94698 Quick Click 10 Ft. Hose for Home and Shop Vacuums with Expanded Multi-Brand Power Tool Adapter Set for Dust Collection

This is a great kit for the home owner /Diyer who dosen't have the room or need for a dedicated dust collection system. This is just what I was looking for to turn my shop vac into a dust collector. I have the Ridgid 11 gallon smart cart shop vac and this kit fits and works great with it. I just disconnect the factory ridgid shop vac hose and connect Cen-Tec hose. The fixed connector on one end of the hose fits into the shop vac port perfectly. The other end of the hose has a quick connect fitting that allows you to connect one of the different sized adapters. Now I can use my shop vac as a dust collector for my DeWalt 10" contractor table saw, my 12" miter saw and all my other hand tools that have a dust extraction port. The adaptors are made from a flexible rubber that stretch slightly to allow you to tightly fit them over the port on your tool. I like that the hose is a smaller diameter than my shop vac hose. The smaller diameter produces a very strong suction at the tool end. Plus the inside of the hose is smooth so your debris and dust will not get stuck in the hose like they do on a regular ribbed hose. I am glad I purchased this kit. It works great for my situation.

LONG STORY SHORT: Great dust collection solution for your average, at-home wood shop. I'm a hobbyist and DIYer, so a commercial dust collection system would be major overkill, but this system is wonderful for keeping the dust manageable in my garage/woodshop. The quick clip system and multiple adapters make it super easy to switch from one tool to the next, and keep the power tools runnin. I've got adapters on my DeWALT Miter saw, my battery powered Circular saw, and my batter powered Sander. Just take the vacuum hose from one, and clip it to the next. PROS: -Quick Clip system is awesome, so you're not shoving a rubber connector on to every tool, just unclip, and re-clip into the next one. -Hose connector is designed to allow the hose to spin freely, so the hose isn't twisting as you change angles (most noticeable on the sander) -Long 16 foot hose makes it easy to leave your shop vac relatively in one place, and be able to reach multiple tools. -Air relief valve, and adjustment collar on each adapter. Prevents getting stuck on a tool. -Super easy to connect and disconnect. CONS: -Not really a con, but I wish they had sets that had more adapters for a specific type of tool line. For example, maybe you could get a 16ft hose with a "Dewalt style" adapter set. or "Milwaukee style" adapter set that works with most of their tools. I have a couple adapters that I don't have uses for at the moment. CONCLUSION: Buy it. It's reasonably priced, and REALLY helps cut down on the dust you kick up while working in your garage wood shop. **Shop Vac not included.

I bought this hose and coupler system to help with dust when sanding my kitchen cabinets. It fits a Dewalt orbital sander perfectly and also fit perfectly with my Vac master Beast. If I had to guess, I imagine it was about 80% dust reduction from sanding, which is great for a DIYer. I also realized the extra sizes that they included will fit my regular vacuum hose attachments so now I'll be able to clean my car out with ease because the hose is flexible and easy to maneuver. Happy with the quality so far, it's new though so time will tell. Instructions were not included so I had to reference other review photos but figured it out quickly from there as I was originally trying to connect the wrong side of the hose to the vacuum. Only included this info to help save someone a couple minutes of trouble shooting. Highly recommend this based on functionality, compatibility, and ease of use once connected! Also the couplers click in and out effortlessly once you put them on correctly.

Has become a solution in my workshop for better dust collection and easier switching of tools. Length is perfect to reach from one end of shop to other and fittings fit almost every tool I own. Have encountered some static electricity due to low humidity but other then that hose works perfectly! It also perfectly fits in dust deputy!

I bought a Kreg dust separator for my garage and needed a lightweight, flexible hose to connect it to my sander and saws. This hose came with a variety of attachments for different tools. It's nice and easy to connect and disconnect, making it quick and effortless to switch between different tools.

I should have bought this years ago! Perfect connections to connect my Festool track saw and Domino DF 500 to a Ridgid 2.5" shop vac. The hose goes right into the vacuum port, no need for the OEM hose.

I’ve had this Cen-Tec system for some time now and I’ve had plenty of time to use it. Over all it’s a good product within expectations. The hose itself is a standard ribbed hose. What I would’ve appreciated is to have a cover for it so it doesn’t hook on everything as I use it. I don’t believe this is offered Cen-Tec so I had to improvise my own. There are plenty of adapters to meet the requirements of most tools. However, what is missing is a standard 1.25” hard taper fitting to fit all the standard shop vac accessories. There is an included rubber adapter to fit the internal diameter of the shop vac accessories however, there is no retention so if I try to use it with ac sweeping it other accessory, it simply falls out of the tool. I looked and didn’t even find that they offered this. For this reason, expect to have one hose for tool operations and another for cleaning.

BEST shop vac hose I've ever owned! Adaptors fit my Dewalt circular saw, sanders, Ridgid miter saw, 30' reaches almost all areas of my shop. Wish I had purchased this way back when I first saw it.

excellent

جيد

As Described

Good hose. Flexible and lightweight enough to be easily used with a sander and router. Adapter also fit my miter and jig saws. 20ft may be a little bit long for my small garage shop but who knows. Quick connector on hose work end is easy to use but plastic is thin and looks fragile. I have doubts about its durability if the hose is accidentally dropped. So, I printed king of guard from TPU filament and put it on hose before quick connector. Design you can see on attached image. It is very simple. 2mm wall thickness is enough to pass drop test without contact between quick connector and floor.

It's a bit pricy but you get a lot for your money. I have it on a few tools now and still have some spare connections left for any future tool I want to add.