LCD Controller Board:

Board Work for 50Pin Mipi LCD Screen

Input Power Adapter: 5Vdc More than 1A.

Come In Standby Model When Not Input Signal

Standby Model <0.3W

Audio Input:

Apply to：PC i

Board Size: 65mm x 64mm x 3mm

5.5" LS055R1SX04 1440X2560 LCD Screen:

Display New Mode2, Normally Black, Transmissive

Resolution 1440RGB)×2560

Outline Size 70.94 ×128.49×1.45(H×V×D)

Display Area 68.04× 120.96 (H×V)

Brightness 450 cd/m² (Typ.)

Contrast Ratio 1300:1 (Typ.) (TM)

Viewing Angle 80/80/80/80 (Typ.)(CR≥10) [Left / Right / Up / Down]

Signal Interface MIPI (2 ch, 4 data lanes) , 50 pins , Connector

Backlight WLED

Input Voltage 1.8/5.75/-5.75V (Typ.)(IOVCC/VSP/VSN)

Instuction:

1. When signal is not accept. It shows black Image and LED flashing on main board. Please change source for test.

2. When accept. It shows correct image and LED is blue.

This Board work with PC. The image not support Scaling. It shows image depend on input source.

Turn On：

a、Connect Converter Board With LCD Screen Interface

b、Connect Converter Board With 60Pin Cable

c、Connect Main Board With 60Pin Cable

d、Insert USB Cable

e、Turn On 5Vdc or USB as Power Supply

Turn Off：

a、Turn Off 5Vdc or Remove USB Power Adapter

b、Remove Cable

c、Disconnect Main Board With 60Pin Cable

d、Disconnect Converter Board With 60Pin Cable

e、Disconnect 60Pin Cable With LCD Screen

For PC:

1. Most of MIPI screen for vertical display. Need to adjust computer graphics mode.

2. Replication Mode - Extended mode - Vertical and Horizontal adjustment.

1. The Main Board Four Locating Holes

VSDISPLAY for 3D Printer Replacement Display,5.5 Inch LS055R1SX04 1440X2560 2K IPS LCD Screen with to Mipi LCD Controller Board