CrystaLac Brite Tone High Solids Polyurethane Instrument Finish 32 oz Quart (Clear Gloss)

100% pleased. Not overly viscous, no odor and water clean up- what’s not to like? It is a rather pale murky color in the container, really makes you question whether it will be clear once dry. Dried clear and hard. If you’re wanting a shiny professional finish this product will not disappoint. If you’re wanting a thick finish like traditional epoxy you’ll need to apply several coats. IMO this does not make it undesirable considering all the benefits it offers. Dries fast so if you were to bump the piece soon after applying it’s likely you will not ruin the finish. To apply additional coats follow directions. I make items from polymer clay. Polymer clay is notorious for interacting with adhesives and coatings then becoming sticky. This has yet to do this which is wonderful. I can’t use epoxy due to allergic reaction and UV resins are not always the best choice for a piece. I’ve used this for earring pieces and literally dipped the item in then monitored them for the drips and then wiped them off until the excess had run off. This has also been great for painting onto item which are larger. I can’t use apply as much or little as needed, something an epoxy or UV won’t do.

This is the best of the best the gloss is glass like is easy to use you do use this in your kitchen if you want hardly any smell.

After seeing so many people use this as an alternative to resin, I thought I would give it a try. It is more runny than I thought it would be, so you have to be very careful to just use small amounts and do several layers. I do resin pens with glitter and it took 9 thin layers. I did have some pooling at the bottom of the pen also. I applied it with a rubber finger tip at first but switched to a soft small brush after pooling. It helped a little but I still had it. The price is high, so after using I just switched to mini wax polyurethane. In comparison the pens look the same, same issue on pooling and same amount of coats. However, it was a lot cheaper and you get a larger amount. This product is good, but not cost effective for me. I will probably still use it, but maybe on smaller projects.

Does the job beautifully, though its consistency is thin almost like water, so you do need many coats (which they tell you in advance) and no shortcuts - if you use too much of it at once it ripples or cracks when it dries. So, you need to just commit to many layers and follow instructions. However, the result is well worth the patience, not to mention the crucial non-toxicity, which is what sold me on this. The material does self-level very well. Dries super-shiny and durable, and makes colors pop a bit, especially glittery/metallic elements. The only thing I didn't like is - once I opened the can, despite re-sealing very tightly and storing in a dark closet, the material began to turn yellow. It took a few months to really see it, but by now it's VERY visible, and the same problem happened with the matte version. It's not a serious problem because you honestly can't see it with a few thin layers, but if the substance pools even a tiny bit in a corner of the object you're coating - you do see a dark yellow. Considering the health factor and other positives, it's a minor disadvantage.

My first experience with this was terrible. I had to strip it all off which was easy on flat surfaces because it pulled off in sheets. The corners took many hours to remove this not to mention the damage that had to be repaired after I finally got it off. There are no instructions from the manufacturer, instead they send you to a YouTube video at Highline Guitars. You think they would have suggestions on its application. Where did the guy in the YouTube video get his info? I really do not like trying new products because I work so hard to get to a point of applying a finish to possibly have to strip it all off and start over. The problem was I sanded it too soon and it peeled in one spot. You do need to wait about a week so it can cure properly. That said, I had applied this to another piece and waited a week then sanded and buffed. The final result was stunning. It was very close to nitrocellulose lacquer without the fumes, hassle and long wait time to gas off. I applied 5 coats 2 hours apart, waited a week, sanded with 1000 -3000 then buffed. No respiratory protection needed.

Best sealer I have found for my polymer clay jewelry. Beautiful shine and durable. I will absolutely keep using it!

Wish I'd known about this stuff years ago. Would have made it my regular finish. Great coverage, beautiful shiny final coat. I let a portion evaporate in a small container to thicken over a couple days or so for a thicker consistency, but straight out of the container is great for thin coverage.

I’ve used this on a couple of guitars. It works well. I’ve noticed some reviewers are pretty scant on the curing time (10 days or less). This is from the Crystalac site: Cure Time: Since it is waterborne and doesn’t rely on harsh chemicals, Brite Tone can take up to 30 days to fully cure. Personally I let it cure for 6 weeks. There is some difference of opinion regarding dry vs wet sanding (it’s like a Ford vs Chevy debate; heavy on opinion but light on facts). The first guitar I wet sanded after 6 weeks with no issues. The second one I dry sanded after 6 weeks and ended up sanding through. I have it now refinished and hanging for another 6 weeks after which I will wet sand it. The general reason for dry sanding is that this is a water based product and the water in the sandpaper could dilute it. To me this is nonsense. If it is cured it is cured. And I (as have others) have found it wet sands just fine.

Je suis déçue par la présence de bulles, impossible de les éliminer.

I use this product on my polymer clay earrings. It’s an excellent replacement product to use instead of resin. Easy to use with awesome results. Meets all expectations. Will definitely order again when I need to. Highly recommend.

Just finishing a higher end guitar build with Bob Matthew’s and chose this as the finish. Super hard and beautiful glossy finish. Took it to Bowfinishing to sort out bits beyond my skill set and they were so impressed they are looking for a commercial supplier. Easy to apply, quick to dry, catches really well between layers as well as a nitro top coat doesn’t smell and give you a banging headache. Love it and would use again.

I am using it for polymer clay, amazing:)

J'aime beaucoup ce produit. Je confectionne des sous verres et 2 couches de ce produit offre la protection désirée pour les tasses de café par exemple ou verre d'eau froide. Belle brillance également