the Bosch saw is any stack more than a 5/8" forces the right-most blade off the shoulder of the arbor and onto the threads. The diameter of the arbor at the threads is slightly less than the solid shoulder and causes the dado blade cut slightly deeper.

This dado insert fit my Bosch Model 4000 table saw perfectly. It levelled very easily with the four levelling set screws and snaps into the table very securely. This insert is made of metal and is perfectly straight. Very good quality and great price. Also very fast shipping.Thanks

Se adapta a la perfección y hace mucho más seguro trabajar con la sierra dado aún que se limita a 1/2 y el dado da hasta 19 mandé espesor

Using it with Freud Dial-A-Width Dato set and it works great. Perfect fit on my Bosch table saw.

SI TIENES UNA SIERRA DE MESA BOSCH NO TE PUEDE FALTAR, EXCELENTE

good product, fits my tablesaw