We remain fully operational. Our teams are working around the clock to ensure your deliveries continue safely.
DOWNLOAD THE APP
Customer Services
Copyright © 2025 Desertcart Holdings Limited
DOWNLOAD THE APP
USBasp USB-ISP-Programmer for ATMEL AVR and ArduinoThe USBasp is an USB in-circuit Programmer for Atmel AVR Microcontroller. It is supported by Arduino IDE, AVRDUDE and many more.This device is shipped with a 10-pin flat cable with connectors.Specification:Built-in Microcontroller: ATMEL ATmega8 Output Voltage: 3.3 V or 5.0 V, selectable via JumperInterfaces: USB, ISP (10-pin)Support for Operating Systems: Linux, Mac OS and Windows. Review: Works - Works. Need to install driver using ZADIG (zadig.akeo.ie/). I had to use the 'libusbK (v3.1.0.0)' driver to work on Windows 11. Review: Works well once fixed - First time I plugged it in my Mac reported a USB error and shutdown all my USB ports! After some time with a magnifying glass I found a tiny solder bridge between 5V and Ground. After breaking that and checking all the other soldering (everything else was OK) it then worked. It is my go to programmer for working with various ATmega based boards at both 3.3V and 5V. But if you buy one you'd better check out all the soldering! I also added a header to JP3 which can be jumpered to program super slow - only needed when programming blank ATmega's and then only if you can't slow down programming in software (e.g. avrdude -B3 ...)
| ASIN | B07Y3B8H91 |
| Best Sellers Rank | 62,341 in Business, Industry & Science ( See Top 100 in Business, Industry & Science ) 249 in Microcontrollers |
| Guaranteed software updates until | unknown |
| Item model number | 26-2 |
| Manufacturer | Paradisetronic.com |
| Package Dimensions | 11.3 x 7.6 x 1.8 cm; 20 g |
B**B
Works
Works. Need to install driver using ZADIG (zadig.akeo.ie/). I had to use the 'libusbK (v3.1.0.0)' driver to work on Windows 11.
L**N
Works well once fixed
First time I plugged it in my Mac reported a USB error and shutdown all my USB ports! After some time with a magnifying glass I found a tiny solder bridge between 5V and Ground. After breaking that and checking all the other soldering (everything else was OK) it then worked. It is my go to programmer for working with various ATmega based boards at both 3.3V and 5V. But if you buy one you'd better check out all the soldering! I also added a header to JP3 which can be jumpered to program super slow - only needed when programming blank ATmega's and then only if you can't slow down programming in software (e.g. avrdude -B3 ...)
A**R
Does not work.
This isn't compatible with Atmel and is not "USBASP". The USBASP driver does not recognise the device. When plugged into a Linux machine, no USB port comes up. Complete waste of time and money. Apparently, it is compatible with some Chinese GUI tool...
C**A
Lo he usado para actualizar Openevse.
N**S
Bought this a week ago to update a Befaco Muxlicer module and got it after less than a week. Well packed and working. Since I'm not a programming wiz a ran into some minor problems without knowing how to proceed. This Saturday evening I just sent a question via messenger to paradisetronic and got a direct response and help. I have now uploaded the code and everything works. Thank you so much whomever was on the other side! Saved my day!
F**E
top ! est reconnu sans probleme par avrdude en tant que usbasp, au contraire des clones chinois dont il faut flasher le firmware
O**.
Works great also in Linux; recommended; programming ATTINY24A chip with this programmer via Linux using AVRDUDESS GUI (avrdude) was possible and without any issues.
D**I
Acquistato questo programmatore per aggiornare il bootloader del mio arduino micro che era corrotto ed è stato molto facile.In pochi passaggi sono riuscito a riprogrammarlo.Mancano le istruzioni, pero si possono trovare sul sito del produttore.Poi su Youtube si trovano tanti tutorial di come si utilizza.
Trustpilot
2 weeks ago
1 week ago