JACKYLED 20Packs L Shape 4-Pin LED Connectors with 22Pcs Clips 10mm for Strip Lights - 10mm 4pin

I bought 2 strips of LED lights for our TVs and I really wish I had known about these before I set up the first. Included in photos is how the first is set up with bulging wiring at the corners that is noticeable as it starts to peel throughout the day. The other is our other TV that I did after researching a bit and ordering these. They are easy to use. I do have experience with wiring but not with small electronic flexible circuits and these were straight forward and simple. Even with the offset 3 pin 10mm Monster uses, using a 4 pin 10mm allowed contact with a blank space and they work flawlessly. No issues with colors. I do wish they came in black to blend in with things like tvs but if you hide them well you can't even see them from the front. Excellent and helpful for running led wiring around odd bends as they do have a little flex themselves but remain flat. Will definitely be giving our other tv the 90° treatment soon.

I don't write too many reviews, but I'm pleased with this little pack of LED angle strips. I bought the same item from a different brand and had to send them back since the pins needed to be lifted with a paperclip just to wedge the strip lights in, and it still didn't work. These do! A few things to note, though: -My set came with instructions for a completely different item (hanging lamp cord socket?), which I found amusing because I know how to use these. You may not find it so amusing. -They don't come pre-installed. A bunch of the little plastic pieces and angle strips had spilled out all over the amazon bag. No worries. Install is easy. Just slide your fingernail under the plastic latch to open and reveal 4 pins. You'll then slide the tape light under those pins. Use a magnifying glass if you have trouble seeing the plastic grooves that you slide the LED tape light under if you need, and it may help to remove the adhesive backing on the strip light first. Be sure to align your tape light RGB+Volt with the correct ones on the strip. Then close the latch and repeat until you have installed the tape angles into one side of the plastic latch and the tape light strip on the other to make the angles. Hope that helps. Anyway, I'm so relieved I've found something that works! Would definitely buy again.

Great design that fixes those issues when trying to make a 90 degree turn with your LED strip. I had extension strips that I could have used but that would have left a lot of dead space so I'm happy to have found these. The only reason I cannot give these a five star rating is because I feel that for the price, I should either receive more sets or pay less for the current packages. Overall they function great and as expected. What I used them for: I used a cheap LED strip for my living room television and these as corner pieces to make an "n" shape around the television. After I connected everything and turned it on, all the lights came on, but the light closest to the connector piece is a completely different color from the actual color that is set from the strip controller. I will say it was most likely due to the low quality strips I used as they worked fine with my other, better LED strips but I think it was neat and maybe someone can clarify how that even happens. The color on the strip is set to a bright pink and the first LED on the strip after the connector piece is blue. I'll try and update with pictures if anyone is interested about this as well and hope this review helped you if you were on the fence about getting these. I would recommend them hands down!

I picked these up because they were part of the "frequently bought together" info on Amazon. Lo and behold, they did not work at all with the "bought together" LEDs I bought. Not the fault of these, the fault of Amazon and poor sellers. One I finally found a set of lights that were actually cuttable and linkable, I was able to use these with ease and they worked like a charm. They allowed me to create a "u" shape out of LED strips for my bookcase. My frustration was never with these connectors, but with finding LED strips that actually could be used with them. For those looking for the same, I finally had success with Lepro LED strips. Would be nice if JACKEYLED had ones that worked, but I couldn't find any. Overall, with the right strips, they work perfectly.

Works but had no directions and did not align properly with the size of the light strips. It actually is a bit bigger and you have to adjust the prongs to fit the strip

Looks good but haven’t tested them yet will add more details once installed

I recently purchased the JACKYLED L Shape 4-Pin LED Connectors 10-Pack with 22Pcs Clips 10mm for Strip Lights, and I must say, I was thoroughly disappointed with the product. Firstly, the quality of these connectors is subpar at best. Upon receiving them, I immediately noticed flimsy construction and cheap materials. The connectors felt fragile and easily breakable, which is a huge concern considering they're meant to secure and maintain connections for strip lights. The design of these connectors is also a significant issue. They are cumbersome to work with and don't provide a secure connection for the strip lights. The clips included in the pack are not sturdy enough to hold the strips in place, leading to constant disconnections and interruptions in the lighting system. Furthermore, the 4-pin design seems flawed, as it often resulted in poor connectivity. I experienced frequent flickering or complete failure of the lights due to inconsistent contact between the strips and connectors. To add to the frustration, the package lacked clear instructions, making it challenging for even someone with experience in LED installations to figure out the proper way to use these connectors effectively. Considering the price point, the quality and functionality of these connectors are far below acceptable standards. I expected a reliable solution for connecting LED strip lights, but JACKYLED's product failed miserably in delivering that. Overall, I would strongly advise against purchasing the JACKYLED L Shape 4-Pin LED Connectors 10-Pack with 22Pcs Clips 10mm for Strip Lights. They are a waste of money and effort, offering poor quality, unreliable connections, and a frustrating installation experience.

Great fit and connection to the lighting. Easy to install and stay in place.

ممتاز

Maltrataron mis led

I paid for 22 clips and 20 LED connectors but only 13 were delivered. Not honest.

good

Awesome cheap and does the job