Flash Furniture Kelista High-Back Swivel Office Chair with Adjustable Lumbar Support and Seat Height, Ergonomic Mesh Desk Chair, Black

This is a nice, comfortable chair. I bought two of them. Both assembled very easily. I'm 6'1" (73" or 185cm) tall and I weigh 212 (96.2kg). The chair is comfortable and the head rest is in a good spot. I like that the arms fold up out of the way when I don't need them and are easily lowered into place when I want to kick back a little. Like when I am on the phone. Putting the chair together was very easy. I do have some tips for you though. The best tip I can pass along is "Take your time putting it together." You don't have to assemble the chair in 5 minutes. Taking your time assures you will get it right. Follow the directions. They are easy enough to figure out. I've read where others had real trouble with the screws. They claim it was very hard to get the screws in. The screws are not difficult to put in provided you don't cross-thread them. If the screws start tightening up before the parts are secure, you need to *stop* and back out the screw and try again. The screw should thread in nice and easy until the parts come together. Another reviewer said the bolts look dirty or rusty. The reason it looks like this would be the thread lock they put on the threads of the screws. This material, when heated by the act of tightening the screw, will bond the threads together making it more difficult to come loose on you down the road. You can see this thread locking material in one of my pictures. Last tip on screws, do not crank down the screws when tightening. They do not need to be torqued like head bolts on a top fuel funny car. Get them snug and turn another 1/4 turn if it isn't too tight. You crank down on these and you will strip out the threads or break the nut loose. Be careful especially on the seat where the screws can easily strip the nut out or crack the wood. Think like the strength of a child, not an MMA fighter. :-) Finally, use the box it came in to rest the back on when screwing on the arm assembly. It just makes it so much easier. If you are looking for a decent low-cost swivel chair, you should give this one a try. Thanks.

Assembly - took about 30 minutes to assemble by myself. A second pair of hands would have been nice, but not necessary. Comes with everything you need for assembly, no extra tools required. Comfort - the fabric on the armrests is a little rough on bare skin, but otherwise fine. Seems to have plenty of padding in the seat, but we'll see how that holds up over time. I'm 5'4" and the lumbar support is in just the right spot for me. The seat seems like it could be longer, I feel like I'd be more comfortable if the seat supported more of my legs. Adjustment - This chair only adjusts up and down and swivels from side to side. There is no reclining or adjustment of the seat itself. It does have a headrest that adjusts, but not up and down, only horizontally. The location of the headrest with the angle of the back of the chair actually makes the headrest moot for me, unless I'm basically leaning my head backwards. Overall - for a basic, no frills desk chair this fits the bill, but could be improved with a more useful headrest and a longer seat.

A Herman Miller replacement at 1/10 the price. My last office had Herman Miller chairs, costing $1K each and, while not quite as comfortable or adjustable, this chair offers nearly every "key" option I loved about my Herman Miller for 1/10 the price. PROS: STURDY support for my 6'1" tall, 210-pound frame. COMFORTABLE throughout a 10-16 hour work-day (startup-life). GOOD LUMBAR SUPPORT: The bulging disk in my lower back aches much less after a work-day. HEADREST: Reduces both Neck & Shoulder Tension. Headrests are A Must-Have if you stare at a PC monitor(s) all day. BREATHABLE, COOL, MESH makes warm offices more tolerable. ARMRESTS Fold up and out of the way and include some padding. ASSEMBLY takes 10-15 minutes (should be 10 but it took 5 minutes to find my cordless screwdriver and allen-wrench adapters). CONS (nitpicking): WHEELS: If you have hardwood floors, you May want to replace the included wheels with a quieter, scuff-free, set for $15-$20 on Amazon (order them when you order the chair). ARMRESTS: If you intend to fold the armrests out of the way the following isn't a big deal. The armrests aren't height-adjustable and rest about 1.75" lower than I like (everyone has a preference) which increases shoulder tension if one's shoulders slump down to allow one's forearms to contact the armrests. I plan to remedy this by building some spacers to raise the armrests using 2x4 lumber scraps from other projects.

Received today the chair and the base was broken, I sent it back.

Very easy to assemble. I brought this chair since I have a back pain and it really helps with that

Buon rapporto qualità prezzo, assemblaggio facile, sedia comoda, poggiatesta un po' alto ma accettabile, difficile chiedere di più a questo prezzo. Vedremo se durerà.

Yesterday when i laid back a screw pop out and sound like plastic broken. Really scary moment!!! I dont find any warrante for this either.

Brauchte jetzt dann doch einmal einen Stuhl fürs Home Office , lässt sich einfach zusammenbauen und bequem/stützt gut den Rücken. Zur Langlebigkeit kann ich noch nichts sagen