Rain-X WeatherBeater Conventional Windshield Wiper Blade

I purchased the Rain-X WeatherBeater 26” and 16” windshield wiper blade set to replace the factory blades on my vehicle, and installation was straightforward. The included adapters made it easy to get a secure fit, and I had both blades installed in just a few minutes. After several weeks of use, they’ve performed well in both light rain and heavier downpours. The blades make consistent contact across the windshield, leaving very few streaks and improving visibility significantly compared to my old worn-out wipers. They are also relatively quiet, with no noticeable chattering or skipping. One thing I appreciate is the value for the price. While these may not have all the features of premium beam-style blades, they provide reliable performance at a much more affordable cost. Durability remains to be seen over the long term, but so far they have held up well through changing weather conditions. Overall, if you’re looking for a dependable replacement wiper blade set that installs easily and performs as expected, the Rain-X WeatherBeater blades are a solid choice. I’d purchase them again.

Rain-X wipers work better than most other brands. Doesn't seem to streak, but of course they are new.

Excellent having the two proper lengths, 16" and 26" for a 2020 Kia Forte in a boxed set. They are SO easy to replace, too. Just pinch in the retaining tab, to get the little bar out of the wiper arm's little rectangular slot, pull old blade free of the arm's U-bend. New blade just snaps right in.

Ok been a awhile since I bought these and that is why I was waiting to write a review. Came on time as advertised and are still working great. They are aided however if you sue the rain-x windshield washer fluid. I think it adds to their life span. They made it through our long New England winter and now the heat of our summer. Great price and good buy.

I have used these blades many times. They perform very well and last a long time. I've removed a star because the j-hook plastic bracket doesn't work on our 22 Kia Telluride. It's a longer piece and doesn't "click into place". In fact, I see nowhere on the bracket that would create a click, lock it into place, or a functional release. The wipers are unsecured on the arms and will come off. I have tried pushing the brackets onto the arms without the blades and there's no way possible to make them secure into place. I used the shorter j-hook brackets from my old blades to make them work.

Fit was of course perfect. I've had this brand before and they last. Replaced a no-name Chinese brand where the rubber actually separated from the wiper base and flew off my car while in use. I'll stick with name brands from now on.

Have used this brand of wiper blades for years. They just work! Easy to install in a few minutes. They wipe clean with no streaking. They also renew my Rain-X coating.

Disappointing. I don't really have a ton of brand loyalty when it comes to windshield wipers. Usually buy based on convenience and pricing across three vehicles in our house. I've bought Rain-X wipers in the past and they've been fine. But this set - for a 2022 Hyundai Palisade - is awful. Immediate streaking in the first rain after install. Thought maybe they just needed some time, but no improvement after ~1 month of use. I even applied Rain-X (the product) to the windshield to see if it'd help, but it didn't. Noise level is fine, install was straight forward, but performance is subpar, to say the least. But again, in the past for other vehicles, Rain-x has been great, so going with a 3 star review. Maybe for this size they're different, or maybe they've changed the product slightly. Either way, won't buy them again.

Buying these "wiper blades" was the first time I've replaced blades on a modern car with this particular system of blade design. On my earlier cars it was just a long thin strip of rubber that (sometimes with two thin strips of steel support down each side) that one would reply. I was suspicious at the whole idea of needing to reply a the entire metal blade holder just to get new wipers. In my ignorance I ordered these new Rain-X "blades". I'm happy with the new blades, in that they perfectly, no noice, perfectly remove the water, etc. I can't comment on the longevity, as I've only had them on a few days. BUT HERE'S THE CATCH. This is daylight robbery. It's a huge waste of money and resources. How on Earth did the automotive industry get away with making car owners replace the entire blade holder (which is very solidly made out of steal), which is perfectly fine, just to get a tiny little strip of new rubber? It's the equivalent of having to change the entire wheel (hub and all) every time you need a new tire. That would never be acceptable. After cringing at the fact I was now the owner of wasteful and expensive wiper blade arms / holders that have little purpose except to go into landfill, I did some digging around. Yes, thankfully, It is possible to buy just the rubber (or silicone) strip, and install it into an existing blade arm / holder. One option I see here on Amazon goes for around AU$22 for 4 (https://amzn.to/460FYe6). They are referred to as "wiper REFILLS". Failing to put "refill" into the search will likely result in only seeing expensive full blade and blade holder replacements like this product from Rain-X. Welcome to the world of car part scams and cons, for the ignorant (as I was).

These wipers have an adapter that fits the bayonette style straight arm of vintage and classic cars. Also fits modern cars j hook. Perfect for any usage and great in the rains

Execelente producto

are not cleaning properly

سهولة التركيب والسعر الجيد .